HTC_One M8 MID change

[Sukavanucci]

Does anybody have a fast and smooth solution how to change Model ID on M8, At the moment im running Europe MID, but would like to change it into AT&T So I could get rid of the demo and perform system update in the system.

Please help

[xtc2clip]

Hello,

With XTC 2 Clip connected to the phone, boot to fastboot (VOL_DOWN+PWR), run XTC 2 Tool, open "Direct mode commands" and press " Write MEID". That's all!

[Sukavanucci]

I want it to change into this MEID 0P6B12000 but it gave me an error, saying it must be 14-digits long. Sorry if i don't know the basics yet, im a beginner.

[hoang555]

follows the tutorial on XDA, not so hard, only by entering some adb commands

[Sukavanucci]

[how to] change your MID without an eng boot… | HTC One (M8)

I tried the AT&T option, and it gave me an error stating that dd is not recognized as a command or smth. Would be much more easier if i could do it with xtc2clip.

[xtc2clip]

Originally Posted by Sukavanucci

[how to] change your MID without an eng boot… | HTC One (M8)

I tried the AT&T option, and it gave me an error stating that dd is not recognized as a command or smth. Would be much more easier if i could do it with xtc2clip.

You have my reply, check second message in this post.
It's not a good idea to follow some xda threads, while you already have a handy tool like XTC 2 Tool.

[Sukavanucci]

I tried it with direct mode already, had an error:Error: MEID must be 14 digits

[xtc2clip]

Originally Posted by Sukavanucci

I tried it with direct mode already, had an error:Error: MEID must be 14 digits

Sorry, I was talking about MEID, not MID.

As to MID - don't do this. You can do it in fastboot mode by using 'oem writemid XXXXXXXX", but I do NOT recommend you to do this.

Firmwares are NOT interchangeable, so, for example, M8_UL cannot be properly flashed to M8_WHL, etc.

[Sukavanucci]

So the only solution to get rid of demo, is to still use supercid and unlocked/developer ruu? There is only android 5.0.2 version out there of unlocked version. But i need 6.0 , so the system would say"there are no updates" instead of "software is modified"

[Sukavanucci]

I also tried this command 'oem writemid XXXXXXXX" because i have nothing to lose, but it still gave me an error

[xtc2clip]

Originally Posted by Sukavanucci

So the only solution to get rid of demo, is to still use supercid and unlocked/developer ruu? There is only android 5.0.2 version out there of unlocked version. But i need 6.0 , so the system would say"there are no updates" instead of "software is modified"

Did you try just to flash the M8 6.0 firmware?

[Sukavanucci]

No, i don't have 6.0 ruu.exe

[xtc2clip]

Originally Posted by Sukavanucci

No, i don't have 6.0 ruu.exe

Does it exist at all? Are you saying that ATT M8 has 6.0?

[Sukavanucci]

I just need a solution to change model id into at&t , so when i give the phone at&t cid, it will update itself in the system. I don't know if 6.0 is out as a ruu. But i know that m8-s will get 6.0

[jawi]

Originally Posted by Sukavanucci

I just need a solution to change model id into at&t , so when i give the phone at&t cid, it will update itself in the system. I don't know if 6.0 is out as a ruu. But i know that m8-s will get 6.0

Bro 6.0 is not out for m8 or m9. If u want u can install custom Rom. And chk ur bootloader is lock or unlock. If it is unlock then lock the bootloader. So u can have Ota when is out