[06-01-24] UMTv2/UMTPro UltimateSams v0.7 - Samsung USA FRP in MTP Mode...

[U.M.T]

We are pleased to announce
UMTv2 / UMT Pro
Innovative and Intelligent



UltimateSams v0.7
The Ultimate Samsung Tool




Supported Functions
- Flash Single / 4 File Firmware
- Fully Customizable Flashing
- Scenario Based Flashing
- Advance Flasher to Flash partition with files of your choice
- Option to skip reboot, if for example, you are flashing custom recovery
- ENG Root option to root supported models with Factory Binary
- FRP Reset without Data Loss (for supported models)
- FRP Reset (UD Format) for most Samsung Phones
- FRP Reset in ADB Mode, it will auto select method if phone has ENG Root
- Remove MDM Lock (Need Root Access / ENG Root)
- Remove Call Me (Need Root Access / ENG Root) - No Relock Method
- Remove Android Locks (Need Root Access / ENG Root)
- Userlock ByPass without Data Loss with Special Firmware
- FRP Lock ByPass with Special Firmware
- Firmware Tool to Create Special Firmware for FRP / Userlock ByPass
- Make Rooted Boot to Root Samsung Devices
- FRP Bypass over MTP/Modem Port
- FRP Reset in Download (Odin) Mode
- Samsung 2024 USA Variants FRP Reset in MTP Mode - NEW!
- Samsung CSC Change in MTP Mode - NEW!


Note : Some features are device/brand specific, may not work on all devices.








Whats New:


Added FRP Reset in MTP Mode for:
- Samsung Galaxy A03s (SM-A037U)
- Samsung Galaxy A13 (SM-A135U)
- Samsung Galaxy A14 5G (SM-A146U)
- Samsung Galaxy A50 (SM-A505U)
- Samsung Galaxy A51 (SM-A515U)
- Samsung Galaxy S21 Ultra 5G (SM-G998U)
- Samsung Galaxy S21+ Plus (SM-G996U)
- Samsung Galaxy S21 5G (SM-G991U)
- Samsung Galaxy S21 FE 5G (SM-G990U)
- Samsung Galaxy S20+ 5G (SM-G986U)
- Samsung Galaxy S20 Ultra 5G (SM-G988U)
- Samsung Galaxy S22 Ultra 5G (SM-S908U)
- Samsung Galaxy S22 5G (SM-S901U)
- Samsung Galaxy S23 (SM-S911U)
- Samsung Galaxy S23+ (SM-S916U)
- Samsung Galaxy S23 Ultra (SM-S918U)
- Samsung Galaxy Note 20 Ultra 5G (SM-N986U)
- Samsung Galaxy Note20 5G (SM-N981U)
- Samsung Galaxy Z Fold 3 (SM-F926U)
- Samsung Galaxy Z Fold 4 (SM-F936U)
- Samsung Galaxy Z Fold5 (SM-F946U)
- Samsung Galaxy Z Flip 3 5G (SM-F711U)
- Samsung Galaxy Z Flip 4 (SM-F721U)
- Samsung Galaxy Z Flip5 (SM-F731U)
- This method is specifically for US Devices.


Added CSC Change in MTP Mode
- This may work on other devices also apart from US version.







Please use UMT Card Manager to Update Card Counter / Firmware / Activate Add-on, available via Support Access.





It Has Begun...
Keep Following Us...
Some Nice Updates Are On The Way...


SPECIAL THANKS TO OUR VALUABLE USERS FOR THEIR LOVE AND SUPPORT FOR MORE THAN 8 YEARS




WARNING :
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.


ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.



STATUTORY WARNING - READ CAREFULLY
Using International Edition of our software is prohibited by Indian Law.
We strictly advice you to use Indian Edition if you are in India.
If you use International Edition in India, it may cause legal action against you by local law enforcement agencies.
We will not be liable for any loss or damaged caused.



:: NO FAKE ADVERTISEMENT ::
:: NO FAKE UPDATES ::
:: NO FAKE WORLD'S FIRST ::
:: NO FAKE BLA BLA BLA ::



How to Download:
- Download UMT Support Access.
- Connect UMT Box/Dongle to PC and Run UMT Support Access.
- Download required Executable from Installer folder.
- Enjoy!
- Download Mirrors



PLEASE DO NOT POST OFF TOPIC HERE. ONLY POST REGARDING THIS UPDATE AND SUPPORTED MODELS. ANY OFF TOPIC POST WILL BE DELETED

[Iftakhar Rajper]

Good efforts nice work keep it up..

[Malik Shani G]

Nice

Samsung 2024 USA Variants FRP Reset in MTP Mode - NEW!

