★★★ Post Here All Successfully Repaired Phones by Ultimate Multi Tool ★★★ - Page 52 - GSM-Forum

bencharqui1 · 07-11-2016, 20:45

g318h flash done

rehmani · 07-12-2016, 06:57

g530h unlock done

Code:

Port    : COM41 : SAMSUNG Mobile USB Modem #7
Baud Rate    : 115200
Device    : Samsung G361H
Operation    : Read Info
Opening Port... OK
Reading Information... OK
Model    : SM-G530H
IMEI    : 35283207696----
Version Info    : G530HXCU1AOE2
    : G530HOJV1AOF1
    : G530HXCU1AOE2
    : G530HXCU1AOE2
Port Closed.
Operation Finished.
Elapsed Time: 00:04
[Module Ver. 2.5]
Log Saved to Logs\160712_112522.log

Port    : COM40 : SAMSUNG Mobile USB Serial Port  (COM40)
Baud Rate    : 115200
Device    : Samsung G530H
Operation    : Unlock
Opening Port... OK
Reading Phone Information... OK
Compile    : May 14 2015 09:56:34
Release    : May 07 2015 21:00:00
Hw. Ver.    : EAAAANVZ
ESN    : B0000000
MEID    : 00000000000000
IMEI    : 35283207696----
Switching to Offline Mode... OK
Preparing Phone... OK
Unlocking Phone, Please wait... OK
Resetting Phone... OK
If Phone does not restart, do it manually.
Port Closed.
Operation Finished.
Elapsed Time: 00:04
[Module Ver. 2.5]
Log Saved to Logs\160712_112724.log

maqsod · 07-12-2016, 09:31

samsung G531H FRP UNLOCK

Device: GT-I8190
Operation: Reset FRP / RL / EE
Port: COM11 : SAMSUNG Mobile USB Modem #4
Checking for Device... Found [Download Mode]
Reading Data from Phone... Done
Chipset: SPRD8735 [HiSpeed]
Resetting FRP Lock Data... Done
Elapsed Time: 00:11

rehmani · 07-12-2016, 13:49

motorola xt1022 flash done
Port : Fastboot Interface
Baud Rate : Not Applicable
Device : Motorola QC
Operation : Flash
Fw Model : condor
Fw Version : condor_retaildsds-user 4.4.4 KXC21.5-40 46 release-keysMSM8610BP_1034.307.26.02P
Searching for Device in FastBoot Mode... OK
Reading Phone Information...
Model : XT1022
Boot Ver. : 5009
Baseband : Not Found
Software : Blur_Version.21.12.40.condor_retaildsds.retaildsds all.en.03
IMEI : 353317066014045
CPU : MSM8210 CS
RAM : 1024MB Hynix S4 SDRAM DIE=4Gb
EMMC : 4GB Hynix REV=06 PRV=05 TYPE=17
Sending Data [partition]... Done
Sending Data [motoboot]... Done
Sending Data [logo]... Done
Sending Data [boot]... Done
Sending Data [recovery]... Done
Sending Data [system]... Done
Sending Data [system]... Done
Sending Data [system]... Done
Sending Data [modem]... Done
Erasing [modemst1]... Done
Erasing [modemst2]... Done
Sending Data [fsg]... Done
Operation Finished.
Elapsed Time: 02:59
[Module Ver. 2.5]
Log Saved to Logs\160712_181420.log

rehmani · 07-12-2016, 13:56

samsung a300 unlock done
Port : COM49 : SAMSUNG Mobile USB Modem #9
Baud Rate : 115200
Device : Samsung G360H
Operation : Read Info
Opening Port... OK
Reading Information... OK
Model : SM-A300F
IMEI : 35725806421---
Version Info : A300FXXU1AOAH
: A300FOJV1AOB1
: A300FXXU1AOA5
: A300FXXU1AOAH
Port Closed.
Operation Finished.
Elapsed Time: 00:04
[Module Ver. 2.5]
Log Saved to Logs\160712_182513.log

