xtc 2 clip semi-dead ?

[cipriti]

Hy! I can't unlock or s-off any phone but I can download files from support. My clip is recognized by xtc pc software but not recognized by phones.
Direct mode s-off
Sending oem writesecureflag 0
... (bootloader) SecuritySDInit: counter = 3
(bootloader) a16dwg_init_sd, SD card already power on
(bootloader) a16dwg_init_sd, SD card io already power on
(bootloader) sdhci_open: id=0
(bootloader) Initializing MMC host data structure and clock!
(bootloader) mmc slot#2 clock enabled
(bootloader) sdhci_set_clock: slot 2, freq 192000000
(bootloader) GPLL0 is enabled
(bootloader) clock_update_cfg_sd is done
(bootloader) sd clock set done
(bootloader) sdhci_set_bus_width: bus width 0
(bootloader) sdhci_clk_supply: freq 400000
(bootloader) Error: Command never completed
(bootloader) Error: Command timeout error
(bootloader) Error: Command completed with errors
(bootloader) The response for CMD8 does not match the supplied value
(bootloader) Decoded CID fields:
(bootloader) Manufacturer ID: 7f
(bootloader) OEM ID: 0x0
(bootloader) Product Name: 5270
(bootloader) Product revision: 5.2
(bootloader) Product serial number: B4E
(bootloader) Manufacturing date: 2 2015
(bootloader) sdhci_clk_supply: freq 50000000
(bootloader) sdhci_set_bus_width: bus width 1
(bootloader) Done initialization of the card
(bootloader) erase_grpsize: 0
(bootloader) erase_grpmult: 96
(bootloader) wp_grpsize: 1
(bootloader) wp_grpen: 1
(bootloader) perm_wp: 0
(bootloader) temp_wp: 0
(bootloader) [Tuxera][Error] No exFAT partition found
(bootloader) [JAVACARD_ERR] verify javacard: get signature fail, SW= 6f00
(bootloader) writesecureflag: Permission denied, value 4
OKAY
Execution time is 2(s)
Operation finished

also sd mode not working

https://imgur.com/a/0Ng91
https://imgur.com/a/0Yrha

Any ideas?

[otherboy123]

Originally Posted by cipriti

Hy! I can't unlock or s-off any phone but I can download files from support. My clip is recognized by xtc pc software but not recognized by phones.
Direct mode s-off
Sending oem writesecureflag 0
... (bootloader) SecuritySDInit: counter = 3
(bootloader) a16dwg_init_sd, SD card already power on
(bootloader) a16dwg_init_sd, SD card io already power on
(bootloader) sdhci_open: id=0
(bootloader) Initializing MMC host data structure and clock!
(bootloader) mmc slot#2 clock enabled
(bootloader) sdhci_set_clock: slot 2, freq 192000000
(bootloader) GPLL0 is enabled
(bootloader) clock_update_cfg_sd is done
(bootloader) sd clock set done
(bootloader) sdhci_set_bus_width: bus width 0
(bootloader) sdhci_clk_supply: freq 400000
(bootloader) Error: Command never completed
(bootloader) Error: Command timeout error
(bootloader) Error: Command completed with errors
(bootloader) The response for CMD8 does not match the supplied value
(bootloader) Decoded CID fields:
(bootloader) Manufacturer ID: 7f
(bootloader) OEM ID: 0x0
(bootloader) Product Name: 5270
(bootloader) Product revision: 5.2
(bootloader) Product serial number: B4E
(bootloader) Manufacturing date: 2 2015
(bootloader) sdhci_clk_supply: freq 50000000
(bootloader) sdhci_set_bus_width: bus width 1
(bootloader) Done initialization of the card
(bootloader) erase_grpsize: 0
(bootloader) erase_grpmult: 96
(bootloader) wp_grpsize: 1
(bootloader) wp_grpen: 1
(bootloader) perm_wp: 0
(bootloader) temp_wp: 0
(bootloader) [Tuxera][Error] No exFAT partition found
(bootloader) [JAVACARD_ERR] verify javacard: get signature fail, SW= 6f00
(bootloader) writesecureflag: Permission denied, value 4
OKAY
Execution time is 2(s)
Operation finished

also sd mode not working

https://imgur.com/a/0Ng91
https://imgur.com/a/0Yrha

Any ideas?

