T505n 9008 port stuck - GSM-Forum

azeem781986 · Yesterday, 13:03

hi all just have T505n bit 6
need to do just read information log here

Code:

Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port	: Qualcomm HS-USB QDLoader 9008 (COM113)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID	: E1D01400 [SDM662] 00002000
OPK_DATA	: C9F0E4B25EEBFDC57496ABA9C04566BED147E0D76DCADA91F4A625B18D3C8138
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM662_006]...Write Error!
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 9.5

now tablet stuck in edl mode
force reboot not working asking for correct loader during unbrick with edl samsung firmware log here

Code:

Operation	: Samsung Unbrick
Checking for existing devices...Found
Port	: Qualcomm HS-USB QDLoader 9008 (COM61)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID	: E1D01400 [SDM662] 00002000
OPK_DATA	: C9F0E4B25EEBFDC57496ABA9C04566BED147E0D76DCADA91F4A625B18D3C8138
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM662_006]...Write Error!
Please use correct loader and check USB port / cable.
Operation Failed.
QcFire Ver. 9.5

how to unbrick or need loader for T505N U6. thanks in advance best team.

bk.gsm · Yesterday, 15:43

you need to disconnect the battery..
and you should select the model from the models selection list

b.r.

azeem781986 · Yesterday, 16:33

T505N model not in models list

if I reconnect the battery, will the device start working?

Yesterday, 15:43	#2 (permalink)
bk.gsm Product Supporter Join Date: Sep 2008 Location: UMT Support section Age: 33 Posts: 3,772 Member: 869809 Status: Offline Thanks Meter: 1,706	you need to disconnect the battery.. and you should select the model from the models selection list b.r.

Yesterday, 16:33	#3 (permalink)
azeem781986 No Life Poster Join Date: May 2007 Location: InsidE AndroiD Age: 37 Posts: 1,906 Member: 503161 Status: Offline Sonork: 100.1584069 Thanks Meter: 473	T505N model not in models list if I reconnect the battery, will the device start working?