Port : COM48 : SAMSUNG Mobile USB Serial Port (COM48)
Baud Rate : 115200
Device : Samsung A300H
Operation : Unlock
Opening Port... OK
Reading Phone Information... OK
Compile : Jan 9 2015 13:57:15
Release : Nov 28 2014 03:00:00
Hw. Ver. : EAAAANVZ
ESN : B0000000
MEID : 00000000000000
IMEI : 35725806421----
Switching to Offline Mode... OK
Preparing Phone... OK
Unlocking Phone, Please wait... OK
Resetting Phone... OK
If Phone does not restart, do it manually.
Port Closed.
Operation Finished.
Elapsed Time: 00:04
[Module Ver. 2.5]
Log Saved to Logs\160712_182627.log

maqsod · 07-12-2016, 14:55

s5282 flash with odin & another tool fail

With same file UMT flash successfully

Device: GT-I8190
Operation: Flash Firmware
Port: COM11 : SAMSUNG Mobile USB Modem #4
Checking for Device... Found [Download Mode]
Reading Data from Phone... Done
Chipset: SPRD8810 [HiSpeed]
Sending Partition [DSP]... Done
Sending Partition [KERNEL]... Done
Sending Partition [RECOVERY]... Done
Sending Partition [modem]... Done
Sending Partition [CSC]... Done
Sending Partition [system]... Done
Sending Partition [HIDDEN]... Done
Sending Partition [PARAM]... Done
Closing Session... Done
Operation Finished.
Elapsed Time: 09:06

spd3 · 07-13-2016, 08:11

huawei imei null repair by UMT BOX

Port : ADB Interface
Baud Rate : Not Applicable
Device : Android MTK
Operation : IMEI Repair
Searching for Device... Found
Model : HUAWEI G610-U15
Version : 4.2.1
Hardware : mt6589
Baseband : Unknown
Basedband Not Found!
Try Read Info Again After Boot Finished!
Possibly Device May Not Have SIM Function!
SIM Card : NOT_READY
CPU : armeabi-v7a
Type : GSM
IMEI(1) : null
Checking Root Access... OK
Root : Rooted
Reading Data from Phone... Done
Backup : NVRAM_HUAWEI G610-U15_mt6589_4.2.1_null_160713_014824.Bak
IMEI To Repair -
IMEI[1] : 867000776359997
Preparing Data.... Done
Updating IMEI Information... Done
Rebooting Phone... Done
Operation Finished.
Elapsed Time: 00:21
[Module Ver. 2.6]

spd3 · 07-13-2016, 08:13

MOTO G 2ND XT1063 6.0 DONE BY UMT

Port : Fastboot Interface
Baud Rate : Not Applicable
Device : Motorola QC
Operation : Flash
Fw Model : titan_retla
Fw Version : titan_retla-user 6.0 MPB24.65-34 32 release-keysMSM8626BP_1032.3116.99.00R
Searching for Device in FastBoot Mode... OK
Reading Phone Information...
Model : XT1063
Boot Ver. : 4886
Baseband : Not Found
Software : Blur_Version.21.11.24.titan_retla.retla.en.01
IMEI : 359297054XXXXXX
CPU : MSM8226 CS
RAM : 1024MB Hynix S4 SDRAM DIE=4Gb
EMMC : 16GB Sandisk REV=07 PRV=01 TYPE=57
Sending Data [partition]... Done
Sending Data [motoboot]... Done
Sending Data [logo]... Done
Sending Data [boot]... Done
Sending Data [recovery]... Done
Sending Data [system]... Done
Sending Data [system]... Done
Sending Data [system]... Done
Sending Data [system]... Done
Sending Data [modem]... Done
Erasing [modemst1]... Done
Erasing [modemst2]... Done
Sending Data [fsg]... Done
Erasing [cache]... Done
Erasing [userdata]... Done
Operation Finished.
Elapsed Time: 01:37
[Module Ver. 2.6]
Log Saved to Logs\160713_021042.log

bencharqui1 · 07-13-2016, 15:10

IMEI Repair (META) done

Quote:

