problem with xtc2clip [SOLVED]

[mzn1480]

xtc2clip not s-off eror
Sending oem writesecureflag 0
... (bootloader) SecuritySDInit: counter = 2
(bootloader) a3ul_init_sd, SD card already power on
(bootloader) a3ul_init_sd, SD card io already power on
(bootloader) a3ul_init_sd: SKU AHD#1 or AHD#2
(bootloader) sdhw_7xxx_open: id=0
(bootloader) clock_update_cfg_sd is done
(bootloader) sd clock set done
(bootloader) clock_update_cfg_sd is done
(bootloader) sd clock set done
(bootloader) [DEBUG] Cmd8 polling status timed out, MCI_STATUS: 0xC0000
(bootloader) [DEBUG] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [DEBUG] Cmd8 polling status timed out, MCI_STATUS: 0xC0000
(bootloader) [DEBUG] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [DEBUG] Cmd8 polling status timed out, MCI_STATUS: 0xC0000
(bootloader) [DEBUG] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) sdcc_init_memory_device done
(bootloader) SD clock freq = 19MHz....
(bootloader) GPLL0 is enabled
(bootloader) clock_update_cfg_sd is done
(bootloader) sd clock set done
(bootloader) [Tuxera][Error] No exFAT partition found
(bootloader) [JAVACARD_ERR] get Decrease Renew Cycle fail, SW= 6986
(bootloader) writesecureflag: Permission denied, value 8
OKAY
finished. total time: 3.009s
htc_fastboot finished
Operation finished

[xtc2clip]

Hello!

Please run XTC 2 Client 1.4 and then PM me with your clip ID, we will fix it.

Thanks!

[mzn1480]

where is clip id? go is inactive in my software

[mzn1480]

xxxxxx is my dongle serial number

[xtc2clip]

You may now run XTC 2 Client once again and re-activate your clip.

[mzn1480]

thanks solve problem