★★★ Post Here All Successfully Repaired Phones by Ultimate Multi Tool ★★★ - Page 456 - GSM-Forum

VIJAY2U2 · 05-05-2019, 18:17

Code:

Operation	: Disable Locks
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port	: Qualcomm HS-USB QDLoader 9008 (COM71)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID	: E1A00900 [8953] 00000000
OPK_DATA	: 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_009]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware	: 8953, eMMC, 32 GB
LU Count	: 1 [0x03A3E000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device	: Xiaomi Redmi 5 [msm8953]
Software	: N2G47H, V10.1.2.0.NDAMIFI [Tue Nov  6 20:22:29 WIB 2018]
Android Ver.	: 7.1.2
Patch Level	: 2018-07-01
USERDATA	: Encrypted
Disabling Android

VIJAY2U2 · 05-05-2019, 18:18

Code:

Operation	: Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port	: Qualcomm HS-USB QDLoader 9008 (COM71)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID	: E1600500 [8917] 00000000
OPK_DATA	: 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware	: 8917, eMMC, 16 GB
LU Count	: 1 [0x01D1F000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device	: Xiaomi Redmi Note 5A [msm8937]
Software	: N2G47H, V8.5.5.0.NDFMIED [Wed Sep 27 21:52:15 WIB 2017]
Android Ver.	: 7.1.2
Patch Level	: 2017-09-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 4.1

VIJAY2U2 · 05-05-2019, 18:20

Code:

Operation	: Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port	: Qualcomm HS-USB QDLoader 9008 (COM71)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID	: E1600500 [8917] 00000000
OPK_DATA	: 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4FFF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917_001]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware	: 8917, eMMC, 16 GB
LU Count	: 1 [0x01D1F000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device	: vivo vivo 1724
Software	: OPM1.171019.011 release-keys, eng.compil.20190325.173405 [Mon Mar 25 17:34:05 CST 2019]
Android Ver.	: 8.1.0
Patch Level	: 2019-03-01
Preparing Data...Done
Formatting Userdata...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 4.1

VIJAY2U2 · 05-05-2019, 18:21

Code:

Operation	: Read Pattern Lock
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port	: Qualcomm HS-USB QDLoader 9008 (COM56)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID	: E1B09000 [8936] 01000100
OPK_DATA	: 5F5DBD11259E7F99680B3D60E74EC73BDD5387694EA6D96CBF808A68A7369E82
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8936_004]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware	: 8936, eMMC, 16 GB
LU Count	: 1 [0x01D1F000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device	: LENOVO Lenovo A6020a46 [msm8916]
Software	: A6020a46_S056_161019_ROW, A6020a46_S056_161019_ROW [Wed Oct 19 17:50:08 CST 2016]
Android Ver.	: 5.1.1
Patch Level	: 2016-10-01
USERDATA	: Normal
Reading Pattern Data...Done
Pattern	: 7415369
Operation Finished.
QcFire Ver. 4.1

VIJAY2U2 · 05-05-2019, 18:22

Code:

Operation	: Reset FRP
Checking for existing devices...Found
Port	: Qualcomm HS-USB QDLoader 9008 (COM156)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID	: E1507000 [8916] 00000000
OPK_DATA	: 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8916_014]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware	: 8916, eMMC, 16 GB
LU Count	: 1 [0x01D1F000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device	: vivo vivo Y21L [msm8916]
Software	: LMY47V release-keys, eng.compiler.20160628 [Tue Jun 28 21:07:37 CST 2016]
Android Ver.	: 5.1.1
Patch Level	: 2016-06-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 4.1

VIJAY2U2 · 05-05-2019, 18:24

Code:

Operation	: Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port	: Qualcomm HS-USB QDLoader 9008 (COM156)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID	: E1A00900 [8953] 00000000
OPK_DATA	: 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_009]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware	: 8953, eMMC, 16 GB
LU Count	: 1 [0x01D5A000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device	: Xiaomi Redmi 5 [msm8953]
Software	: N2G47H, V10.1.2.0.NDAMIFI [Tue Nov  6 20:22:29 WIB 2018]
Android Ver.	: 7.1.2
Patch Level	: 2018-07-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 4.1

VIJAY2U2 · 05-05-2019, 18:26

Code:

Operation	: Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port	: Qualcomm HS-USB QDLoader 9008 (COM4)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID	: E1709400 [8996] 00000000
OPK_DATA	: BAC2C97A4405E03BFB40AD19DF8F9A739F81D923E5615B06F9167BB9D9876DC4
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8996_018]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware	: MSM8996, UFS, 32 GB
LU Count	: 6 [0x00628C00] [0x00000400] [0x00000400] [0x00008000] [0x00140000] [0x00002000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [4096], Out: 131072, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK
Device	: LeMobile Le X821 [msm8996]
Software	: FGXOSOP5902112011S release-keys, LE_X820_STATIONARY [Thu Dec  1 03:57:02 CST 2016]
Android Ver.	: 6.0.1
Patch Level	: 2016-12-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 4.1

VIJAY2U2 · 05-05-2019, 18:28

Code:

Operation	: Reset Mi Account
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port	: Qualcomm HS-USB QDLoader 9008 (COM4)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID	: E1F00400 [8937] 00000000
OPK_DATA	: 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware	: 8937, eMMC, 32 GB
LU Count	: 1 [0x03A3E000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device	: Xiaomi Redmi 3S [msm8937]
Software	: MMB29M, V8.5.3.0.MALMIED [Sat Jun 24 14:56:49 WIB 2017]
Android Ver.	: 6.0.1
Patch Level	: 2017-04-01
Resetting Mi Account Data...Done
Preparing Data...Done
Formatting Userdata...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------
New Firmware may cause hang on logo.
In such case, you need to flash phone to recover.
Or downgrade firmware and try Reset Mi Account again.
Operation Finished.
QcFire Ver. 4.1

VIJAY2U2 · 05-05-2019, 18:29

Code:

Operation	: Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port	: Qualcomm HS-USB QDLoader 9008 (COM4)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID	: E1009600 [8909] 00000000
OPK_DATA	: 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [2]
Preparing Loader...Done
Sending Loader [8909_012]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware	: 8909, eMMC, 8 GB
LU Count	: 1 [0x00E90000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device	: LYF LS-4503 [msm8909]
Software	: LS-4503-S10A_LYF_L11EN_210_160115, fd9d8f9 [Mon Feb 20 10:03:20 CST 2017]
Android Ver.	: 5.1.1
Patch Level	: 2016-08-01
Preparing Data...Done
Formatting Userdata...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 4.1

ramsay05 · 05-06-2019, 12:29

Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM4)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1B00600 [8937] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_003]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8937, eMMC, 16 GB
LU Count : 1 [0x01D5A000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi 4X [msm8937]
Software : N2G47H, V10.3.1.0.NAMMIXM [Thu Apr 11 20:05:35 WIB 2019]
Android Ver. : 7.1.2
Patch Level : 2018-10-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 4.1

biewolf23 · 05-06-2019, 13:40

lenovo TB-7304I Frp Done

msibashankar · 05-06-2019, 13:42

plz solve this problem

ramsay05 · 05-06-2019, 16:29

Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8937, eMMC, 16 GB
LU Count : 1 [0x01D1F000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi 3S [msm8937]
Software : MMB29M, V10.2.1.0.MALMIXM [Mon Jan 14 17:54:57 WIB 2019]
Android Ver. : 6.0.1
Patch Level : 2017-04-01
Resetting Mi Account Data...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------
New Firmware may cause hang on logo.
In such case, you need to flash phone to recover.
Or downgrade firmware and try Reset Mi Account again.
Operation Finished.
QcFire Ver. 4.1

wahablepirate · 05-07-2019, 03:28

ONEPLUS A6000 IMEI REPAIR BY UMT GSM
DIAG ENABLE BY TYPING THIS: *#801#

Port : COM205 : Qualcomm HS-USB Diagnostics 9091 (COM205)
Baud Rate : 921600
Device : OnePlus A3003
Operation : Repair IMEI
Opening Port... OK
Reading Information... OK
Compile : Jan 23 2019 14:20:47
Release : Oct 03 2018 00:00:00
Hw Ver. : sdm845.g
Build : MPSS.AT.4.0.c2.15-00007-SDM845_GEN_PACK-1.167997.2.171752.2
IMEI[1] : 867XXXXXXXXX
IMEI[2] : 867XXXXXXXXX
Writing IMEI[1] [867XXXXXXXXX]... . . Done
Verifying New IMEI... Done
Writing IMEI[2] [867XXXXXXXXXX]... . . Done
Verifying New IMEI... Done
Please Restart Phone Manually.
Operation Finished.
Elapsed Time: 00:06
[Module Ver. 5.2]
Log Saved to Logs\190507_021751.log

