Problem with One Mini 2

[GsmHgvnl]

Im trying to S-off and change the cid of a HTC One mini 2
But when i put the xtc2clip in the device and go to simlock, the phones say:

SD Init fail !!

Please Help!

[Smart-gsm]

Power of phone
Connect xtc2clip to phone
Put phone I'm boot loader mode
And go simlocl

[Smart-gsm]

Originally Posted by GsmHgvnl

Im trying to S-off and change the cid of a HTC One mini 2
But when i put the xtc2clip in the device and go to simlock, the phones say:

SD Init fail !!

Please Help!

If my above answer is not helpful for you

You can try this .,
http://forum.gsmhosting.com/vbb/f961...t-etc-1964648/

[GsmHgvnl]

Originally Posted by Smart-gsm

If my above answer is not helpful for you

You can try this .,
http://forum.gsmhosting.com/vbb/f961...t-etc-1964648/

This is not working, see picture

[xtc2clip]

Originally Posted by GsmHgvnl

This is not working, see picture

You must close all programs which may use the drive, like file managers, open folders, etc.
Or better disconnect the clip and connect it back, and then repeat the procedure.

[GsmHgvnl]

i already have another mini 2 white this works fine but with the 2 pcs dark grey it wont work

[xtc2clip]

Originally Posted by GsmHgvnl

i already have another mini 2 white this works fine but with the 2 pcs dark grey it wont work

It can't be so. What's the firmware version of your 'gray mini 2' ?

[GsmHgvnl]

Sending getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.101.1102.19.0708
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.18.166.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH45SWR06988
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: mem_ul
(bootloader) platform: hTCBmsm8226
(bootloader) modelid: 0P8B20000
(bootloader) cidnum: VODAP120
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 7ad7ebac
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Execution time is 16(ms)
all: Done!

[xtc2clip]

Please send log from direct mode.

[GsmHgvnl]

see the 2 pictures with the errors!

[xtc2clip]

Originally Posted by GsmHgvnl

see the 2 pictures with the errors!

Try using Y-cable.
It can't work on one phone and not work on another phone...

[TMAC1122]

hello, how to S-Off HTC one mini 2 with Android 4.4.2..??
Model : MEM_UL
IMEI : 351574067287184
Build : 1.16.61.2
CID : ORANG001
HBoot : 3.18.0.0000
MID : 0P8B20000
Security : ON
Region : ORANGE-UK

[xtc2clip]

Originally Posted by TMAC1122

hello, how to S-Off HTC one mini 2 with Android 4.4.2..??
Model : MEM_UL
IMEI : 351574067287184
Build : 1.16.61.2
CID : ORANG001
HBoot : 3.18.0.0000
MID : 0P8B20000
Security : ON
Region : ORANGE-UK

Using offline mode and Y cable.

http://forum.gsmhosting.com/vbb/f961...-step-1964502/

[RICKANBACKER]

hi rickanbacker here i have a y cable my pc will not reconise it

[xtc2clip]

Originally Posted by RICKANBACKER

hi rickanbacker here i have a y cable my pc will not reconise it

Your PC cannot "recognize" Y cable. It's connected to the PC just for power. Just follow the unlock manual.