[17-12-23] UMTv2/UMTPro QcFire v9.1 - Samsung A23 and Bugfixes

[U.M.T]

We are pleased to announce
UMTv2 / UMT Pro
Innovative and Intelligent


QcFire v9.1
The Ultimate Qualcomm Tool



Supported Functions
- Read / Write Firmware
- Backup / Restore QCN
- IMEI Repair in FTM/Diag + Flash Mode
- Backup / Reset / Restore Security (EFS)
- Reset FRP (Google Factory Reset Protection)
- Format UserData
- Read Pattern Lock (Android < 6.0, Un-Encrypted Devices Only)
- Reset Locks (PIN, Password, Pattern w/o Data Loss, Un-Encrypted Devices Only)
- Enable Diag (Need OEM Unlock, May not work on BL Locked Devices)
- Reboot to EDL from Fastboot
- Reset Mi Account for Xiaomi Devices
- Disable Mi Account for Xiaomi Devices
- Factory Reset (sideload Mode) for Xiaomi Devices
- Disable / Restore Locks for Encrypted Userdata
- Motorola Boot Repair
- Xiaomi EDL Locked Device Service
- Bootloader Unlock in EDL Mode for some Xiaomi Devices
- One Click Root in EDL Mode for Generic Qualcomm Devices
- Forensic Functions (Read Contacts / Messages in EDL Mode)
- One Click Lock Reset for Vivo Phones (Encrypted Userdata)
- Factory Method for Format FS
- EDL Authentication using Xiaomi Auth App (Service Account Required)
- Xiaomi Wipe EFS in Sideload Mode
- Xiaomi IMEI Repair for RSA Protected Phones
- Xiaomi Boot Loader Unlock
- Unique Method for Vivo Reset Locks for Protected Devices
- Xiaomi EDL Auth Using UMT Server
- Xiaomi Flashing in Fastboot Mode
- Nokia Factory Firmware (nb0) Direct Flashing in EDL mode
- Oppo OFP Firmware Exctration Added
- Xiaomi Free Auth Service (bypass).
- Mi Account Reset without Relock
- Mi Account Patch on Flashing (EDL/Fastboot)
- Samsung MDM Unlock in EDL Mode
- Huawei ID Reset
- Vivo Functions in Fastboot Mode
- Universal Huawei ID Reset
- Xiaomi Sideload Reset FRP/Mi Account
- Xiaomi Sideload Firmware Update
- Xiaomi Temporary BL Unlock
- Xiaomi Enable Diag (NO ROOT)
- Samsung Lost Mode Reset in EDL Mode - NEW!!!




Added:

ASUS
- Zenfone 4 Pro (ZS551KL)

Huawei
- P50 Pro (JAD-LX9) - Auto Loader
- Watch 5 Active (KTY-L10)

Oppo
- Reno6 Pro 5G (CPH2247)

Samsung
- Galaxy A23 (SM-A235F)
- Galaxy S20 Ultra 5G (SM-G988U) - Auto Loader
- Galaxy S21 FE (SM-G990U) - Auto Loader
- Galaxy Tab A1 (2020) (SM-T505)
- Galaxy Z Fold3 5G (SM-F928B) - Auto Loader

Sunmi
- T1


Updated Firehose Protocol to Support V3
- Unfortunately Auto Loader will not work if protocol version is 3
- It also fixes Handshake Error on S22/S23 Ultra etc.


Added Write (Patch) Method in Advance Flasher
- It is usefull if you caused some damage by erase small partitions on protected device.
- Write using this method is too slow, but still better than nothing.


Added Alternate Method to Read Firmware Information for Samsung New Devices


Improved Booting Sequence
- Fixed hanging for a few seconds on storage detection
- Fixed loader write error on some loaders like S23 Ultra etc.


Updated Internal Loader Database



Improtant Note:
- Lost Mode Reset is only for devices which are in lost mode by Samsung Account and not KG locked.
- If you do it on KG Locked device, chances are that Flashing in Odin Mode will be blocked by bootloader.
- In case of such issue, create a thread with firmware information of your device and logs.