Port : COM27 : MediaTek USB VCOM (Android) (COM27)
Baud Rate : 921600
Device : MTK Android
Operation : IMEI Repair (META)
Opening Port... OK
Reading Phone Information... Done
CPU : MT6572, E01
Software : MOLY.WR8.W1315.MD.WG.MP.V43.P2
Hardware : HUAQIN72_CWET_1A_KK_HSPA_HW
Reading Data.... Done
Writing IMEI[1] 868028022749511.... Done
Writing IMEI[2] 868028022850517.... Done
Operation Finished.
Elapsed Time: 00:03
[Module Ver. 2.6]

rehmani · 07-13-2016, 15:12

zte s194 unlock done
Port : COM53 : ZTE CDMA Handset Diagnostics Interface (COM53)
Baud Rate : 921600
Device : ZTE S194
Operation : Unlock
Opening Port... OK
Reading Information... OK
Compile : Jan 07 2015 09:41:44
Release : Apr 24 2009 24:00:00
Hw Ver. : RIC_S194
ESN : 80491---
MEID : A000004E9F----
Unlocking Security... OK
Build : RIC_S194_CAM_RBTL21FV1.1
Soft Ver. : RIC_P110B03_RBTL21FV1.0.0B06
Detected : S194
User Code : 0000
Checking if Supported for Unlock... OK
Setting Offline Mode... OK
Unlocking Phone (EFS Method)... OK
Resetting Phone... OK
Port Closed.
Operation Finished.
Time Taken: 00:01
Module Ver. [1.5]
Log Saved to Logs\160713_194307.log

rehmani · 07-13-2016, 15:14

haire c381 unlock done
Port : COM56 : HS-USB Wireless Diagnostics 3004 (COM56)
Baud Rate : 921600
Device : Haier C381
Operation : Unlock
Opening Port... OK
Reading Information... OK
Compile : Nov 07 2014 15:20:18
Release : Apr 29 2011 05:00:00
Hw Ver. : S001
ESN : 8020E---
MEID : A1000045AA----
BUILD : HC-C381_R-S001
Setting Download Mode... OK
Reconnecting Phone... OK
Preparing Phone.. OK
Sending Bootloader... OK
Executing Bootloader... OK
Syncing Phone... OK
Initializing Flash Chip... OK
Flash Chip : SAMSUNG K5N1229ACD
Chip Size : 16 MB
Patching Firmware... OK
Resetting Phone... OK
Port Closed.
Operation Finished.
Time Taken: 00:13
Module Ver. [1.5]
Log Saved to Logs\160713_194506.log[/CODE]

mediapeople · 07-13-2016, 22:02

MOTO E2 XT1521 FRP DONE SUCCESSFUL
Port : ADB Interface
Baud Rate : Not Applicable
Device : Generic
Operation : Motorola FRP Reset
Searching for Device... Found
Model : MotoE2(4G-LTE)
Version : 5.1.1
Hardware : qcom
Baseband : M8916_2020617.29.03.21.45R SURNIA_EMEA_DSDS_CUST
SIM Card : ABSENT,ABSENT
CPU : armeabi-v7a
Type : Unknown
MEID(1) : Null/Empty
Root : Not Rooted
Resetting FRP Lock... Done
Operation Finished.
Elapsed Time: 00:11
[Module Ver. 2.6]

rehmani · 07-14-2016, 07:47

zte s194 unlock done

Code:

