Moto xt 1058 after unlock imei become 0 - GSM-Forum

Gsm Mardan · 08-02-2016, 12:06

Moto xt 1058 after unlock imei become 0

and try with repair mathed but failed

Port : COM137 : Motorola QC Diag Port (COM137)
Baud Rate : 921600
Device : Motorola QCOM
Operation : Repair IMEI
Opening Port... OK
Reading Phone Information... OK
Compile : May 28 2015 14:44:11
Release : May 21 2015 05:00:00
Hw Ver. : AAAAATCZ
Build : M8960A-AAAATCZM-6.1.03082
IMEI [1] : 000000000000000
Checking Basedband for Compatibility... Done
Repairing IMEI [358788978978797]... Done
Verifying New IMEI... Failed
Please restart device and check IMEI.
Operation Failed.
Elapsed Time: 00:03
[Module Ver. 2.8]

rachittelecom · 08-02-2016, 12:25

Quote:

Originally Posted by Gsm Mardan

Moto xt 1058 after unlock imei become 0

and try with repair mathed but failed

Port : COM137 : Motorola QC Diag Port (COM137)
Baud Rate : 921600
Device : Motorola QCOM
Operation : Repair IMEI
Opening Port... OK
Reading Phone Information... OK
Compile : May 28 2015 14:44:11
Release : May 21 2015 05:00:00
Hw Ver. : AAAAATCZ
Build : M8960A-AAAATCZM-6.1.03082
IMEI [1] : 000000000000000
Checking Basedband for Compatibility... Done
Repairing IMEI [358788978978797]... Done
Verifying New IMEI... Failed
Please restart device and check IMEI.
Operation Failed.
Elapsed Time: 00:03
[Module Ver. 2.8]

Hello.....
plz dont post incomplete logs...As u say,imei become 0 after unlocking, then where is unlocking logs? did u chk imei befrore unlocking with umt tool ?
br
rachittelecom

Gsm Mardan · 08-02-2016, 13:46

Quote:

Originally Posted by rachittelecom

Hello.....
plz dont post incomplete logs...As u say,imei become 0 after unlocking, then where is unlocking logs? did u chk imei befrore unlocking with umt tool ?
br
rachittelecom

Port : COM134 : Motorola QC Diag Port (COM134)
Baud Rate : 921600
Device : Motorola QCOM
Operation : Unlock
Opening Port... OK
Reading Phone Information... OK
Compile : May 28 2015 14:44:11
Release : May 21 2015 05:00:00
Hw Ver. : AAAAATCZ
Build : M8960A-AAAATCZM-6.1.03082
IMEI [1] : 354982052780520
Checking Baseband for Compatibility... Done
Unlocking Device... Done
Verifying Unlock... OK
Rebooting Device... Failed
Please restart phone before doing anything.
Operation Finished.
Elapsed Time: 00:04
[Module Ver. 2.8]

rachittelecom · 08-02-2016, 14:07

Quote:

Originally Posted by gsm mardan

port : Com134 : Motorola qc diag port (com134)
baud rate : 921600
device : Motorola qcom
operation : Unlock
opening port... Ok
reading phone information... Ok
compile : May 28 2015 14:44:11
release : May 21 2015 05:00:00
hw ver. : Aaaaatcz
build : M8960a-aaaatczm-6.1.03082
imei [1] : 354982052780520
checking baseband for compatibility... Done
unlocking device... Done
verifying unlock... Ok
rebooting device... Failed
please restart phone before doing anything.
Operation finished.
Elapsed time: 00:04
[module ver. 2.8]

plz try repair with original imei...

Repairing IMEI [358788978978797]... Done

**U.M.T** · 08-02-2016, 15:04

@Gsm Mardan

Don't you think same phone, same baseband and all but you say it became zero. Strange.

http://forum.gsmhosting.com/vbb/f970...t-box-2103978/

Restart phone and check again amd also follow rachit's suggestions.

Br,
Ultimate Multi Tool

Gsm Mardan · 08-02-2016, 16:58

Quote:

Originally Posted by U.M.T

@Gsm Mardan

Don't you think same phone, same baseband and all but you say it became zero. Strange.

http://forum.gsmhosting.com/vbb/f970...t-box-2103978/

Restart phone and check again amd also follow rachit's suggestions.

Br,
Ultimate Multi Tool

i have 50+ phone two phones i demage with this mathed
i try to repair orignal imei but same still imie is zero

**U.M.T** · 08-02-2016, 18:30

There is NO WAY THAT THIS METHOD WILL DAMAGE YOUR PHONE.

You must have used some other tools or tried some other method. Even repairing IMEI on working phone will never damage it.
Try full flash with same version firmware.

Br,
Ultimate Multi Tool

Gsm Mardan · 08-03-2016, 07:59

Quote:

Originally Posted by U.M.T

There is NO WAY THAT THIS METHOD WILL DAMAGE YOUR PHONE.

You must have used some other tools or tried some other method. Even repairing IMEI on working phone will never damage it.
Try full flash with same version firmware.

Br,
Ultimate Multi Tool

i have other phone in hand come on team viwer and check by self then u got

**U.M.T** · 08-03-2016, 19:23

Quote:

Try full flash with same version firmware.

Br,
Ultimate Multi Tool

08-02-2016, 12:06	#1 (permalink)
Gsm Mardan No Life Poster Join Date: Nov 2008 Location: Mardan Posts: 1,350 Member: 897494 Status: Offline Sonork: 100.1581481 Thanks Meter: 1,102	Moto xt 1058 after unlock imei become 0 Moto xt 1058 after unlock imei become 0 and try with repair mathed but failed Port : COM137 : Motorola QC Diag Port (COM137) Baud Rate : 921600 Device : Motorola QCOM Operation : Repair IMEI Opening Port... OK Reading Phone Information... OK Compile : May 28 2015 14:44:11 Release : May 21 2015 05:00:00 Hw Ver. : AAAAATCZ Build : M8960A-AAAATCZM-6.1.03082 IMEI [1] : 000000000000000 Checking Basedband for Compatibility... Done Repairing IMEI [358788978978797]... Done Verifying New IMEI... Failed Please restart device and check IMEI. Operation Failed. Elapsed Time: 00:03 [Module Ver. 2.8]

08-02-2016, 18:30	#7 (permalink)
U.M.T Product Manager Join Date: Sep 2015 Location: Inside UMT Posts: 9,405 Member: 2465108 Status: Offline Sonork: No More Used Thanks Meter: 13,432	There is NO WAY THAT THIS METHOD WILL DAMAGE YOUR PHONE. You must have used some other tools or tried some other method. Even repairing IMEI on working phone will never damage it. Try full flash with same version firmware. Br, Ultimate Multi Tool Last edited by U.M.T; 08-02-2016 at 18:47.

08-02-2016, 15:04	#5 (permalink)
U.M.T Product Manager Join Date: Sep 2015 Location: Inside UMT Posts: 9,405 Member: 2465108 Status: Offline Sonork: No More Used Thanks Meter: 13,432	@Gsm Mardan Don't you think same phone, same baseband and all but you say it became zero. Strange. http://forum.gsmhosting.com/vbb/f970...t-box-2103978/ Restart phone and check again amd also follow rachit's suggestions. Br, Ultimate Multi Tool