CONNECTION METHOD:
Method to connect some Samsung Devices is already in Log.
For newer devices, do the following:
- Hold VOL UP + DOWN on Device.
- Hold Button on EDL Cable.
- Insert Cable to Device while holding EDL Cable Button.
- Now rapidly click both VOL UP + DOWN at the same time.
- Once you have clicked VOL UP + DOWN more than 3 times, leave EDL Cable Button but keep rapidly clicking VOL UP + DOWN.
- Stop clicking VOLUME Buttons once device is connected in EDL Mode.






Special thanks to all our users who helped us with their test reports.



Please use UMT Card Manager to Update Card Counter / Firmware / Activate Add-on, available via Support Access.



It Has Begun...
Keep Following Us...
Some Nice Updates Are On The Way...


SPECIAL THANKS TO OUR VALUABLE USERS FOR THEIR LOVE AND SUPPORT FOR MORE THAN 8 YEARS



WARNING :
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.


ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.

STATUTORY WARNING - READ CAREFULLY
Using International Edition of our software is prohibited by Indian Law.
We strictly advice you to use Indian Edition if you are in India.
If you use International Edition in India, it may cause legal action against you by local law enforcement agencies.
We will not be liable for any loss or damaged caused.



How to Download:
- Download UMT Support Access.
- Connect UMT Box/Dongle to PC and Run UMT Support Access.
- Download required Executable from Installer folder.
- Enjoy!
- Download Mirrors



PLEASE DO NOT POST OFF TOPIC HERE. ONLY POST REGARDING THIS UPDATE AND SUPPORTED MODELS. ANY OFF TOPIC POST WILL BE DELETED

[jhon32272]

WORKS 100% THANKS


Device : Samsung Galaxy S22 5G (SM-S901E) U7
Operation : Samsung Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM13)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...
01000000300000000300000001000000000400000000000000 0000000000000000000000000000000000000000000000OK
Init Handshake Sequence...Done
Protocol v3 or higher detected. Auto Loader unsupported.
Initializing Protocol...OK
Using Pre-Defined Loader [SMS901E_U7.ufl]
Preparing Loader...Done
Sending Loader [SMS901E_U7]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : , UFS, 256 GB
LU Count : 6 [0x03B6B400] [0x00000800] [0x00000800] [0x00000400] [0x00028000] [0x00001000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK [Sign]
Build : S901EXXU7CWH5
Int. Build : SM-S901E_SEA_DX_QKEY2
Reset FRP... Done
Operation Finished.
QcFire Ver. 9.1

[phonhimo]

Originally Posted by jhon32272

WORKS 100% THANKS


Device : Samsung Galaxy S22 5G (SM-S901E) U7
Operation : Samsung Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM13)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...
01000000300000000300000001000000000400000000000000 0000000000000000000000000000000000000000000000OK
Init Handshake Sequence...Done
Protocol v3 or higher detected. Auto Loader unsupported.
Initializing Protocol...OK
Using Pre-Defined Loader [SMS901E_U7.ufl]
Preparing Loader...Done
Sending Loader [SMS901E_U7]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : , UFS, 256 GB
LU Count : 6 [0x03B6B400] [0x00000800] [0x00000800] [0x00000400] [0x00028000] [0x00001000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK [Sign]
Build : S901EXXU7CWH5
Int. Build : SM-S901E_SEA_DX_QKEY2
Reset FRP... Done
Operation Finished.
QcFire Ver. 9.1

method connecter ؟؟؟؟؟؟؟

[U.M.T]

Update Post has been updated with connection method.

Br,
UMT

[jhon32272]

Originally Posted by phonhimo

method connecter ؟؟؟؟؟؟؟

Edl cable , power off the phone , press and hold vol + ando vol - and connect edl cable with buttom , and release volumens buttom and finish release edl cable buttlm

[Deni's]

Originally Posted by jhon32272

Edl cable , power off the phone , press and hold vol + ando vol - and connect edl cable with buttom , and release volumens buttom and finish release edl cable buttlm

what edl cable do you use?would you mind uploading ur EDL cable here....

[blushis]

Great Work Team Keep It Up

[U.M.T]

Originally Posted by Deni's

what edl cable do you use?would you mind uploading ur EDL cable here....

Normal EDL Cable will work. Just use Micro to C converter.