Port    : COM53 : ZTE CDMA Handset Diagnostics Interface (COM53)
Baud Rate    : 921600
Device    : ZTE S194
Operation    : Unlock
Opening Port... OK
Reading Information... OK
Compile    : Jan 07 2015 09:41:44
Release    : Apr 24 2009 24:00:00
Hw Ver.    : RIC_S194
ESN    : 80E9F---
MEID    : A1000049B6----
Unlocking Security... OK
Build    : RIC_S194_CAM_RBTL21FV1.1
Soft Ver.    : RIC_P110B03_RBTL21FV1.0.0B06
Detected    : S194
User Code    : 0000
Checking if Supported for Unlock... OK
Setting Offline Mode... OK
Unlocking Phone (EFS Method)... OK
Resetting Phone... OK
Port Closed.
Operation Finished.
Time Taken: 00:01
Module Ver. [1.5]
Log Saved to Logs\160714_121230.log

[/CODE]

rehmani · 07-14-2016, 08:11

zte s194 unlock done
Port : COM53 : ZTE CDMA Handset Diagnostics Interface (COM53)
Baud Rate : 921600
Device : ZTE S194
Operation : Unlock
Opening Port... OK
Reading Information... OK
Compile : Nov 13 2014 15:58:49
Release : Apr 24 2009 24:00:00
Hw Ver. : RIC_S194
ESN : 809114--
MEID : A000004E4B----
Unlocking Security... OK
Build : RIC_S194_CAM_RBTL21FV1.0
Soft Ver. : RIC_P110B03_RBTL21FV1.0.0B03
Detected : S194
User Code : 0000
Checking if Supported for Unlock... OK
Setting Offline Mode... OK
Unlocking Phone (EFS Method)... OK
Resetting Phone... OK
Port Closed.
Operation Finished.
Time Taken: 00:01
Module Ver. [1.5]
Log Saved to Logs\160714_121904.log

rehmani · 07-14-2016, 08:25

d286 unlock done
Port : COM61 : Qualcomm HS-USB Diagnostics 9004 (COM61)
Baud Rate : 921600
Device : Lava D286 (ZTE)
Operation : Unlock
Opening Port... OK
Reading Information... OK
Compile : Jul 08 2014 17:06:52
Release : Apr 24 2012 05:00:00
Hw Ver. : UP105D13
ESN : 802BC6--
MEID : A10000357A----
IMEI : 86449802033----
BUILD : q11x5-CG108-1030
Reading Extended Information... OK
User Code : 0000
SPC : 000000
Setting Download Mode... OK
Waiting For Reconnect... OK
Preparing Phone... OK
Sending Bootloader... OK
Executing Bootloader... OK
Initializing Flash Chip... OK
Chip Name : INTEL 512 L18 ADMux
Chip Size : 64 MB
Patching Firmware... OK
Resetting Phone... OK
Port Closed.
Operation Finished.
Time Taken: 00:20
Module Ver. [1.5]
Log Saved to Logs\160714_125438.log

07-11-2016, 20:45	#766 (permalink)
bencharqui1 No Life Poster Join Date: Aug 2011 Location: Algeria is a North African Age: 35 Posts: 1,879 Member: 1629321 Status: Offline Thanks Meter: 823	g318h flash done

07-12-2016, 09:31	#768 (permalink)
maqsod No Life Poster Join Date: Dec 2007 Posts: 645 Member: 666362 Status: Offline Thanks Meter: 134	samsung G531H FRP UNLOCK Device: GT-I8190 Operation: Reset FRP / RL / EE Port: COM11 : SAMSUNG Mobile USB Modem #4 Checking for Device... Found [Download Mode] Reading Data from Phone... Done Chipset: SPRD8735 [HiSpeed] Resetting FRP Lock Data... Done Elapsed Time: 00:11