ramsay05 · 05-07-2019, 11:18

Operation : Repair IMEI
Searching for Device in FTM Mode...Not Found
Port : COM252 : Qualcomm HS-USB Diagnostics 9091 (COM252)
Compile : May 20 2016 09:45:21
Release : Dec 21 2015 09:00:00
Hw. Ver. : 8909.gen
Software : ----
IMEI : 092000250920153 / 092000250920153
Reading QCN Data...Done
Saved As : C:\UMTool\QcFire\QCN_Backup\8909.gen_----_092000250920153_190507_130049.qcn
Switching to EDL Mode...Done
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM4)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1009600 [8909] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A2 6AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [2]
Preparing Loader...Done
Sending Loader [8909_012]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8909, eMMC, 8 GB
LU Count : 1 [0x00E90000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Micromax Micromax Q415 [msm8909]
Software : MMX_Q415_SW_V3.3_HW_V0.2_20052016, eng.spwork.20160520.095632 [Fri May 20 09:58:13 CST 2016]
Android Ver. : 5.1.1
Saving EFS Backup.......OK
EFS Backup : EFS_Micromax_Micromax Q415_MMX_Q415_SW_V3.3_HW_V0.2_20052016_190507_1302 24.ueb
Reset EFS (Full)......Done
Port : COM252 : Qualcomm HS-USB Diagnostics 9091 (COM252)
Processing background tasks...Done
Restoring QCN Data...Done
Finalizing process...Done
Operation Finished.
QcFire Ver. 4.1

05-06-2019, 12:29	#6835 (permalink)
ramsay05 Insane Poster Join Date: Jan 2016 Location: Derbent Posts: 77 Member: 2516133 Status: Offline Thanks Meter: 55	Redmi 4x FRP reset Operation : Reset FRP Checking for existing devices...Found Port : Qualcomm HS-USB QDLoader 9008 (COM4) Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0 Opening Port...OK Init Handshake Sequence...OK Hardware ID : E1B00600 [8937] 00000000 OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B Initializing Protocol...OK Using Auto Loader Selection [1] Preparing Loader...Done Sending Loader [8937_003]...Done Executing Loader...OK Detecting Chip Type...OK Hardware : 8937, eMMC, 16 GB LU Count : 1 [0x01D5A000] WARNING! High Speed Driver is not installed. Please install driver from QcFire\Drivers folder using Device Manager. Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512 Reading Partition Table...OK Reading Device Information...OK Device : Xiaomi Redmi 4X [msm8937] Software : N2G47H, V10.3.1.0.NAMMIXM [Thu Apr 11 20:05:35 WIB 2019] Android Ver. : 7.1.2 Patch Level : 2018-10-01 Resetting FRP Lock......Done Operation Finished. QcFire Ver. 4.1

05-06-2019, 13:42	#6837 (permalink)
msibashankar Insane Poster Join Date: May 2016 Location: berhampur, odisha ,india Age: 33 Posts: 79 Member: 2571396 Status: Offline Thanks Meter: 51	error connection problems no response received plz solve this problem

05-06-2019, 16:29	#6838 (permalink)
ramsay05 Insane Poster Join Date: Jan 2016 Location: Derbent Posts: 77 Member: 2516133 Status: Offline Thanks Meter: 55	Redmi 3s Mi account remove Initializing Protocol...OK Using Auto Loader Selection [1] Preparing Loader...Done Sending Loader [8937]...Done Executing Loader...OK Detecting Chip Type...OK Hardware : 8937, eMMC, 16 GB LU Count : 1 [0x01D1F000] WARNING! High Speed Driver is not installed. Please install driver from QcFire\Drivers folder using Device Manager. Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512 Reading Partition Table...OK Reading Device Information...OK Device : Xiaomi Redmi 3S [msm8937] Software : MMB29M, V10.2.1.0.MALMIXM [Mon Jan 14 17:54:57 WIB 2019] Android Ver. : 6.0.1 Patch Level : 2017-04-01 Resetting Mi Account Data...Done When phone is completely ON, connect to Internet and add Mi Account. -------------- INFORMATION -------------- New Firmware may cause hang on logo. In such case, you need to flash phone to recover. Or downgrade firmware and try Reset Mi Account again. Operation Finished. QcFire Ver. 4.1

