XTC2Clip Repair Imei HTC ONE MINI??

[xtc2clip]

Originally Posted by simlock

Hi, is y cable special wired for xtc2 2 only ??? i have two new y cables and they dont find clip ??? br

You must connect Y-cable to USB for power, to the phone and insert clip into Y-cable.

[allumts]

Originally Posted by toma2

in cardreader light diode i see have transfer from phone to sd but nothing hapened some times sd not init som times phone restart to normal mode have some truble wit ckip and one mini

@ALL ceck Y cable and if has worked Ceck carefullu SD Reader, 90% of the times is this SD Reader that's damaged, i've used 5 type of sd reader purchased a lot of money and with one LOL sd reader of 5 cent all turned back 100%...

Same things with Y Cable, one LOL Y cable of 50 cent work 1000 times more good of Y cable of 15€.

Tested 100% and try also in Offline mode (Sd Mode) and have proof 100% that's reader issue or Y cable, (if work to many phones ceck also the Flats, replace this, have 3 not for case).

NOTE: if use Sd Mode, cannot use also the PC, just set good "Config. file" then connect USB side to Wall charger for get 5 volt, tested and success 100%

BR
allumts

[allumts]

Originally Posted by simlock

Hi, is y cable special wired for xtc2 2 only ??? i have two new y cables and they dont find clip ??? br

Can be Fake you 2 Y cables, no need one Y cable of 15€, but RIGHT Y cable

BR

allumts

[simlock]

Originally Posted by allumts

Can be Fake you 2 Y cables, no need one Y cable of 15€, but RIGHT Y cable

BR

allumts

Hi bro one is by GPGIndustries ? the other one is cheap just another question do i need y cable to s/off and imei htc m8 mini2 ? thanks br

[rogeliomalpa]

Originally Posted by toma2

in cardreader light diode i see have transfer from phone to sd but nothing hapened some times sd not init som times phone restart to normal mode have some truble wit ckip and one mini

Hi dude, could you achieve the M7 s-off/ Sim unlock?

[rogeliomalpa]

Originally Posted by xtc2clip

You must connect Y-cable to USB for power, to the phone and insert clip into Y-cable.

Staff, me again. I have solved the other issues. Now the only problem that I have is to achieve the sim unlock of a HTC One M7

I know that I first have to s-off.

I have tried many ways and nothing is working for me, but the Y cable is 100% working, the clip is 100% working and my microsd is 100% working.

I have tested these things with another HTCs

Thats my XTC log:

Reading information...
Using Fastboot mode...
Reading common information
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 1.01.20.1225
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.23.651.7
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA38LS903773
(bootloader) imei: 9900014611xxxxx
(bootloader) meid: 990001461xxxxx
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4120mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Execution time is 59(ms)
all: Done!
8064 detected, reading IMEI2 ...
... (bootloader) [ERR] Command error !!!
Execution time is 0(ms)
OKAY
Reading secure flag information
... (bootloader) secure_flag: 3
Execution time is 0(ms)
OKAY
Reading CID information
... (bootloader) cid: SPCS_001
Execution time is 3(ms)
OKAY
Reading MEID information
... (bootloader) meid: 990001461xxxxx
Execution time is 3(ms)
OKAY
Read information completed.