07-12-2016, 13:49	#769 (permalink)
rehmani No Life Poster Join Date: Aug 2006 Location: proud to be an INDIAN Muslim Age: 39 Posts: 5,175 Member: 333199 Status: Offline Sonork: may i help u just pm me Thanks Meter: 2,405	motorola xt1022 flash done Port : Fastboot Interface Baud Rate : Not Applicable Device : Motorola QC Operation : Flash Fw Model : condor Fw Version : condor_retaildsds-user 4.4.4 KXC21.5-40 46 release-keysMSM8610BP_1034.307.26.02P Searching for Device in FastBoot Mode... OK Reading Phone Information... Model : XT1022 Boot Ver. : 5009 Baseband : Not Found Software : Blur_Version.21.12.40.condor_retaildsds.retaildsds all.en.03 IMEI : 353317066014045 CPU : MSM8210 CS RAM : 1024MB Hynix S4 SDRAM DIE=4Gb EMMC : 4GB Hynix REV=06 PRV=05 TYPE=17 Sending Data [partition]... Done Sending Data [motoboot]... Done Sending Data [logo]... Done Sending Data [boot]... Done Sending Data [recovery]... Done Sending Data [system]... Done Sending Data [system]... Done Sending Data [system]... Done Sending Data [modem]... Done Erasing [modemst1]... Done Erasing [modemst2]... Done Sending Data [fsg]... Done Operation Finished. Elapsed Time: 02:59 [Module Ver. 2.5] Log Saved to Logs\160712_181420.log

07-12-2016, 13:56	#770 (permalink)
rehmani No Life Poster Join Date: Aug 2006 Location: proud to be an INDIAN Muslim Age: 39 Posts: 5,175 Member: 333199 Status: Offline Sonork: may i help u just pm me Thanks Meter: 2,405	samsung a300 unlock done Port : COM49 : SAMSUNG Mobile USB Modem #9 Baud Rate : 115200 Device : Samsung G360H Operation : Read Info Opening Port... OK Reading Information... OK Model : SM-A300F IMEI : 35725806421--- Version Info : A300FXXU1AOAH : A300FOJV1AOB1 : A300FXXU1AOA5 : A300FXXU1AOAH Port Closed. Operation Finished. Elapsed Time: 00:04 [Module Ver. 2.5] Log Saved to Logs\160712_182513.log Port : COM48 : SAMSUNG Mobile USB Serial Port (COM48) Baud Rate : 115200 Device : Samsung A300H Operation : Unlock Opening Port... OK Reading Phone Information... OK Compile : Jan 9 2015 13:57:15 Release : Nov 28 2014 03:00:00 Hw. Ver. : EAAAANVZ ESN : B0000000 MEID : 00000000000000 IMEI : 35725806421---- Switching to Offline Mode... OK Preparing Phone... OK Unlocking Phone, Please wait... OK Resetting Phone... OK If Phone does not restart, do it manually. Port Closed. Operation Finished. Elapsed Time: 00:04 [Module Ver. 2.5] Log Saved to Logs\160712_182627.log

07-12-2016, 14:55	#771 (permalink)
maqsod No Life Poster Join Date: Dec 2007 Posts: 645 Member: 666362 Status: Offline Thanks Meter: 134	s5282 flash with odin & another tool fail With same file UMT flash successfully Device: GT-I8190 Operation: Flash Firmware Port: COM11 : SAMSUNG Mobile USB Modem #4 Checking for Device... Found [Download Mode] Reading Data from Phone... Done Chipset: SPRD8810 [HiSpeed] Sending Partition [DSP]... Done Sending Partition [KERNEL]... Done Sending Partition [RECOVERY]... Done Sending Partition [modem]... Done Sending Partition [CSC]... Done Sending Partition [system]... Done Sending Partition [HIDDEN]... Done Sending Partition [PARAM]... Done Closing Session... Done Operation Finished. Elapsed Time: 09:06

