Pico "Sd init fail" on s-off operation - GSM-Forum

meisam · 09-09-2015, 18:05

Dear support;
I managed to do super cid but tried s-off procedure via sd mode and direct mode but all the time i get "SD Init error!".By the way doing legacy mode does not work for me.What could be the reason please?

Code:

(bootloader) version: 0.5
(bootloader) version-bootloader: 1.07.0000
(bootloader) version-baseband: 1.18.80.18
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.43.720.2
(bootloader) serialno: FA312VN07862
(bootloader) imei: 359918048588354
(bootloader) product: pico
(bootloader) platform: HBOOT-7225A
(bootloader) modelid: PJ0310000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3798mV
(bootloader) partition-layout: HTC
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0d55407a
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
Execution time is 8(ms)
all: Done!

Code:

Sending oem writesecureflag 0
... (bootloader) readsecureflag: secure flag: ON
(bootloader) AMSS is ready
(bootloader) sdc_ns_reg value=0xFF9E0B58 
(bootloader) sdc_ns_reg value=0xFF9E0B58 
(bootloader) [SD_HW_ERR] SD: No device attached
(bootloader) [JAVACARD_ERR] SD Init error
(bootloader) writesecureflag: permission denied, value 1
Execution time is 14185(ms)
OKAY
Operation finished
Reading CID information
... (bootloader) cid: 11111111
Execution time is 6(ms)
OKAY
Read information completed.

meisam · 09-10-2015, 07:21

This is operation log for s-off in legacy mode while i'm sure smart card is inside the phone:

Code:

Trying to perform S-OFF...
Error: The phone has returned an error, command failed. Do you have smartcard inserted into the phone? You may need to S-OFF first also.

Shensohau · 09-10-2015, 13:24

Hi use SD mode and replace clip SD flex cable try and post results!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-10-2015, 07:21	#2 (permalink)
meisam No Life Poster Join Date: Feb 2005 Location: IRAN(land of heros) Age: 44 Posts: 2,680 Member: 115172 Status: Offline Thanks Meter: 212	This is operation log for s-off in legacy mode while i'm sure smart card is inside the phone: Code: Trying to perform S-OFF... Error: The phone has returned an error, command failed. Do you have smartcard inserted into the phone? You may need to S-OFF first also.

09-10-2015, 13:24	#3 (permalink)
Shensohau No Life Poster Join Date: Aug 2010 Location: Inside Logic Age: 37 Posts: 5,882 Member: 1377783 Status: Offline Sonork: 100.1611724 Thanks Meter: 3,335	Hi use SD mode and replace clip SD flex cable try and post results!!!