[faisal jee]

Model : Samsung
Operation : FRP Bypass [2023 New Method]
Searching for Phone...Found
Hw ID : USB\VID_04E8&PID_6860&REV_0<00&Modem
Port: : COM21 : SAMSUNG Mobile USB Modem #83
Checking for Device...Found [Normal Mode]
Reading Phone Information...OK
Model: : SM-N975U
IMEI: : 3561xxxxxxxxx907
Software: : N975USQU7HWE1/N975UOYN7HWE1/N975USQU7HWE1/N975USQU7HWE1
Product : XAA
Enabling ADB (2023 New Method)...OK
Searching for Device...Found
Brand : samsung
Model : SM-N975U
Product : qssi
Device : d2q
Andriod Ver. : 12
Patch Level : 2023-05-01
PDA : N975USQU7HWE1
Bootloader : N975USQU7HWE1
Build ID : SP1A.210812.016.N975USQU7HWE1
Build Date : Thu May 4 08:44:54 KST 2023
Checking Root Status...Done
Root : No Root
Resetting FRP Lock...Done
HINT : This method work for QC/Exynos model with Security Patch < June 2023
Elapsed Time 27:51
[UltimateSams v0.7]
Saved to Logs\240106_172751.log

[ikloveto]

cant unlock bootloader s911b


Device : Samsung Galaxy S23 5G (SM-S911B) U3
Operation : Bootloader Unlock/Relock
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM79)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...Done
Protocol v3 or higher detected. Auto Loader unsupported.
Initializing Protocol...OK
Using Pre-Defined Loader [SMS911B_U3.ufl]
Preparing Loader...Done
Sending Loader [SMS911B_U3]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : , UFS, 256 GB
LU Count : 6 [0x03B64000] [0x00001400] [0x00001400] [0x00002000] [0x00028000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK [Sign]
Build : S911BXXU3BWJM
Int. Build : SM-S911B_EUR_XX_QKEY1
Reading Data...Done
Bootloader : Locked
Preparing Data...Done
Writing Data...Done
Operation Finished.
QcFire Ver. 9.2

[riuku]

"Userlock ByPass without Data Loss with Special Firmware" What does which firmware mean?

[Fast Unlocking]

Originally Posted by ikloveto

cant unlock bootloader s911b


Device : Samsung Galaxy S23 5G (SM-S911B) U3
Operation : Bootloader Unlock/Relock
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM79)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...Done
Protocol v3 or higher detected. Auto Loader unsupported.
Initializing Protocol...OK
Using Pre-Defined Loader [SMS911B_U3.ufl]
Preparing Loader...Done
Sending Loader [SMS911B_U3]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : , UFS, 256 GB
LU Count : 6 [0x03B64000] [0x00001400] [0x00001400] [0x00002000] [0x00028000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK [Sign]
Build : S911BXXU3BWJM
Int. Build : SM-S911B_EUR_XX_QKEY1
Reading Data...Done
Bootloader : Locked
Preparing Data...Done
Writing Data...Done
Operation Finished.
QcFire Ver. 9.2

only frp supported if you read update thread, u ll know this

[Fast Unlocking]

Originally Posted by riuku

"Userlock ByPass without Data Loss with Special Firmware" What does which firmware mean?

this is generic support list for various models in Samsung module, people read one part and understand how they want...

Supported Functions
- Flash Single / 4 File Firmware
- Fully Customizable Flashing
- Scenario Based Flashing
- Advance Flasher to Flash partition with files of your choice
- Option to skip reboot, if for example, you are flashing custom recovery
- ENG Root option to root supported models with Factory Binary
- FRP Reset without Data Loss (for supported models)
- FRP Reset (UD Format) for most Samsung Phones
- FRP Reset in ADB Mode, it will auto select method if phone has ENG Root
- Remove MDM Lock (Need Root Access / ENG Root)
- Remove Call Me (Need Root Access / ENG Root) - No Relock Method
- Remove Android Locks (Need Root Access / ENG Root)
- Userlock ByPass without Data Loss with Special Firmware
- FRP Lock ByPass with Special Firmware
- Firmware Tool to Create Special Firmware for FRP / Userlock ByPass
- Make Rooted Boot to Root Samsung Devices
- FRP Bypass over MTP/Modem Port
- FRP Reset in Download (Odin) Mode
- Samsung 2024 USA Variants FRP Reset in MTP Mode - NEW!
- Samsung CSC Change in MTP Mode - NEW!



Now this models in this update thread support in update thread we already said FRP support via MTP for usa models nothing else

now as per your post can you tell us for which model you are asking?

[riuku]

samsung a226b
samsung g991f
samsung a705fn
samsung g986b
That's all for now.

[ikloveto]

by mistak i use lost mode button in s23 kg lock phone after all process done phone rebooting in download mode. now how to recover ? when i flash this phone give error finace lock




https://ibb.co/T2fjycJ

[Fast Unlocking]

Originally Posted by riuku

samsung a226b
samsung g991f
samsung a705fn
samsung g986b
That's all for now.

Then sure you don’t read properly our update posts to know when we release what feature is supported per model released

[Fast Unlocking]

Originally Posted by ikloveto

by mistak i use lost mode button in s23 kg lock phone after all process done phone rebooting in download mode. now how to recover ? when i flash this phone give error finace lock




https://ibb.co/T2fjycJ

Usually after lost mode on supported phones you must flash phone in Odin mode

[ikloveto]

Originally Posted by Fast Unlocking

Usually after lost mode on supported phones you must flash phone in Odin mode

you are right but sir now no option to write firmware becose of kg lock inside now any option plz tell me

[U.M.T]

Originally Posted by ikloveto

you are right but sir now no option to write firmware becose of kg lock inside now any option plz tell me

Contact me on Skype.

Br,
UMT

[ikloveto]

Originally Posted by U.M.T

Contact me on Skype.

Br,
UMT

already msg you sir plz check in box