07-13-2016, 08:11	#772 (permalink)
spd3 No Life Poster Join Date: Dec 2013 Location: ecuador Posts: 808 Member: 2078045 Status: Offline Thanks Meter: 151	huawei imei null repair by UMT BOX Port : ADB Interface Baud Rate : Not Applicable Device : Android MTK Operation : IMEI Repair Searching for Device... Found Model : HUAWEI G610-U15 Version : 4.2.1 Hardware : mt6589 Baseband : Unknown Basedband Not Found! Try Read Info Again After Boot Finished! Possibly Device May Not Have SIM Function! SIM Card : NOT_READY CPU : armeabi-v7a Type : GSM IMEI(1) : null Checking Root Access... OK Root : Rooted Reading Data from Phone... Done Backup : NVRAM_HUAWEI G610-U15_mt6589_4.2.1_null_160713_014824.Bak IMEI To Repair - IMEI[1] : 867000776359997 Preparing Data.... Done Updating IMEI Information... Done Rebooting Phone... Done Operation Finished. Elapsed Time: 00:21 [Module Ver. 2.6]

07-13-2016, 08:13	#773 (permalink)
spd3 No Life Poster Join Date: Dec 2013 Location: ecuador Posts: 808 Member: 2078045 Status: Offline Thanks Meter: 151	MOTO G 2ND XT1063 6.0 DONE BY UMT Port : Fastboot Interface Baud Rate : Not Applicable Device : Motorola QC Operation : Flash Fw Model : titan_retla Fw Version : titan_retla-user 6.0 MPB24.65-34 32 release-keysMSM8626BP_1032.3116.99.00R Searching for Device in FastBoot Mode... OK Reading Phone Information... Model : XT1063 Boot Ver. : 4886 Baseband : Not Found Software : Blur_Version.21.11.24.titan_retla.retla.en.01 IMEI : 359297054XXXXXX CPU : MSM8226 CS RAM : 1024MB Hynix S4 SDRAM DIE=4Gb EMMC : 16GB Sandisk REV=07 PRV=01 TYPE=57 Sending Data [partition]... Done Sending Data [motoboot]... Done Sending Data [logo]... Done Sending Data [boot]... Done Sending Data [recovery]... Done Sending Data [system]... Done Sending Data [system]... Done Sending Data [system]... Done Sending Data [system]... Done Sending Data [modem]... Done Erasing [modemst1]... Done Erasing [modemst2]... Done Sending Data [fsg]... Done Erasing [cache]... Done Erasing [userdata]... Done Operation Finished. Elapsed Time: 01:37 [Module Ver. 2.6] Log Saved to Logs\160713_021042.log

07-13-2016, 15:12	#775 (permalink)
rehmani No Life Poster Join Date: Aug 2006 Location: proud to be an INDIAN Muslim Age: 39 Posts: 5,175 Member: 333199 Status: Offline Sonork: may i help u just pm me Thanks Meter: 2,405	zte s194 unlock done Port : COM53 : ZTE CDMA Handset Diagnostics Interface (COM53) Baud Rate : 921600 Device : ZTE S194 Operation : Unlock Opening Port... OK Reading Information... OK Compile : Jan 07 2015 09:41:44 Release : Apr 24 2009 24:00:00 Hw Ver. : RIC_S194 ESN : 80491--- MEID : A000004E9F---- Unlocking Security... OK Build : RIC_S194_CAM_RBTL21FV1.1 Soft Ver. : RIC_P110B03_RBTL21FV1.0.0B06 Detected : S194 User Code : 0000 Checking if Supported for Unlock... OK Setting Offline Mode... OK Unlocking Phone (EFS Method)... OK Resetting Phone... OK Port Closed. Operation Finished. Time Taken: 00:01 Module Ver. [1.5] Log Saved to Logs\160713_194307.log

07-13-2016, 15:14	#776 (permalink)
rehmani No Life Poster Join Date: Aug 2006 Location: proud to be an INDIAN Muslim Age: 39 Posts: 5,175 Member: 333199 Status: Offline Sonork: may i help u just pm me Thanks Meter: 2,405	haire c381 unlock done Port : COM56 : HS-USB Wireless Diagnostics 3004 (COM56) Baud Rate : 921600 Device : Haier C381 Operation : Unlock Opening Port... OK Reading Information... OK Compile : Nov 07 2014 15:20:18 Release : Apr 29 2011 05:00:00 Hw Ver. : S001 ESN : 8020E--- MEID : A1000045AA---- BUILD : HC-C381_R-S001 Setting Download Mode... OK Reconnecting Phone... OK Preparing Phone.. OK Sending Bootloader... OK Executing Bootloader... OK Syncing Phone... OK Initializing Flash Chip... OK Flash Chip : SAMSUNG K5N1229ACD Chip Size : 16 MB Patching Firmware... OK Resetting Phone... OK Port Closed. Operation Finished. Time Taken: 00:13 Module Ver. [1.5] Log Saved to Logs\160713_194506.log[/CODE]

