GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > No More Supported Solutions (Dead Products) > No More Supported H/W Products > xtc2cliP

Reply
 
LinkBack Thread Tools Display Modes
Old 02-13-2018, 07:51   #1 (permalink)
No Life Poster
 
Join Date: Nov 2002
Location: Around GSM World
Posts: 710
Member: 17684
Status: Offline
Sonork: 100.1612623
Thanks Meter: 43
Htc s-0ff problem


please help trying to s-off m8 and write cid 1111111 and this is result. Sending oem writesecureflag 0
... (bootloader) SecuritySDInit: counter = 2
(bootloader) m8_init_sd, SD card already power on
(bootloader) [SPEW] GPIO 0 status is 0
(bootloader) sdhci_open: id=0
(bootloader) Initializing MMC host data structure and clock!
(bootloader) mmc slot#2 clock enabled
(bootloader) sdhci_set_clock: slot 2, freq 192000000
(bootloader) GPLL0 is enabled
(bootloader) clock_update_cfg_sd is done
(bootloader) sd clock set done
(bootloader) sdhci_set_bus_width: bus width 0
(bootloader) sdhci_clk_supply: freq 400000
(bootloader) Error: Command never completed
(bootloader) Error: Command timeout error
(bootloader) Error: Command completed with errors
(bootloader) The response for CMD8 does not match the supplied value
(bootloader) Decoded CID fields:
(bootloader) Manufacturer ID: 7f
(bootloader) OEM ID: 0x0
(bootloader) Product Name: 5270
(bootloader) Product revision: 5.2
(bootloader) Product serial number: B4E
(bootloader) Manufacturing date: 2 2015
(bootloader) sdhci_clk_supply: freq 50000000
(bootloader) sdhci_set_bus_width: bus width 1
(bootloader) Done initialization of the card
(bootloader) erase_grpsize: -16777216
(bootloader) erase_grpmult: 261078040
(bootloader) wp_grpsize: 1
(bootloader) wp_grpen: 1
(bootloader) perm_wp: 0
(bootloader) temp_wp: 0
(bootloader) [Tuxera][Error] No exFAT partition found
(bootloader) [JAVACARD_ERR] get Decrease Renew Cycle fail, SW= 6986
(bootloader) writesecureflag: Permission denied, value 8
OKAY
Execution time is 4(s)
Operation finished
  Reply With Quote
Old 02-13-2018, 07:55   #2 (permalink)
No Life Poster
 
Join Date: Nov 2002
Location: Around GSM World
Posts: 710
Member: 17684
Status: Offline
Sonork: 100.1612623
Thanks Meter: 43
Write cid 1111111

also write cid result.Sending oem writecid 11111111
... (bootloader) SecuritySDInit: counter = 3
(bootloader) m8_init_sd, SD card already power on
(bootloader) [SPEW] GPIO 0 status is 0
(bootloader) sdhci_open: id=0
(bootloader) Initializing MMC host data structure and clock!
(bootloader) mmc slot#2 clock enabled
(bootloader) sdhci_set_clock: slot 2, freq 192000000
(bootloader) GPLL0 is enabled
(bootloader) clock_update_cfg_sd is done
(bootloader) sd clock set done
(bootloader) sdhci_set_bus_width: bus width 0
(bootloader) sdhci_clk_supply: freq 400000
(bootloader) Error: Command never completed
(bootloader) Error: Command timeout error
(bootloader) Error: Command completed with errors
(bootloader) The response for CMD8 does not match the supplied value
(bootloader) Decoded CID fields:
(bootloader) Manufacturer ID: 7f
(bootloader) OEM ID: 0x0
(bootloader) Product Name: 5270
(bootloader) Product revision: 5.2
(bootloader) Product serial number: B4E
(bootloader) Manufacturing date: 2 2015
(bootloader) sdhci_clk_supply: freq 50000000
(bootloader) sdhci_set_bus_width: bus width 1
(bootloader) Done initialization of the card
(bootloader) erase_grpsize: -16777216
(bootloader) erase_grpmult: 261077976
(bootloader) wp_grpsize: 1
(bootloader) wp_grpen: 1
(bootloader) perm_wp: 0
(bootloader) temp_wp: 0
(bootloader) [Tuxera][Error] No exFAT partition found
(bootloader) [JAVACARD_ERR] get Decrease Renew Cycle fail, SW= 6986
(bootloader) Start Verify: 3
(bootloader) Start Verify: 3
(bootloader) deinit_lcd
(bootloader) mipi display off
(bootloader) mdp_clock_off
(bootloader) disable_mmss_clk done
(bootloader) pll1_disable done
(bootloader) TZ_HTC_SVC_DISABLE ret = -1610744452 (0x9FFDFD7C)
(bootloader) [CRITICAL] SPMI write command failure: cmd_id = 0, error
(bootloader) = 4
(bootloader) [CRITICAL] SPMI write command failure: cmd_id = 0, error
(bootloader) = 4
(bootloader) [ERR] Cannot halt SPMI arbiter!!
(bootloader) [INFO] Rebooting device
  Reply With Quote
Old 02-13-2018, 08:05   #3 (permalink)
No Life Poster
 
deepakgarg's Avatar
 
Join Date: Jan 2006
Location: Chandigarh,India
Age: 40
Posts: 5,790
Member: 220603
Status: Offline
Thanks Meter: 1,164
did u connect clip to phones sd slot?
  Reply With Quote
Old 02-13-2018, 08:06   #4 (permalink)
No Life Poster
 
Join Date: Nov 2002
Location: Around GSM World
Posts: 710
Member: 17684
Status: Offline
Sonork: 100.1612623
Thanks Meter: 43
Info

reading info.Reading information...
Using Fastboot mode...
Reading common information
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.12.401.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH43AWM04808
(bootloader) imei: 358714055637965
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Execution time is 31(ms)
Reading CID information
... (bootloader) cid: HTC__J15
OKAY
Execution time is 62(ms)
Reading MEID information
... (bootloader) meid: 00000000000000
OKAY
Execution time is 62(ms)
Reading IMEI1 information
... (bootloader) imei: 358714055637965
OKAY
Execution time is 46(ms)
Reading IMEI2 information
... (bootloader) readimei2: Not Support
OKAY
Execution time is 62(ms)
Reading secure flag information
... (bootloader) secure_flag: 3
OKAY
Execution time is 46(ms)
Reading serial number information
... (bootloader) [ERR] Command error !!!
OKAY
Execution time is 46(ms)
Read information completed.
  Reply With Quote
Old 02-13-2018, 08:10   #5 (permalink)
No Life Poster
 
Join Date: Nov 2002
Location: Around GSM World
Posts: 710
Member: 17684
Status: Offline
Sonork: 100.1612623
Thanks Meter: 43
yes

yes clip connected and detected in fastboot mode
  Reply With Quote
Old 02-13-2018, 08:17   #6 (permalink)
No Life Poster
 
deepakgarg's Avatar
 
Join Date: Jan 2006
Location: Chandigarh,India
Age: 40
Posts: 5,790
Member: 220603
Status: Offline
Thanks Meter: 1,164
try repair format clip and perform task again
  Reply With Quote
Old 02-13-2018, 21:41   #7 (permalink)
Freak Poster
 
Join Date: Mar 2008
Location: colombia
Posts: 223
Member: 738323
Status: Offline
Sonork: 1618038
Thanks Meter: 69
unlock bootloader and rep......
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 08:42.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.18617 seconds with 8 queries

SEO by vBSEO