05-07-2019, 11:18	#6840 (permalink)
ramsay05 Insane Poster Join Date: Jan 2016 Location: Derbent Posts: 77 Member: 2516133 Status: Offline Thanks Meter: 55	Micromax Q415 factory imei repair done Operation : Repair IMEI Searching for Device in FTM Mode...Not Found Port : COM252 : Qualcomm HS-USB Diagnostics 9091 (COM252) Compile : May 20 2016 09:45:21 Release : Dec 21 2015 09:00:00 Hw. Ver. : 8909.gen Software : ---- IMEI : 092000250920153 / 092000250920153 Reading QCN Data...Done Saved As : C:\UMTool\QcFire\QCN_Backup\8909.gen_----_092000250920153_190507_130049.qcn Switching to EDL Mode...Done Checking for existing devices...Not Found Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable. Some phones may need Special Boot Cable or TestPoint for EDL mode. Found Port : Qualcomm HS-USB QDLoader 9008 (COM4) Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0 Connecting to phone...OK Waiting for response...OK Init Handshake Sequence...OK Hardware ID : E1009600 [8909] 00000000 OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A2 6AB1B4B3F1CF9E Initializing Protocol...OK Using Auto Loader Selection [2] Preparing Loader...Done Sending Loader [8909_012]...Done Executing Loader...OK Detecting Chip Type...OK Hardware : 8909, eMMC, 8 GB LU Count : 1 [0x00E90000] WARNING! High Speed Driver is not installed. Please install driver from QcFire\Drivers folder using Device Manager. Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512 Reading Partition Table...OK Reading Device Information...OK Device : Micromax Micromax Q415 [msm8909] Software : MMX_Q415_SW_V3.3_HW_V0.2_20052016, eng.spwork.20160520.095632 [Fri May 20 09:58:13 CST 2016] Android Ver. : 5.1.1 Saving EFS Backup.......OK EFS Backup : EFS_Micromax_Micromax Q415_MMX_Q415_SW_V3.3_HW_V0.2_20052016_190507_1302 24.ueb Reset EFS (Full)......Done Port : COM252 : Qualcomm HS-USB Diagnostics 9091 (COM252) Processing background tasks...Done Restoring QCN Data...Done Finalizing process...Done Operation Finished. QcFire Ver. 4.1

05-06-2019, 13:40	#6836 (permalink)
biewolf23 Crazy Poster Join Date: Dec 2014 Location: Malaysia Posts: 58 Member: 2318529 Status: Offline Thanks Meter: 71	lenovo TB-7304I Frp Done

05-07-2019, 03:28	#6839 (permalink)
wahablepirate No Life Poster Join Date: Sep 2009 Location: BURKINA FASO Posts: 1,000 Member: 1120289 Status: Offline Thanks Meter: 148	ONEPLUS A6000 IMEI REPAIR BY UMT GSM DIAG ENABLE BY TYPING THIS: *#801# Port : COM205 : Qualcomm HS-USB Diagnostics 9091 (COM205) Baud Rate : 921600 Device : OnePlus A3003 Operation : Repair IMEI Opening Port... OK Reading Information... OK Compile : Jan 23 2019 14:20:47 Release : Oct 03 2018 00:00:00 Hw Ver. : sdm845.g Build : MPSS.AT.4.0.c2.15-00007-SDM845_GEN_PACK-1.167997.2.171752.2 IMEI[1] : 867XXXXXXXXX IMEI[2] : 867XXXXXXXXX Writing IMEI[1] [867XXXXXXXXX]... . . Done Verifying New IMEI... Done Writing IMEI[2] [867XXXXXXXXXX]... . . Done Verifying New IMEI... Done Please Restart Phone Manually. Operation Finished. Elapsed Time: 00:06 [Module Ver. 5.2] Log Saved to Logs\190507_021751.log