U11 IMEI repair & SIM unlock instructions
 

Dear customers,

In this guide you will find information about how to repair IMEI / IMEI2 and SIM unlock U11 phone.

SPRINT phones (OCEAN_WHL) users - please note, that we haven't fully tested it with Sprint phones, so please process at your own risk.

IMEI repair

IMEI repair is done in 2 parts.

Part 1 is to repair IMEI in download mode using PowerAdapter:

Important! If you have already repaired IMEI in download mode you can SKIP this step.
Important! If you need only to SIM Unlock phone you must SKIP this step.

1. Open "PowerAdapter" tab in XTC 2 Tools 1.34 or higher
2. Connect XTC 2 Clip to the SD slot of your phone, and insert PowerAdapter to the clip and to PC.
3. Press "Trusted Reboot" button and wait for it to finish.
4. Enter new IMEI/IMEI2 and press "Write IMEI" and/or "Write IMEI2"
5. Done, we have written download mode IMEI numbers.

Part 2 is to sync IMEI to OS using "U11 IMEI & SIM Unlock" tab.

1. Open "U11 IMEI & SIM Unlock" tab in XTC 2 Tools 1.34 or higher
2. Download U11 recovery: https://xtc2.net/downloads/U11_recovery_xtc2.zip and UNPACK it before using.
3. Follow built-in instructions.

SIM Unlock

At this moment we have tested SIM Unlocking only with phones which ASK for unlock code.

How to SIM Unlock your U11

1. Open "U11 IMEI & SIM Unlock" tab in XTC 2 Tools 1.34 or higher
2. Follow built-in instructions.

Should you have any questions - please post it here.





Thank you!

Don't think this method will work with Sprint variant

Is permanent repair imei in HTC U11?

Enviado desde mi HTC One_M8 mediante Tapatalk

1. Checking phone connectivity...
Phone connection confirmed!
HTC KEY CARD VERSION: 7
2. Checking Server connectivity...
Server connection confirmed!
3. Checking PowerAdapter connectivity...
Process started
PowerAdapter connected, processing request to adapter...
Starting operation...
Sending oem writeimei 358182085051633
... (bootloader) [ERR] Command error !!!
OKAY
Execution time is 5(ms)
Operation completed!
Releasing adapter.
Request completed

Please help...

The trusted reboot dont work, please help...

hello, repair imei, now the second step does not work, because I do it as it says in the manual and it does not work, please help ...

hi sir i try this option but not work can help me i need change imei

this read log info mobile .

Reading information...
Using Fastboot mode...
Reading common information
(bootloader) kernel: lk
(bootloader) product: htc_ocndugl
(bootloader) version: 1.0
(bootloader) max-download-size: 2400800000
(bootloader) serialno: FA7841801489
(bootloader) slot-count: 0
(bootloader) current-slot:
(bootloader) imei: 356133083318450
(bootloader) version-main: 1.13.401.1
(bootloader) boot-mode: download
(bootloader) version-baseband: 8998-001791-1705231845
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PZC30000
(bootloader) cid: HTC__J15
all:
Execution time is 16(ms)
Reading CID information
... (bootloader) cid: HTC__J15
OKAY
Execution time is 10(ms)
Reading MEID information
... (bootloader) meid:
OKAY
Execution time is 6(ms)
Reading IMEI1 information
... (bootloader) imei: 356133083318450
OKAY
Execution time is 16(ms)
Reading IMEI2 information
... (bootloader) imei2: 356133083318468
OKAY
Execution time is 10(ms)
Reading secure flag information
... (bootloader) Device security level S-ON
OKAY
Execution time is 14(ms)
Reading serial number information
... (bootloader) Device Serial No. is FA7841801489
OKAY
Execution time is 10(ms)
Read information completed.
.................................................. ...............................

and this read log change imei with powerAdpter.


Phone DISconnected
1. Checking phone connectivity...
Warning! Your phone does not see the XTC 2 Clip, please try to reconnect it, and then reboot to download/fastboot mode. In case of failure again, check your flex cable for damage.
Phone connection confirmed!
HTC KEY CARD VERSION: 7
2. Checking Server connectivity...
Server connection confirmed!
3. Checking PowerAdapter connectivity...
PowerAdapter connected, processing request to adapter...
Process started
Starting operation...
Sending oem reboot-download
... OKAY
Execution time is 6(ms)
Waiting for the phone to reboot...
Phone connected [FA7841801489] *** Fastboot mode
Phone connected
Sending oem writeimei 356133083318435
... (bootloader) [ERR] Command error !!!
OKAY
Execution time is 5(ms)
Operation completed!
Releasing adapter.
Request completed
.................................................. ...................................

.. (bootloader) [ERR] Command error !!! ?????????
Report Post

i change flex cabel and card redar and updat xtc2clip
only error :


.. (bootloader) [ERR] Command error !!! ?????????
Report Post

S-OFF not work?
FRP?

FRP OK with "new method" :-)

sir i need change imei number

can help me

"U11 IMEI & SIM Unlock" tab.

power adapter, Write imei OK
unlock bootloader After flash recovery, but phone no recovery
Other model or what?

mid: 2PZC10000
product: htc_ocnuhl

now is different os imei and bootloader imei.

5 x successfully flash U11_recovery_xtc2.img.
But it can not be to recovery menu, button, or command:-(

Help please!

Step 1 write imei done
but step 2 after flashing xtc2 recovery img to devices and it can`t boot into recovery mode
maybe there is something wrong about the img file ?

same here all prtocedure is ok..after successfully flashing recovery ,no recovery