Br,
UMT

[dedeyk]

anyone have tes poco x3 pro ubL temporary with sideload mode?

[hat07]

Operation : Samsung Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM184)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...Failed
Handshake Sequence Error Ignored!
Initializing Protocol...Failed
Operation Finished.
QcFire Ver. 9.1

[Malik Shani G]

Nice


Added:



ASUS
- Zenfone 4 Pro (ZS551KL)

Huawei
- P50 Pro (JAD-LX9) - Auto Loader
- Watch 5 Active (KTY-L10)

Oppo
- Reno6 Pro 5G (CPH2247)

Samsung
- Galaxy A23 (SM-A235F)
- Galaxy S20 Ultra 5G (SM-G988U) - Auto Loader
- Galaxy S21 FE (SM-G990U) - Auto Loader
- Galaxy Tab A1 (2020) (SM-T505)
- Galaxy Z Fold3 5G (SM-F928B) - Auto Loader

Sunmi
- T1

[hat07]

Originally Posted by hat07

Operation : Samsung Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM184)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...Failed
Handshake Sequence Error Ignored!
Initializing Protocol...Failed
Operation Finished.
QcFire Ver. 9.1

i used normal frp reset not from samsung special and done !


Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM186)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM186)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...Done
Protocol v3 or higher detected. Auto Loader unsupported.
Initializing Protocol...OK
Preparing Loader...Done
Sending Loader [SMF936B_BIT4]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : , UFS, 256 GB
LU Count : 6 [0x03B6B400] [0x00000800] [0x00000800] [0x00000400] [0x00028000] [0x00001000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK [Sign]
Build : F936BXXU4DWH5
Int. Build : SM-F936B_EUR_XX_QKEY2
Resetting FRP Lock...Failed
Using Patch Method... Done Done
Operation Finished.
QcFire Ver. 9.1

[Malik Shani G]

Nice


Added:



ASUS
- Zenfone 4 Pro (ZS551KL)

Huawei
- P50 Pro (JAD-LX9) - Auto Loader
- Watch 5 Active (KTY-L10)

Oppo
- Reno6 Pro 5G (CPH2247)

Samsung
- Galaxy A23 (SM-A235F)
- Galaxy S20 Ultra 5G (SM-G988U) - Auto Loader
- Galaxy S21 FE (SM-G990U) - Auto Loader
- Galaxy Tab A1 (2020) (SM-T505)
- Galaxy Z Fold3 5G (SM-F928B) - Auto Loader

Sunmi
- T1

[vip85]

Device : Samsung Galaxy S23 Ultra 5G (SM-S918B) U3
Operation : Samsung Lost Mode Reset
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...Done
Protocol v3 or higher detected. Auto Loader unsupported.
Initializing Protocol...OK
Using Pre-Defined Loader [SMS918B_U3.ufl]
Preparing Loader...Done
Sending Loader [SMS918B_U3]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : , UFS, 256 GB
LU Count : 6 [0x03B64000] [0x00001400] [0x00001400] [0x00002000] [0x00028000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK [Sign]
Build : S918BXXU3BWJM
Int. Build : SM-S918B_EUR_XX_QKEY1
Resetting Lost Mode... Done Done Done
Once phone reboot in Odin Mode, full flash your device.
If stuck on Charging Logo, hold VOL DOWN + PWR for 5 Seconds.
Operation Finished.
QcFire Ver. 9.1

after cant flash in odin

custom binary blocked due to remaining installment balance

https://freeimage.host/i/JutUpvj

[imadzid]

Device : Samsung Galaxy S23 5G (SM-S911B) U3
Operation : Samsung Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM52)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...Done
Protocol v3 or higher detected. Auto Loader unsupported.
Initializing Protocol...OK
Using Pre-Defined Loader [SMS911B_U3.ufl]
Preparing Loader...Done
Sending Loader [SMS911B_U3]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : , UFS, 128 GB
LU Count : 6 [0x01D99000] [0x00001400] [0x00001400] [0x00002000] [0x00028000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK [Sign]
Build : S911BXXU3AWGJ
Int. Build : SM-S911B_EUR_XX_QKEY1
Reset FRP... Done
Operation Finished.
QcFire Ver. 9.1