vivo y69 android version nugat 7.0 patternlock solved test report - GSM-Forum

ernie78™ · 01-21-2018, 13:52

vivo y69
first

read info

Code:

 Action : Read Info
 Brand: VIVO
 Model: Y69
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 HID: USB\VID_0E8D&PID_0003&REV_0100
 FNM: MediaTek USB Port (COM5)
 Phone found [ USB Port:COM5 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0001
 CPU_HW: CB00
 CPU_ID: 0326[MT6755]
 BV: FE
 SecConf: 00000005
 uploading boot image to RAM...
 Handshake received from Phone.
 Getting connection agent status:brom
 Init DRAM...
 Waiting for DRAM detection...
 Selected: 1/3    ...OK
 Send boot2 ...
 Receive SYNC signal, Boot2 runs normally.
 Getting RAM info ...
 SRAM: type[0x2] base_address[0x] size[0x]
 DRAM: type[0x1] base_address[0x40000000] size[0x80000000]
 Getting H/W info ...
 CHIP     : MT6755/6750
 CPU ID   : 
 EMMC ID  : 90014A484247346132A5194B10D7A41D
 EMMC Size: 32GB,  usable capacity: 29.13GB
 EMMC Name: eMMC_Hynix_HBG4a2
 Boot Information completed.
 
 Reading Project Property ...
 
 Brand          : vivo
 Phone Model    : vivo 1714
 Android Ver    : 7.0
 CPU/Processor  : MT6755
 MTK Project ver: alps-mp-n0.mp7-V1.24_bbk6750.66.n_P155
 SW Version     : NRD90M release-keys
 
 Action completed
 Time taken : 00:00:28
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.37.2

readflash

Code:

 Action : Read Flash
 Brand: VIVO
 Model: Y69
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 HID: USB\VID_0E8D&PID_0003&REV_0100
 FNM: MediaTek USB Port (COM5)
 Phone found [ USB Port:COM5 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0001
 CPU_HW: CB00
 CPU_ID: 0326[MT6755]
 BV: FE
 SecConf: 00000005
 uploading boot image to RAM...
 Handshake received from Phone.
 Getting connection agent status:brom
 Init DRAM...
 Waiting for DRAM detection...
 Selected: 1/3    ...OK
 Send boot2 ...
 Receive SYNC signal, Boot2 runs normally.
 Getting RAM info ...
 SRAM: type[0x2] base_address[0x] size[0x]
 DRAM: type[0x1] base_address[0x40000000] size[0x80000000]
 Getting H/W info ...
 CHIP     : MT6755/6750
 CPU ID   : 
 EMMC ID  : 90014A484247346132A5194B10D7A41D
 EMMC Size: 32GB,  usable capacity: 29.13GB
 EMMC Name: eMMC_Hynix_HBG4a2
 
 USB STATUS: full-speed
 
 usb switching to high speed ...
 New Port: COM17   ......ok
 
 Reading Project Property ...
 done.
 Making dir: C:\Users\ernie\Desktop\\MT6755_vivo 1714_Android7.0_NRD90M release-keys_20180121_183812\...[ok]
 Reading preloader ......ok
 Reading recovery ......ok
 Reading cust ......ok
 Reading md1img ......ok
 Reading md1dsp ......ok
 Reading md1arm7 ......ok
 Reading md3img ......ok
 Reading nvram ......ok
 Reading lk ......ok
 Reading lk2 ......ok
 Reading boot ......ok
 Reading logo ......ok
 Reading tee1 ......ok
 Reading tee2 ......ok
 Reading secro ......ok
 Reading system ......ok
 Reading cache ......ok
 Reading userdata ......ok
 All done.
 Files saved to: C:\Users\ernie\Desktop\\MT6755_vivo 1714_Android7.0_NRD90M release-keys_20180121_183812\
 
 Action completed
 Time taken : 00:04:09
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.37.2

Code:

Action : Reset all to default
 Brand: VIVO
 Model: Y69
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb...
 HID: USB\VID_0E8D&PID_0003&REV_0100
 FNM: MediaTek USB Port (COM5)
 Phone found [ USB Port:COM5 ]
 Connecting...
 Connection Done.
 Read CPU Info...
 CPU_SW: 0001
 CPU_HW: CB00
 CPU_ID: 0326[MT6755]
 BV: FE
 SecConf: 00000005
 uploading boot image to RAM...
 Handshake received from Phone.
 Getting connection agent status:brom
 Init DRAM...
 Waiting for DRAM detection...
 Selected: 1/3    ...OK
 Send boot2 ...
 Receive SYNC signal, Boot2 runs normally.
 Getting RAM info ...
 SRAM: type[0x2] base_address[0x] size[0x]
 DRAM: type[0x1] base_address[0x40000000] size[0x80000000]
 Getting H/W info ...
 CHIP     : MT6755/6750
 CPU ID   : 
 EMMC ID  : 90014A484247346132A5194B10D7A41D
 EMMC Size: 32GB,  usable capacity: 29.13GB
 EMMC Name: eMMC_Hynix_HBG4a2
 
 Formatting ...
 FRP Partition found, erasing ...
 Format done
 
 Action completed
 Time taken : 00:00:13
 Reconnect Battery/USB Cable
 CS-Tool Ver 1.37.2

result

big thanks CStool team..
for beta

br: ernie78