tecno phantom 6 all operation done

[fokal2008]

tecno phantom6 read info, read ff, write flash, reset frp, all done by cstool

 Action : Read Info
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM148 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_ID: 0326
 CPU_SW: 0001
 CPU_HW: CB00
 uploading boot image to RAM...
 Handshake received from Phone.
 Getting connection agent status:preloader
 Send boot2 ...
 Receive SYNC signal, Boot2 runs normally.
 Getting RAM info ...
 SRAM: type[0x2] base_address[0x200000] size[0x40000]
 DRAM: type[0x1] base_address[0x40000000] size[0x80000000]
 Getting H/W info ...
 CHIP     : MT6755/6750
 CPU ID   : 
 EMMC ID  : 150100525831424D4207CBB39056832B
 EMMC Size: 32GB,  usable capacity: 29,13GB
 EMMC Name: eMMC_Samsung_RX1BMB
 Boot Information completed.
 
 Reading Project Property ...
 
 Brand          : TECNO
 Phone Model    : Phantom6
 Android Ver    : 6.0
 CPU/Processor  : MT6755
 MTK Project ver: A6-H551C1-M-160920V64
 SW Version     : A6-H551C1-M-160920V64
 
 Action completed
 Time taken : 00:00:07
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.58.2



 Action : Read Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM148 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_ID: 0326
 CPU_SW: 0001
 CPU_HW: CB00
 uploading boot image to RAM...
 Handshake received from Phone.
 Getting connection agent status:preloader
 Send boot2 ...
 Receive SYNC signal, Boot2 runs normally.
 Getting RAM info ...
 SRAM: type[0x2] base_address[0x200000] size[0x40000]
 DRAM: type[0x1] base_address[0x40000000] size[0x80000000]
 Getting H/W info ...
 CHIP     : MT6755/6750
 CPU ID   : 
 EMMC ID  : 150100525831424D4207CBB39056832B
 EMMC Size: 32GB,  usable capacity: 29,13GB
 EMMC Name: eMMC_Samsung_RX1BMB
 
 USB STATUS: high-speed
 
 
 Reading Project Property ...
 done.
 Making dir: C:\\MT6755_TECNO_Phantom6_Android6.0_A6-H551C1-M-160920V64_20170921_121133\...[ok]
 Reading preloader ......ok
 Reading recovery ......ok
 Reading md1img ......ok
 Reading md1dsp ......ok
 Reading md1arm7 ......ok
 Reading md3img ......ok
 Reading nvram ......ok
 Reading lk ......ok
 Reading lk2 ......ok
 Reading boot ......ok
 Reading logo ......ok
 Reading tee1 ......ok
 Reading tee2 ......ok
 Reading secro ......ok
 Reading system ......ok
 Reading cache ......ok
 Reading userdata ......ok
 All done.
 Files saved to: C:\\MT6755_TECNO_Phantom6_Android6.0_A6-H551C1-M-160920V64_20170921_121133\
 
 Action completed
 Time taken : 00:07:56
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.58.2




 Action : Write Flash
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM148 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_ID: 0326
 CPU_SW: 0001
 CPU_HW: CB00
 uploading boot image to RAM...
 Handshake received from Phone.
 Getting connection agent status:preloader
 Send boot2 ...
 Receive SYNC signal, Boot2 runs normally.
 Getting RAM info ...
 SRAM: type[0x2] base_address[0x200000] size[0x40000]
 DRAM: type[0x1] base_address[0x40000000] size[0x80000000]
 Getting H/W info ...
 CHIP     : MT6755/6750
 CPU ID   : 
 EMMC ID  : 150100525831424D4207CBB39056832B
 EMMC Size: 32GB,  usable capacity: 29,13GB
 EMMC Name: eMMC_Samsung_RX1BMB
 
 USB STATUS: high-speed
 
 Loading scatter file ...
 Read CFG done.
 Checking the firmware matches the current BB ...
 firmware is valid.
 Image Format: General
 Downloading preloader ......ok
 Downloading recovery ......ok
 Downloading md1img ......ok
 Downloading md1dsp ......ok
 Downloading md1arm7 ......ok
 Downloading md3img ......ok
 Downloading lk ......ok
 Downloading lk2 ......ok
 Downloading boot ......ok
 Downloading logo ......ok
 Downloading tee1 ......ok
 Downloading tee2 ......ok
 Downloading secro ......ok
 Downloading system ......ok
 Downloading cache ......ok
 Downloading userdata ......ok
 All done.
 
 Action completed
 Time taken : 00:04:28
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.58.2



 Action : Reset all to default
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 Phone found [ USB Port:COM148 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_ID: 0326
 CPU_SW: 0001
 CPU_HW: CB00
 uploading boot image to RAM...
 Handshake received from Phone.
 Getting connection agent status:preloader
 Send boot2 ...
 Receive SYNC signal, Boot2 runs normally.
 Getting RAM info ...
 SRAM: type[0x2] base_address[0x200000] size[0x40000]
 DRAM: type[0x1] base_address[0x40000000] size[0x80000000]
 Getting H/W info ...
 CHIP     : MT6755/6750
 CPU ID   : 
 EMMC ID  : 150100525831424D4207CBB39056832B
 EMMC Size: 32GB,  usable capacity: 29,13GB
 EMMC Name: eMMC_Samsung_RX1BMB
 
 Formatting ...
 FRP Partition found, erasing ...
 Format done
 
 Action completed
 Time taken : 00:00:06
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.58.2