Meizu M5 unknown baseband

[gulka]

Meizu M5 unknown baseband imei null null. Need help

[CS-Tool]

read from same phone/same version and write in another phone

[gulka]

Originally Posted by CS-Tool

read from same phone/same version and write in another phone

Yes, I did. I have a full cst. and NV cst
http://forum.gsmhosting.com/vbb/f967...orted-2268805/

NV does not record. Write error...

Write NVRAM(DownloadMode) - [Click to open]

Action : Write NVRAM(DownloadMode)
Brand: Meizu
Model: Common (MTK)
Tips:
1.Remove Battery, Insert usb cable, Insert battery [Preloader Mode]
2.power off Phone, Remove & Reinsert Battery , insert USB Cable [Preloader Mode]
(In Case Some Phone Required to hold bootkey) [BROM Mode]
Waiting for Phone Usb (Press "F2" to activate fast scan mode)...
HID: USB\VID_0E8D&PID_2000&REV_0100
FNM: MediaTek PreLoader USB VCOM Port (COM6)
Phone found [ USB Port:COM6 ]
Connecting...
Connection Done.
Read CPU Info...
CPU_SW: 0001
CPU_HW: CB00
CPU_ID: 0326[MT6755]
BV: 01
SecConf: 00000007
uploading boot image to RAM...
Handshake received from Phone.
Tips 1: In case some phone required to hold bootkey to enter Brom Mode
Tips 2: SecureBoot phone found, According to the brand, Select the supported signed DA from boots list and try again.
HID: USB\VID_0E8D&PID_0003&REV_0100
FNM: MTK USB Port (COM7)
Phone found [ USB Port:COM7 ]
Connecting...

Action completed
Time taken : 00:00:03
Reconnect Battery/USB Cable
CS-Tool Ver 1.38.2
Connection Done.
Read CPU Info...
CPU_SW: 0001
CPU_HW: CB00
CPU_ID: 0326[MT6755]
BV: FE
SecConf: 00000007
Decryping(Meizu)...ok
uploading boot image to RAM...
Handshake received from Phone.
Getting connection agent status:brom
Init DRAM...
Waiting for DRAM detection...
Selected: 1/3 ...OK
Send boot2 ...
Receive SYNC signal, Boot2 runs normally.
Getting RAM info ...
SRAM: type[0x2] base_address[0x200000] size[0x40000]
DRAM: type[0x1] base_address[0x40000000] size[0x80000000]
Getting H/W info ...
CHIP : MT6755/6750
CPU ID :
EMMC ID : 150100514531334D420D7BF8A8F334C3
EMMC Size: 16GB, usable capacity: 14,57GB
EMMC Name: eMMC_Samsung_QE13MB

Downloading nv file ...
Error: 0xa16. [WriteNV]

Action completed
Time taken : 00:00:03
Reconnect Battery/USB Cable
CS-Tool Ver 1.38.2