M8 getting error during making s-off

[ub mobiles]

Sending oem writesecureflag 0
... (bootloader) SecuritySDInit: counter = 4
(bootloader) m8_init_sd, SD card already power on
(bootloader) [SPEW] GPIO 0 status is 0
(bootloader) sdhci_open: id=0
(bootloader) Initializing MMC host data structure and clock!
(bootloader) mmc slot#2 clock enabled
(bootloader) sdhci_set_clock: slot 2, freq 192000000
(bootloader) GPLL0 is enabled
(bootloader) clock_update_cfg_sd is done
(bootloader) sd clock set done
(bootloader) sdhci_set_bus_width: bus width 0
(bootloader) sdhci_clk_supply: freq 400000
(bootloader) Error: Command never completed
(bootloader) Error: Command timeout error
(bootloader) Error: Command completed with errors
(bootloader) The response for CMD8 does not match the supplied value
(bootloader) Decoded CID fields:
(bootloader) Manufacturer ID: 7f
(bootloader) OEM ID: 0x0
(bootloader) Product Name: 5270
(bootloader) Product revision: 5.2
(bootloader) Product serial number: B4E
(bootloader) Manufacturing date: 2 2015
(bootloader) sdhci_clk_supply: freq 50000000
(bootloader) sdhci_set_bus_width: bus width 1
(bootloader) Done initialization of the card
(bootloader) erase_grpsize: -16777216
(bootloader) erase_grpmult: 261078040
(bootloader) wp_grpsize: 1
(bootloader) wp_grpen: 1
(bootloader) perm_wp: 0
(bootloader) temp_wp: 0
(bootloader) [Tuxera][Error] MBR does not have Boot Signature
(bootloader) [FAT_ERROR] No FAT partition found
(bootloader) [FAT_ERROR] fat_open_file: load bpb fail(-22)
(bootloader) [JAVACARD_ERR] SMART_IO.CRD cann't find
(bootloader) writesec
Operation finished

Flex is inserted well.

[ub mobiles]

Sending oem writesecureflag 0
... (bootloader) SecuritySDInit: counter = 2
(bootloader) memul_init_sd, SD card already power on
(bootloader) memul_init_sd, SD card io already power on
(bootloader) sdhci_open: id=0
(bootloader) Initializing MMC host data structure and clock!
(bootloader) mmc slot#2 clock enabled
(bootloader) clock_config_mmc: slot 2, freq 192000000
(bootloader) GPLL0 is enabled
(bootloader) clock_update_cfg_sd is done
(bootloader) sd clock set done
(bootloader) sdhci_set_bus_width: bus width 0
(bootloader) sdhci_clk_supply: freq 400000
(bootloader) Error: Command never completed
(bootloader) Error: Command completed with errors
(bootloader) Decoded CID fields:
(bootloader) OEM ID: 0x0
(bootloader) Product revision: 5.2
(bootloader) Manufacturing date: 2 2015
(bootloader) Decoded CSD fields:
(bootloader) card_cmd_class: 5f5
(bootloader) read_blk_len: 512
(bootloader) sector_size: 128
(bootloader) c_size: 506
(bootloader) taac_ns: 70000
(bootloader) erase_blk_len: 0
(bootloader) write_blk_misalign: 0
(bootloader) write_blk_partial: 0
(bootloader) sdhci_set_bus_width: bus width 1
(bootloader) erase_grpsize: 49152
(bootloader) wp_grpsize: 1
(bootloader) perm_wp: 0
(bootloader) [Tuxera][Error] MBR does not have Boot Signature
(bootloader) [FAT_ERROR] fat_open_file: load bpb fail(-22)
(bootloader) writesecureflag: Permission denied, value 1
Execution time is 1125(ms)
OKAY
Operation finished

hct one mini 2 still same problem may be my box dead?

[ub mobiles]

where is supporter I need help

[xtc2clip]

Hello,

Please do this:

http://forum.gsmhosting.com/vbb/f961...t-etc-1964648/

and then repeat desired operation.