motorola xt1022 dead after flash - GSM-Forum

coderinside · 01-20-2018, 10:02

now dead only 9008 port create

Code:

Port    : Fastboot Interface
Baud Rate    : Not Applicable
Device    : Motorola QC
Operation    : Flash
Fw Model    : condor_retaildsds
Fw Version    : condor_retaildsds-user 5.1 LPCS23.13-34.8-3 3 release-keysMSM8610BP_18033.4614.45.00R
Searching for Device in FastBoot Mode... OK
Reading Phone Information...
Model    : XT1022
Boot Ver.    : 5009
Baseband    : Not Found
Software    : Blur_Version.21.12.40.condor_retaildsds.retaildsdsall.en.03
IMEI    : 35xxxxxxxxxxxxxxx
CPU    : MSM8210 CS
RAM    : 1024MB Hynix S4 SDRAM DIE=4Gb
EMMC    : 4GB Hynix REV=06 PRV=05 TYPE=17
Sending Data [partition]... Done
Sending Data [motoboot]... Done
Sending Data [logo]... Done
Sending Data [boot]... Done
Sending Data [recovery]... Done
Sending Data [system]... Done
Sending Data [system]... Done
Sending Data [system]... Done
Sending Data [system]... Done
Sending Data [modem]... Done
Erasing [modemst1]... Done
Erasing [modemst2]... Done
Sending Data [fsg]... Done
Erasing [cache]... Done
Erasing [userdata]... Done
Operation Finished.
Elapsed Time: 02:48
[Module Ver. 4.4]
Log Saved to Logs\180120_142739.log

**U.M.T** · 01-20-2018, 10:03

Almost impossible!

Try reset power by holding Pwr button for a long time.

Br,
Ultimate Multi Tool

coderinside · 01-22-2018, 13:52

Quote:

Originally Posted by U.M.T

Almost impossible!

Try reset power by holding Pwr button for a long time.

Br,
Ultimate Multi Tool

already try but not pwr on only 9008 port create

**U.M.T** · 01-22-2018, 13:56

Try read firmware operation in QcFire and post result.

Br,
Ultimate Multi Tool

khurshid_bc · 01-22-2018, 18:55

Quote:

Originally Posted by coderinside

now dead only 9008 port create

Code:

Port    : Fastboot Interface
Baud Rate    : Not Applicable
Device    : Motorola QC
Operation    : Flash
Fw Model    : condor_retaildsds
Fw Version    : condor_retaildsds-user 5.1 LPCS23.13-34.8-3 3 release-keysMSM8610BP_18033.4614.45.00R
Searching for Device in FastBoot Mode... OK
Reading Phone Information...
Model    : XT1022
Boot Ver.    : 5009
Baseband    : Not Found
Software    : Blur_Version.21.12.40.condor_retaildsds.retaildsdsall.en.03
IMEI    : 35xxxxxxxxxxxxxxx
CPU    : MSM8210 CS
RAM    : 1024MB Hynix S4 SDRAM DIE=4Gb
EMMC    : 4GB Hynix REV=06 PRV=05 TYPE=17
Sending Data [partition]... Done
Sending Data [motoboot]... Done
Sending Data [logo]... Done
Sending Data [boot]... Done
Sending Data [recovery]... Done
Sending Data [system]... Done
Sending Data [system]... Done
Sending Data [system]... Done
Sending Data [system]... Done
Sending Data [modem]... Done
Erasing [modemst1]... Done
Erasing [modemst2]... Done
Sending Data [fsg]... Done
Erasing [cache]... Done
Erasing [userdata]... Done
Operation Finished.
Elapsed Time: 02:48
[Module Ver. 4.4]
Log Saved to Logs\180120_142739.log

xt1022 flashed successfully with umt u can try with same version

khurshid_bc · 01-22-2018, 18:56

Port : Fastboot Interface
Baud Rate : Not Applicable
Device : Motorola QC
Operation : Flash
Fw Model : condor_retaildsds
Fw Version : condor_retaildsds-user 5.1 LPCS23.13-34.8-3 3 release-keysMSM8610BP_18033.4614.45.00R
Searching for Device in FastBoot Mode... OK
Reading Phone Information...
Model : XT1022
Boot Ver. : 500E
Baseband : MSM8610BP_18033.4614.45.00R EMEA_DSDS_CUST
Software : Blur_Version.23.201.3.condor_retaildsds.retaildsds all.en.03
IMEI : 359301057501578
CPU : MSM8210 CS
RAM : 1024MB Hynix S4 SDRAM DIE=4Gb
EMMC : 4GB Hynix REV=06 PRV=05 TYPE=17
Sending Data [partition]... Done
Sending Data [motoboot]... Done
Sending Data [logo]... Done
Sending Data [boot]... Done
Sending Data [recovery]... Done
Sending Data [system]... Done
Sending Data [system]... Done
Sending Data [system]... Done
Sending Data [system]... Done
Sending Data [modem]... Done
Erasing [modemst1]... Done
Erasing [modemst2]... Done
Sending Data [fsg]... Done
Erasing [cache]... Done
Erasing [userdata]... Done
Operation Finished.
Elapsed Time: 02:56
[Module Ver. 4.4]

coderinside · 01-23-2018, 17:17

Quote:

Originally Posted by U.M.T

Try read firmware operation in QcFire and post result.

Br,
Ultimate Multi Tool

i return the set to the customer

if got again then give result sure

01-20-2018, 10:03	#2 (permalink)
U.M.T Product Manager Join Date: Sep 2015 Location: Inside UMT Posts: 9,405 Member: 2465108 Status: Offline Sonork: No More Used Thanks Meter: 13,432	Almost impossible! Try reset power by holding Pwr button for a long time. Br, Ultimate Multi Tool

01-22-2018, 13:56	#4 (permalink)
U.M.T Product Manager Join Date: Sep 2015 Location: Inside UMT Posts: 9,405 Member: 2465108 Status: Offline Sonork: No More Used Thanks Meter: 13,432	Try read firmware operation in QcFire and post result. Br, Ultimate Multi Tool

01-22-2018, 18:56	#6 (permalink)
khurshid_bc Freak Poster Join Date: May 2010 Posts: 110 Member: 1296452 Status: Offline Thanks Meter: 67	Port : Fastboot Interface Baud Rate : Not Applicable Device : Motorola QC Operation : Flash Fw Model : condor_retaildsds Fw Version : condor_retaildsds-user 5.1 LPCS23.13-34.8-3 3 release-keysMSM8610BP_18033.4614.45.00R Searching for Device in FastBoot Mode... OK Reading Phone Information... Model : XT1022 Boot Ver. : 500E Baseband : MSM8610BP_18033.4614.45.00R EMEA_DSDS_CUST Software : Blur_Version.23.201.3.condor_retaildsds.retaildsds all.en.03 IMEI : 359301057501578 CPU : MSM8210 CS RAM : 1024MB Hynix S4 SDRAM DIE=4Gb EMMC : 4GB Hynix REV=06 PRV=05 TYPE=17 Sending Data [partition]... Done Sending Data [motoboot]... Done Sending Data [logo]... Done Sending Data [boot]... Done Sending Data [recovery]... Done Sending Data [system]... Done Sending Data [system]... Done Sending Data [system]... Done Sending Data [system]... Done Sending Data [modem]... Done Erasing [modemst1]... Done Erasing [modemst2]... Done Sending Data [fsg]... Done Erasing [cache]... Done Erasing [userdata]... Done Operation Finished. Elapsed Time: 02:56 [Module Ver. 4.4]