07-13-2016, 22:02	#777 (permalink)
mediapeople No Life Poster Join Date: Apr 2008 Location: inside forum Posts: 1,285 Member: 759477 Status: Offline Sonork: 100.1618763 Thanks Meter: 111	MOTO E2 XT1521 FRP DONE SUCCESSFUL Port : ADB Interface Baud Rate : Not Applicable Device : Generic Operation : Motorola FRP Reset Searching for Device... Found Model : MotoE2(4G-LTE) Version : 5.1.1 Hardware : qcom Baseband : M8916_2020617.29.03.21.45R SURNIA_EMEA_DSDS_CUST SIM Card : ABSENT,ABSENT CPU : armeabi-v7a Type : Unknown MEID(1) : Null/Empty Root : Not Rooted Resetting FRP Lock... Done Operation Finished. Elapsed Time: 00:11 [Module Ver. 2.6]

07-14-2016, 08:11	#779 (permalink)
rehmani No Life Poster Join Date: Aug 2006 Location: proud to be an INDIAN Muslim Age: 39 Posts: 5,175 Member: 333199 Status: Offline Sonork: may i help u just pm me Thanks Meter: 2,405	zte s194 unlock done Port : COM53 : ZTE CDMA Handset Diagnostics Interface (COM53) Baud Rate : 921600 Device : ZTE S194 Operation : Unlock Opening Port... OK Reading Information... OK Compile : Nov 13 2014 15:58:49 Release : Apr 24 2009 24:00:00 Hw Ver. : RIC_S194 ESN : 809114-- MEID : A000004E4B---- Unlocking Security... OK Build : RIC_S194_CAM_RBTL21FV1.0 Soft Ver. : RIC_P110B03_RBTL21FV1.0.0B03 Detected : S194 User Code : 0000 Checking if Supported for Unlock... OK Setting Offline Mode... OK Unlocking Phone (EFS Method)... OK Resetting Phone... OK Port Closed. Operation Finished. Time Taken: 00:01 Module Ver. [1.5] Log Saved to Logs\160714_121904.log

07-14-2016, 08:25	#780 (permalink)
rehmani No Life Poster Join Date: Aug 2006 Location: proud to be an INDIAN Muslim Age: 39 Posts: 5,175 Member: 333199 Status: Offline Sonork: may i help u just pm me Thanks Meter: 2,405	d286 unlock done Port : COM61 : Qualcomm HS-USB Diagnostics 9004 (COM61) Baud Rate : 921600 Device : Lava D286 (ZTE) Operation : Unlock Opening Port... OK Reading Information... OK Compile : Jul 08 2014 17:06:52 Release : Apr 24 2012 05:00:00 Hw Ver. : UP105D13 ESN : 802BC6-- MEID : A10000357A---- IMEI : 86449802033---- BUILD : q11x5-CG108-1030 Reading Extended Information... OK User Code : 0000 SPC : 000000 Setting Download Mode... OK Waiting For Reconnect... OK Preparing Phone... OK Sending Bootloader... OK Executing Bootloader... OK Initializing Flash Chip... OK Chip Name : INTEL 512 L18 ADMux Chip Size : 64 MB Patching Firmware... OK Resetting Phone... OK Port Closed. Operation Finished. Time Taken: 00:20 Module Ver. [1.5] Log Saved to Logs\160714_125438.log