Flash File] ZTE MAX Blue LTE Z986DL - GSM-Forum

emmaugoh · 02-13-2019, 19:19

I need flash file for this phone. Phone stuck in dfu

emmaugoh · 02-14-2019, 01:09

uhecking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000400
OPK_DATA : 200C79AADAA228230C02A374AE765C0ABFA99670D0A34B8E62 9CEF875C0AFD75
Initializing Protocol...OK
Using Auto Loader Selection [3]
Device may possibly not boot with this loader.
Preparing Loader...Done
Sending Loader [8953_005]...Write Error!
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 3.7

emmaugoh · 02-14-2019, 11:21

Got a working z986dl and nck was able to read firmware but can't read firmware with one that went to dfu.. was able to put it to edl mode but still show loader error on nck and qcfire

emmaugoh · 02-17-2019, 19:07

Quote:

Originally Posted by emmaugoh

got a working z986dl and nck was able to read firmware but can't read firmware with one that went to dfu.. Was able to put it to edl mode but still show loader error on nck and qcfire

zte_mmb29m_z986dl_6_0_1

emmaugoh · 02-18-2019, 02:00

got the firmware loaded but still error

Operation : Multi Flash
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM39)
Driver Info : HS Corporation, ghsser.sys, 10.2104.1.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000400
OPK_DATA : 200C79AADAA228230C02A374AE765C0ABFA99670D0A34B8E62 9CEF875C0AFD75
Initializing Protocol...OK
Using Auto Loader Selection [3]
Device may possibly not boot with this loader.
Preparing Loader...Done
Sending Loader [8953_005]...Write Error!
Please use correct loader and check USB port / cable.
Operation Failed.
QcFire Ver. 3.7

**U.M.T** · 02-18-2019, 17:32

You are still using Internal loader. You need to select loader from fw.

Post screenshot for better understanding.

Br,
UMT

emmaugoh · 02-20-2019, 00:27

Quote:

Originally Posted by U.M.T

You are still using Internal loader. You need to select loader from fw.

Post screenshot for better understanding.

Br,
UMT

the firmware was backed up by nck... how do i locate the loader

02-13-2019, 19:19	#1 (permalink)
emmaugoh Freak Poster Join Date: Jun 2016 Posts: 244 Member: 2592600 Status: Offline Thanks Meter: 19	Flash File] ZTE MAX Blue LTE Z986DL I need flash file for this phone. Phone stuck in dfu

02-14-2019, 01:09	#2 (permalink)
emmaugoh Freak Poster Join Date: Jun 2016 Posts: 244 Member: 2592600 Status: Offline Thanks Meter: 19	uhecking for existing devices...Found Port : Qualcomm HS-USB QDLoader 9008 (COM3) Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0 Opening Port...OK Init Handshake Sequence...OK Hardware ID : E1600400 [8953] 00000400 OPK_DATA : 200C79AADAA228230C02A374AE765C0ABFA99670D0A34B8E62 9CEF875C0AFD75 Initializing Protocol...OK Using Auto Loader Selection [3] Device may possibly not boot with this loader. Preparing Loader...Done Sending Loader [8953_005]...Write Error! Please use correct loader and check USB port / cable. Operation Finished. QcFire Ver. 3.7

02-14-2019, 11:21	#3 (permalink)
emmaugoh Freak Poster Join Date: Jun 2016 Posts: 244 Member: 2592600 Status: Offline Thanks Meter: 19	Got a working z986dl and nck was able to read firmware but can't read firmware with one that went to dfu.. was able to put it to edl mode but still show loader error on nck and qcfire

02-18-2019, 02:00	#5 (permalink)
emmaugoh Freak Poster Join Date: Jun 2016 Posts: 244 Member: 2592600 Status: Offline Thanks Meter: 19	got the firmware loaded but still error Operation : Multi Flash Checking for existing devices...Not Found Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable. Some phones may need Special Boot Cable or TestPoint for EDL mode. Found Port : Qualcomm HS-USB QDLoader 9008 (COM39) Driver Info : HS Corporation, ghsser.sys, 10.2104.1.2 Connecting to phone...OK Waiting for response...OK Init Handshake Sequence...OK Hardware ID : E1600400 [8953] 00000400 OPK_DATA : 200C79AADAA228230C02A374AE765C0ABFA99670D0A34B8E62 9CEF875C0AFD75 Initializing Protocol...OK Using Auto Loader Selection [3] Device may possibly not boot with this loader. Preparing Loader...Done Sending Loader [8953_005]...Write Error! Please use correct loader and check USB port / cable. Operation Failed. QcFire Ver. 3.7

02-18-2019, 17:32	#6 (permalink)
U.M.T Product Manager Join Date: Sep 2015 Location: Inside UMT Posts: 9,406 Member: 2465108 Status: Offline Sonork: No More Used Thanks Meter: 13,432	You are still using Internal loader. You need to select loader from fw. Post screenshot for better understanding. Br, UMT