GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Ultimate Multi Tool Box

Ultimate Multi Tool Box Multi GSM & CDMA Box

Reply
 
LinkBack Thread Tools Display Modes
Old 05-26-2019, 20:57   #6991 (permalink)
Freak Poster
 
Join Date: Nov 2016
Location: India
Posts: 150
Member: 2650288
Status: Offline
Sonork: live:hackb151
Thanks Meter: 153

oppo a33f

Operation : Read Pattern Lock
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM98)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1507000 [8916] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A2 6AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8916_014]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8916, eMMC, 16 GB
LU Count : 1 [0x01D1F000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : OPPO A37f [msm8916]
Software : A37fEX_11_171209, 1480422943 [Sat Dec 9 16:58:03 CST 2017]
Android Ver. : 5.1.1
Patch Level : 2017-12-01
USERDATA : Normal
Reading Pattern Data...Done
Pattern : 7536
Operation Finished.
QcFire Ver. 4.1

Last edited by neyaz007; 05-26-2019 at 21:00. Reason: rong post
  Reply With Quote
The Following 2 Users Say Thank You to neyaz007 For This Useful Post:
Old 05-26-2019, 21:02   #6992 (permalink)
Freak Poster
 
Join Date: Nov 2016
Location: India
Posts: 150
Member: 2650288
Status: Offline
Sonork: live:hackb151
Thanks Meter: 153
dont root bro west of time

Quote:
Originally Posted by davidf01 View Post
root with kingo root
activate diag with umt
then repair


GO TO Emergency mode
type *#3424#
this will enable diag mode and adb mode open
  Reply With Quote
Old 05-27-2019, 11:54   #6993 (permalink)
No Life Poster
 
Join Date: Jul 2008
Location: Bangladesh
Posts: 1,254
Member: 821462
Status: Offline
Thanks Meter: 832
Remove FRP Success

Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM19)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.1.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi Note 4 [msm8953]
Software : AL1512-mido-build-20180531213711, V9.5.11.0.NCFMIFA [Thu May 31 21:37:09 WIB 2018]
Android Ver. : 7.0
Patch Level : 2018-05-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 4.1
  Reply With Quote
The Following 2 Users Say Thank You to sajid01913 For This Useful Post:
Old 05-27-2019, 13:18   #6994 (permalink)
No Life Poster
 
VIJAY2U2's Avatar
 
Join Date: Apr 2008
Location: India
Posts: 3,538
Member: 1039903
Status: Offline
Thanks Meter: 2,040
Arrow Karbonn Aura 1 Format Done

Code:
Operation	: Format FS
Checking for existing devices...Found
Port	: Qualcomm HS-USB QDLoader 9008 (COM10)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID	: E1B09000 [8936] 00000000
OPK_DATA	: 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [2]
Preparing Loader...Done
Sending Loader [8936_036]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware	: 8936, eMMC, 16 GB
LU Count	: 1 [0x01D5C000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device	: Karbonn Karbonn Aura 1 [msm8916]
Software	: UTLAura1v10046_22-09-2015, 588 [Tue Sep 22 19:59:34 CST 2015]
Android Ver.	: 5.0.2
Preparing Data...Done
Formatting Userdata...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 4.1
  Reply With Quote
The Following 2 Users Say Thank You to VIJAY2U2 For This Useful Post:
Old 05-27-2019, 15:33   #6995 (permalink)
Junior Member
 
Join Date: Apr 2013
Location: Patran, Punjab
Posts: 28
Member: 1923501
Status: Offline
Sonork: 100.1658355
Thanks Meter: 13
Vivo Y71 Pattern And FRP Remove One Click With UMT QcFire

Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM6)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4F FF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917_001]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8917, eMMC, 16 GB
LU Count : 1 [0x01D5A000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : vivo vivo 1724
Software : OPM1.171019.011 release-keys, eng.compil.20180718.194316 [Wed Jul 18 19:43:16 CST 2018]
Android Ver. : 8.1.0
Patch Level : 2018-06-01
Preparing Data...Done
Formatting Userdata...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 4.1
  Reply With Quote
The Following 2 Users Say Thank You to grvmtl35 For This Useful Post:
Old 05-27-2019, 16:29   #6996 (permalink)
No Life Poster
 
Join Date: Dec 2016
Location: .
Posts: 869
Member: 2659717
Status: Offline
Thanks Meter: 487
J120w frp done

