one m9u no download mode, recovery and RUU
i have bricked M9u OPJA100 Code:
Reading information...
Using Fastboot mode...
Reading common information
(bootloader) version:0.5
(bootloader) variant:MTP eMMC
(bootloader) secure:yes
(bootloader) version-baseband:
(bootloader) version-bootloader:
(bootloader) max-download-size: 0x20000000
(bootloader) partition-type:cache:ext4
(bootloader) partition-size:cache: 0x14000000
(bootloader) partition-type:userdata:ext4
(bootloader) partition-size:userdata: 0x5e0000000
(bootloader) partition-type:system:ext4
(bootloader) partition-size:system: 0x118000000
(bootloader) serialno:FA555YJ07346
all:
Execution time is 145(ms)
Reading CID information
... FAILunknown command
FAILED (remote: unknown command)
Execution time is 11(ms)
Reading MEID information
... FAILunknown command
FAILED (remote: unknown command)
Execution time is 13(ms)
Reading IMEI1 information
... FAILunknown command
FAILED (remote: unknown command)
Execution time is 13(ms)
Reading IMEI2 information
... FAILunknown command
FAILED (remote: unknown command)
Execution time is 17(ms)
Reading secure flag information
... (bootloader) read secure flag: 3
OKAY
Execution time is 24(ms)
Reading serial number information
... FAILunknown command
FAILED (remote: unknown command)
Execution time is 1(s)
Read information completed.
i am try flash n70_hosd_signed_uhl_4.18.1020.1_R1.img Code:
C:\1>fastboot flash hosd n70_hosd_signed_uhl_4.18.1020.1_R1.img
target reported max download size of 536870912 bytes
sending 'hosd' (24136 KB)...
OKAY [ 0.797s]
writing 'hosd'...
OKAY [ 0.515s]
finished. total time: 1.311s
but not result. any solution for my phone. may i am flash wrong hosd? successfully write only from UHL. I am tried for all OS. 5.1/6.0.1/7.0 | 