htc m8wlv sim from unknown source is it possible unlock xtclip?

[victorsky]

6
(bootloader) product: m8_wlv
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B20000
(bootloader) cidnum: VZW__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: f2489bd1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Execution time is 9(ms)
all: Done!

[xtc2clip]

Hello,

Yes, it should be possible to unlock using Sprint tab in XTC 2 Tool.

[victorsky]

Checking server connection...
Communicating with the XTC 2 Clip ...
ERROR: Cannot open smart_io.crd
wht is this error xtc when i try 4 times

[xtc2clip]

Originally Posted by victorsky

Checking server connection...
Communicating with the XTC 2 Clip ...
ERROR: Cannot open smart_io.crd
wht is this error xtc when i try 4 times

1. Wrong disk drive selected.
or.
2. Do this: http://forum.gsmhosting.com/vbb/f961...t-etc-1964648/

[victorsky]

thanks for manual .. i was busy working to solve the problem but because of changing card reader the delicate cables that connect to pc got broken i am remaining with one which is no longer working on the computer that i used to fix sd card with your manual its not unknown devise conected now..when i put on new pc its same ... Checking server connection...
Communicating with the XTC 2 Clip ...
ERROR: Cannot open smart_io.crdbut on another computer its working but still same problem

[xtc2clip]

Originally Posted by victorsky

thanks for manual .. i was busy working to solve the problem but because of changing card reader the delicate cables that connect to pc got broken i am remaining with one which is no longer working on the computer that i used to fix sd card with your manual its not unknown devise conected now..when i put on new pc its same ... Checking server connection...
Communicating with the XTC 2 Clip ...
ERROR: Cannot open smart_io.crdbut on another computer its working but still same problem

If you done the filesystem repair - then it's not XTC 2 Clip problem.
Check your PC for viruses and/or antivirus that may block access to USB drive.

[victorsky]

i have changed windows and used on new pc without antvirus but still the same and fist pc i always use for htc it cant see xtc clip again

[xtc2clip]

Originally Posted by victorsky

i have changed windows and used on new pc without antvirus but still the same and fist pc i always use for htc it cant see xtc clip again

If you can't see the clip as USB drive - then it's a problem of microSD reader or flex.

[victorsky]

i have one flex remain, thanks it worked,but step four the ##786# not working on my verison m8 to enter spc code and reset any solution please

[xtc2clip]

Originally Posted by victorsky

i have one flex remain, thanks it worked,but step four the ##786# not working on my verison m8 to enter spc code and reset any solution please

Not sure what else to suggest, I would master reset it first (from main menu), then let it reboot, and then use 786 code again.
Don't forget that menu may appear in 1-2 minutes, not immediately.

[victorsky]

i tried but nothing so i am just waiting may be you will get solution soon

[xtc2clip]

Originally Posted by victorsky

i tried but nothing so i am just waiting may be you will get solution soon

Just full flash it then, it should restore everything to defaults.