Model : A310F
Operation : FRP Reset (Format UD)
Searching for Phone...Found
Port: : COM732 : SAMSUNG Mobile USB Modem #102
Checking for Device...Found [Normal Mode]
Reading Phone Information...OK
Model: : SM-J120W
IMEI: : 357116073507785
Software: : J120WVLU2AQA1/J120WOYA2AQA1/J120WVLU2AQA1/J120WVLU2AQA1
Product : SM-J120WZKAXAC
Init Download Mode...OK
Waiting for phone in Download Mode...OK
Port: : COM499 : SAMSUNG Mobile USB Modem #3
Reading Data from Phone...Done
Chipset : LSI3475 [HiSpeed]
Loading Data...Done
Sending Data...Done
Closing Session...Done
Operation Finished.
Elapsed Time 00:41
Module Ver. 0.2
LOG Saved to !Logs\190527_152047.log
  Reply With Quote
The Following 2 Users Say Thank You to mickeybrown026 For This Useful Post:
Old 05-28-2019, 06:24   #6997 (permalink)
No Life Poster
 
swapan's Avatar
 
Join Date: Aug 2006
Location: UAE
Posts: 2,377
Member: 330460
Status: Offline
Sonork: (Off Line)
Thanks Meter: 6,479
Smile Xiaomi-Redmi 3S Mi Account Remove Done

Xiaomi-Redmi 3S Mi Account Remove Done




  Reply With Quote
The Following 2 Users Say Thank You to swapan For This Useful Post:
Old 05-28-2019, 07:50   #6998 (permalink)
Junior Member
 
Join Date: Apr 2013
Location: Patran, Punjab
Posts: 28
Member: 1923501
Status: Offline
Sonork: 100.1658355
Thanks Meter: 13
10or E One Click Pattern+FRP Done By QcFire

Operation : Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM6)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1F00400 [8937] 01002015
OPK_DATA : 930E62DDD405C89FE66F4A9DF144449428E6ECE7BBEC5ACB29 30EE1B5EADD86B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_028]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8937, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : 10or E [msm8937]
Software : OPM1.171019.019 release-keys, 10or_E_V1_0_109 [Wed Jan 30 15:04:02 CST 2019]
Android Ver. : 8.1.0
Patch Level : 2019-02-01
Preparing Data...Done
Formatting Userdata...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 4.1
  Reply With Quote
The Following 2 Users Say Thank You to grvmtl35 For This Useful Post:
Old 05-29-2019, 12:43   #6999 (permalink)
Product Supporter
 
bk.gsm's Avatar
 
Join Date: Sep 2008
Location: UMT Support section
Age: 33
Posts: 3,756
Member: 869809
Status: Offline
Thanks Meter: 1,695
Redmi Note 5A mi account done

Code:
Operation	: Reset Mi Account
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port	: Qualcomm HS-USB QDLoader 9008 (COM192)
Driver Info	: Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID	: E1600500 [8917] 00000000
OPK_DATA	: 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware	: 8917, eMMC, 16 GB
LU Count	: 1 [0x01D5A000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device	: Xiaomi Redmi Note 5A [msm8937]
Software	: N2G47H, V10.2.1.0.NDFMIXM [Fri Jan 18 23:18:58 WIB 2019]
Android Ver.	: 7.1.2
Patch Level	: 2018-12-01
Resetting Mi Account Data...Done
Preparing Data...Done
Formatting Userdata...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------
New Firmware may cause hang on logo.
In such case, you need to flash phone to recover.
Or downgrade firmware and try Reset Mi Account again.
Operation Finished.
QcFire Ver. 4.2
b.r.
  Reply With Quote
The Following 2 Users Say Thank You to bk.gsm For This Useful Post:
Old 05-29-2019, 13:10   #7000 (permalink)
No Life Poster
 
rahul_rocks3's Avatar
 
Join Date: May 2010
Location: <:D-R-E-A-M-S:>
Posts: 2,814
Member: 1312746
Status: Offline
Thanks Meter: 766
VIVO Y91I RESET SUCCESSFULLY

Brand : Vivo
Model : Y91
Operation : Reset Locks (Vivo)
Qt: Untested Windows version 6.2 detected!
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek PreLoader USB VCOM (Android) (COM12)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Reading Device Information...
Brand : vivo
Manufacturer : vivo
Model : vivo 1820
Prod. Name : PD1818HF_EX
Device : PD1818HF_EX
Android Ver. : 8.1.0
Display ID : O11019 release-keys
Patch Level : 2019-04-05
Userdata is ENCRYPTED
Resetting Locks...
Reset done
--- IMPORTANT ---
- Disconnect phone and hold Volume UP + Power to enter Fastboot.
- Press Volume Down to select Recovery and press Power Button.
- Wait for phone to start.
[UltimateMTK Ver. 2.0]
  Reply With Quote
The Following 2 Users Say Thank You to rahul_rocks3 For This Useful Post:
Old 05-29-2019, 13:13   #7001 (permalink)
No Life Poster
 
rahul_rocks3's Avatar
 
Join Date: May 2010
Location: <:D-R-E-A-M-S:>
Posts: 2,814
Member: 1312746
Status: Offline
Thanks Meter: 766
GIONEE X1 FRP SUCCESSFUL

