Introducing XTC 2 Clip PowerAdapter - your HTC must-have for 2017!

[goodman_east]

cannot unlock bootloader with poweradapter?

Starting bootloader unlock procedure
Phone detected, reading token...
Token detected successfully
Checking server connection...
Communicating with the XTC 2 Clip ...
ERROR: Clip communication error 10

[icejack]

I try D530 s-off

Sending oem writesecureflag 0
... (bootloader) HTC KEY CARD VERSION: 7
FAILPERMISSION DENY (GT_CONNECT_FAIL)
FAILED (remote: PERMISSION DENY (GT_CONNECT_FAIL))
Execution time is 1(s)
Operation finished

How fix it, or any step wrong?

[icejack]

I try two model D530 and U Ultra s-off use PowerAdapter.
But got error

Sending oem writesecureflag 0
... (bootloader) HTC KEY CARD VERSION: 7
FAILPERMISSION DENY (GT_CONNECT_FAIL)
FAILED (remote: PERMISSION DENY (GT_CONNECT_FAIL))
Execution time is 1(s)
Operation finished

What's problem?

[scotty85]

Originally Posted by icejack

I try two model D530 and U Ultra s-off use PowerAdapter.
But got error

What's problem?

See post #73

Sent from my 2PYB2 using Tapatalk

[sabpprook]

Originally Posted by xtc2clip

XTC 2 PowerAdapter is an add-on for your XTC 2 Clip, it's not a standalone product.
Internet connection is required for operation.

Everything are ready, and how do i do "online operation" with this adapter?

If replace old smart card with adapter and do it as usual, you will only get this error.

FAILPERMISSION DENY (GT_CONNECT_FAIL)
FAILED (remote: PERMISSION DENY (GT_CONNECT_FAIL))

And you can not get access to support site with the adapter inserted.


I've notice that adapter has a microusb connector, seems we need a new software to do operations, right?

[sabpprook]

Found something interesting...

It shows the UI, but the functions are not implemented yet..

[allumts]

Originally Posted by scotty85

Internet connection should not be required for offline mode.

The clip works the same with the power adapter as it did the original sim

Sent from my 2PYB2 using Tapatalk

You are Wrong, "Power Adapter" is one Add On and NOT work Standalone, Must requisite "INTERNET CONNECTION", for this goes Connected to Pc with XTC2CLIP.... and no one has thinked that also Y Cable Existe.

Br

[scotty85]

Originally Posted by allumts

You are Wrong, "Power Adapter" is one Add On and NOT work Standalone, Must requisite "INTERNET CONNECTION", for this goes Connected to Pc with XTC2CLIP.... and no one has thinked that also Y Cable Existe.

Br

you have no idea if im wrong or not. you are taking a comment and assuming its most literal meaning.

the clip currently needs an internet connection to work. but it still has an offline mode.

since the "power adapter" is nothing more than a new eng sim,stands to reason the clip can still be used in an offline mode. this is a reasonable assumption.

maybe the power adapter does need a constant connection via the micro sd port,we dont really know. as usual,support and information about this new product is vauge at best

[allumts]

@scotty85, i'm tired of answer to you, so please Wait when "Product Manager" show you and other one Video or clear some Error...

Good lucky

[sabpprook]

Originally Posted by allumts

You are Wrong, "Power Adapter" is one Add On and NOT work Standalone, Must requisite "INTERNET CONNECTION", for this goes Connected to Pc with XTC2CLIP.... and no one has thinked that also Y Cable Existe.

Br

So, do you have the adapter and get work with "HTC KEY V7" phone???

[scotty85]

Originally Posted by allumts

@scotty85, i'm tired of answer to you, so please Wait when "Product Manager" show you and other one Video or clear some Error...

Good lucky

im tired of answer you too. you answer without any knowledge. do you have the power adapter? have you successfully used it to s off u ultra,play or 11??

wait for product manager is the best advice you have given so far.

[860777706]

I've got the PowerAdapte, but there is no response to the XTC 2 clip. Please follow the instructions. Thank you!

[Deeblog]

Originally Posted by sabpprook

Found something interesting...

It shows the UI, but the functions are not implemented yet..

This is how I read this

Please connect XTC 2 PowerAdapter to your PC (via micro USB cable AND), to XTC 2 CLIP (remove old smart card and insert power adapter) and connect phone in download mode Press WRITE SECURITY (S-OFF)

So Power adapter is inserted into XTC2clip and plug micro USB into the other end of power adapter (hence called power adapter????)
If you look at the power adapter "sim part" it has separate circuits as apposed to the smart card
Then use selection on program

LMK how you get on HTC u11 arrived today and Power Adapter on the way

[Deeblog]

Originally Posted by Deeblog

This is how I read this

Please connect XTC 2 PowerAdapter to your PC (via micro USB cable AND), to XTC 2 CLIP (remove old smart card and insert power adapter) and connect phone in download mode Press WRITE SECURITY (S-OFF)

So Power adapter is inserted into XTC2clip and plug micro USB into the other end of power adapter (hence called power adapter????)
If you look at the power adapter "sim part" it has separate circuits as apposed to the smart card
Then use selection on program

LMK how you get on HTC u11 arrived today and Power Adapter on the way

In summary.....

PC > Micro usb cable > Power Adapter > Smartcard Slot on XTC2CLIP > Flex ribbon > SD Card Slot

Phone in download mode.

[lcminh56]

Originally Posted by Deeblog

In summary.....

PC > Micro usb cable > Power Adapter > Smartcard Slot on XTC2CLIP > Flex ribbon > SD Card Slot

Phone in download mode.

1-connect XTC 2 PowerAdapter to your PC, to XTC 2 Clip

2-connect your phone in download mode to the computer.

3-Then select desired operation and perform it.