U have to write security 0 from xtc card and than inside xtc card and than put in your phone hboot .

Sent from my MI 6 using Tapatalk

[cipriti]

not working , check keycard failed

[nvda3]

me too please xtc team support

[xtc2clip]

Hello,

I have checked - your smartcard is good, please try to do filesystem repair:

http://forum.gsmhosting.com/vbb/f961...t-etc-1964648/

[cipriti]

I repaired the filesystem but still the same
If I use the power adapter to s-off any phone, this is the log:

1. Checking phone connectivity...
Phone connection confirmed!
Requested card version not detected, version 6 will be used
2. Checking Server connectivity...
Server connection confirmed!
3. Checking PowerAdapter connectivity...
Process started
PowerAdapter connected, processing request to adapter...
Starting operation...
Sending oem writesecureflag 0
... (bootloader) SecuritySDInit: counter = 4
(bootloader) a16dwg_init_sd, SD card already power on
(bootloader) a16dwg_init_sd, SD card io already power on
(bootloader) sdhci_open: id=0
(bootloader) Initializing MMC host data structure and clock!
(bootloader) mmc slot#2 clock enabled
(bootloader) sdhci_set_clock: slot 2, freq 192000000
(bootloader) GPLL0 is enabled
(bootloader) clock_update_cfg_sd is done
(bootloader) sd clock set done
(bootloader) sdhci_set_bus_width: bus width 0
(bootloader) sdhci_clk_supply: freq 400000
Building connection
Data exchange sequence.
(bootloader) Error: Command never completed
(bootloader) Error: Command timeout error
(bootloader) Error: Command completed with errors
(bootloader) The response for CMD8 does not match the supplied value
(bootloader) Decoded CID fields:
(bootloader) Manufacturer ID: 7f
(bootloader) OEM ID: 0x0
(bootloader) Product Name: 5270
(bootloader) Product revision: 5.2
(bootloader) Product serial number: B4E
(bootloader) Manufacturing date: 2 2015
(bootloader) sdhci_clk_supply: freq 50000000
(bootloader) sdhci_set_bus_width: bus width 1
(bootloader) Done initialization of the card
(bootloader) erase_grpsize: 0
(bootloader) erase_grpmult: 96
(bootloader) wp_grpsize: 1
(bootloader) wp_grpen: 1
(bootloader) perm_wp: 0
(bootloader) temp_wp: 0
(bootloader) [Tuxera][Error] No exFAT partition found
Requesting information from server
Requested sent, waiting 3 seconds for reply...
Waiting 3 seconds more...
Processing...
Data exchange completed
Data exchange sequence.
(bootloader) writesecureflag: Permission denied, value 4
OKAY
Execution time is 12(s)
Operation completed!
Releasing adapter.
Request completed

[deepakgarg]

Originally Posted by cipriti

1. Checking phone connectivity...
Phone connection confirmed!
Requested card version not detected, version 6 will be used

it means this phone is supported by old card you cant use power adapter with this phone

[cipriti]

I tried on a lot of models(even version 7 phones) and the phones don't see the clip. The Pc reads the clip ok , all xtc software works ok.

Please help xtc team , can I reactivate the clip ?

[cipriti]

I think the problem is this:

(bootloader) [JAVACARD_ERR] verify javacard: get signature fail, SW= 6f00

Any chance to rewrite the firmware of the sim card inside xtc2clip ?

[xtc2clip]

Originally Posted by cipriti

I think the problem is this:

(bootloader) [JAVACARD_ERR] verify javacard: get signature fail, SW= 6f00

Any chance to rewrite the firmware of the sim card inside xtc2clip ?

Hello,

Please run XTC 2 Client and upgrade, I have enabled this option for you.

[cipriti]

I ran the upgrade and was successfull , but I have the same problems. I need to buy a new clip ?

[xtc2clip]

Originally Posted by cipriti

I ran the upgrade and was successfull , but I have the same problems. I need to buy a new clip ?

Please contact me on Skype, we will try more options to repair your clip.