htc 526 s-off not supported

[shahzad00786]

htc 526 s-off XTC 2 Tool 1.18 not supported

[habeebkambrath]

Originally Posted by shahzad00786

htc 526 s-off XTC 2 Tool 1.18 not supported

are you tried?
please post the logs or screenshot

[shahzad00786]

Originally Posted by habeebkambrath

are you tried?
please post the logs or screenshot

Removing FRP protection
Rebooting to bootloader mode...
Phone DISconnected
WARNING: It seems that your phone is not S-OFF! Please do S-OFF first in case of error
Trying method #2016
ERROR: FRP Remove failed. Is your phone S-OFF?

[shahzad00786]

Reading information...
Using Fastboot mode...
Reading common information
(bootloader) kernel: lk
(bootloader) product: htc_a13wlpp
(bootloader) version: 1.0
(bootloader) imei: 990005707020674
(bootloader) version-main: 1.07.603.5
(bootloader) boot-mode: download
(bootloader) version-baseband: 0.10.C113251011@50613
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 0PM310000
(bootloader) cid: VZW__003
Execution time is 17(ms)
all:
Reading secure flag information
... (bootloader) Device security level S-ON
Execution time is 89(ms)
OKAY
Reading CID information
... (bootloader) cid: VZW__003
Execution time is 21(ms)
OKAY
Reading MEID information
... (bootloader) meid: 99000570702067
Execution time is 18(ms)
OKAY
Read information completed.

[shahzad00786]

Sending oem writesecureflag 0
Execution time is 15(ms)
... FAILPERMISSION DENY (NOT_FIND_SMART_IO)
FAILED (remote: PERMISSION DENY (NOT_FIND_SMART_IO))
Operation finished

[habeebkambrath]

Originally Posted by shahzad00786

Sending oem writesecureflag 0
Execution time is 15(ms)
... FAILPERMISSION DENY (NOT_FIND_SMART_IO)
FAILED (remote: PERMISSION DENY (NOT_FIND_SMART_IO))
Operation finished

i think your system file problem(card),
you have able to access support site(file downloading)?

if not getting support site,error smart card io error..
so please repair filesystem after format..then try to S-OFF

How to repair filesystem after format, etc

[iPhoneUnlocke]

Repair clip and try again......

[shahzad00786]

Sending oem writesecureflag 0
Execution time is 15(ms)
... FAILPERMISSION DENY (NOT_FIND_SMART_IO)
FAILED (remote: PERMISSION DENY (NOT_FIND_SMART_IO))
Operation finished update successful not working same problem

[xtc2clip]

Originally Posted by shahzad00786

Sending oem writesecureflag 0
Execution time is 15(ms)
... FAILPERMISSION DENY (NOT_FIND_SMART_IO)
FAILED (remote: PERMISSION DENY (NOT_FIND_SMART_IO))
Operation finished update successful not working same problem

Can you use this clip is XTC 2 Client?