Brand : Gionee
Model : X1
Operation : Reset FRP
Qt: Untested Windows version 6.2 detected!
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek PreLoader USB VCOM (Android) (COM58)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Reading Device Information...
Brand : GIONEE
Manufacturer : GIONEE
Model : GIONEE X1
Prod. Name : X1
Device : GIONEE_SWW1631
Board : X1
Platform : mt6737t
Android Ver. : 7.0
Display ID : amigo4.0
Patch Level : 2017-06-05
Userdata is ENCRYPTED
Resetting FRP...
FRP Reset Done.
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 2.0]
  Reply With Quote
The Following 2 Users Say Thank You to rahul_rocks3 For This Useful Post:
Old 05-29-2019, 13:14   #7002 (permalink)
No Life Poster
 
rahul_rocks3's Avatar
 
Join Date: May 2010
Location: <:D-R-E-A-M-S:>
Posts: 2,814
Member: 1312746
Status: Offline
Thanks Meter: 766
GIONEE X1 FRP SUCCESSFUL

Brand : Gionee
Model : X1
Operation : Reset FRP
Qt: Untested Windows version 6.2 detected!
Waiting for Phone in BROM Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek PreLoader USB VCOM (Android) (COM58)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Reading Device Information...
Brand : GIONEE
Manufacturer : GIONEE
Model : GIONEE X1
Prod. Name : X1
Device : GIONEE_SWW1631
Board : X1
Platform : mt6737t
Android Ver. : 7.0
Display ID : amigo4.0
Patch Level : 2017-06-05
Userdata is ENCRYPTED
Resetting FRP...
FRP Reset Done.
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 2.0]
  Reply With Quote
The Following 2 Users Say Thank You to rahul_rocks3 For This Useful Post:
Old 05-29-2019, 14:43   #7003 (permalink)
No Life Poster
 
Akhtar Ali Jatt's Avatar
 
Join Date: Jan 2009
Location: Sindh Pakistan
Posts: 8,857
Member: 953334
Status: Offline
Sonork: 100.1614005
Thanks Meter: 15,419
Smile Samsung Galaxy Express Prime F.R.p Reset Done

Operation : Generic ADB FRP Reset
Searching for Device...Found
Brand : samsung
Model : SAMSUNG-SM-J320A
Product : j3xlteatt
Device : j3xlteatt
Andriod Ver. : 6.0.1
Patch Level : 2017-02-01
PDA : J320AUEU2AQB1
Bootloader : FA60_J320AUEU2APJ1
Build ID : MMB29K.J320AUEU2AQB1
Build Date : Wed Feb 15 14:08:59 KST 2017
Resetting FRP Lock...Done
Operation Finished.
UltimateFRP Ver. 0.5
  Reply With Quote
The Following 2 Users Say Thank You to Akhtar Ali Jatt For This Useful Post:
Old 05-29-2019, 14:58   #7004 (permalink)
No Life Poster
 
Join Date: Aug 2014
Posts: 658
Member: 2233266
Status: Offline
Thanks Meter: 252
Operation : Reset Mi Account
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM161)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi Note 4 [msm8953]
Software : AL1512-mido-build-20190128095656, V10.2.3.0.NCFMIXM [Mon Jan 28 09:56:54 WIB 2019]
Android Ver. : 7.0
Patch Level : 2018-12-01
Resetting Mi Account Data...Done
Preparing Data...Done
Formatting Userdata...Done
When phone is completely ON, connect to Internet and add Mi Account.
-------------- INFORMATION --------------
New Firmware may cause hang on logo.
In such case, you need to flash phone to recover.
Or downgrade firmware and try Reset Mi Account again.
Operation Finished.
QcFire Ver. 4.0
  Reply With Quote
The Following 2 Users Say Thank You to Yahia_Sb For This Useful Post:
Old 05-29-2019, 14:59   #7005 (permalink)
No Life Poster
 
Join Date: Aug 2014
Posts: 658
Member: 2233266
Status: Offline
Thanks Meter: 252
Operation : Mi Anti Relock
Checking for device in ADB mode...Found!
Searching for Device...Found
Brand : xiaomi
Model : Redmi Note 4
Product : mido
Device : mido
Andriod Ver. : 7.0
Patch Level : 2018-12-01
Bootloader : unknown
Build ID : AL1512-mido-build-20190128095656
Build Date : Mon Jan 28 09:56:54 WIB 2019
Disabling Mi Account Relock...Verified OK... Done
Operation Finished.
QcFire Ver. 4.0
  Reply With Quote
The Following 2 Users Say Thank You to Yahia_Sb For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 01:27.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.31056 seconds with 9 queries

SEO by vBSEO