GSM-Forum
Page 3 of 809 12 3 4561353103503 Last »
Show 50 post(s) from this thread on one page

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Ultimate Multi Tool Box (https://forum.gsmhosting.com/vbb/f970/)
-   -   ★★★ Post Here All Successfully Repaired Phones by Ultimate Multi Tool ★★★ (https://forum.gsmhosting.com/vbb/f970/post-here-all-successfully-repaired-phones-ultimate-multi-tool-1996423/)

yusufali786 10-06-2015 08:55
ZTE s100 Read Info

Port : COM130 : ZTE CDMA Handset Diagnostics Interface (COM130)
Baud Rate : 921600
Device : ZTE S100
Operation : Read Info
Opening Port... OK
Reading Information... OK
Compile : Aug 17 2009 12:59:11
Release : Oct 24 2006 13:00:00
Hw Ver. : MTS_S100
ESN : 80C259A7
MEID : A100004744BCD1
Unlocking Security... OK
Build : QSC6010-SCNRZ-MTS_S100_RBTL40NV1.0.0B04
Unexpected reply from phone!
Soft Ver.
Detected : S100
User Code : 0000
Port Closed.
Operation Finished.
Time Taken: 00:01
Module Ver. [1.0]

Unlocking..................


Port : COM130 : ZTE CDMA Handset Diagnostics Interface (COM130)
Baud Rate : 921600
Device : ZTE S100
Operation : Unlock
Opening Port... OK
Reading Information... OK
Compile : Aug 17 2009 12:59:11
Release : Oct 24 2006 13:00:00
Hw Ver. : MTS_S100
ESN : 80C259A7
MEID : A100004744BCD1
Unlocking Security... OK
Build : QSC6010-SCNRZ-MTS_S100_RBTL40NV1.0.0B04
Unexpected reply from phone!
Soft Ver.
Detected : S100
User Code : 0000
Checking if Supported for Unlock... OK
Switching to Offline... OK
Sending Default SPC... OK
Unlocking Phone... OK
Resetting Phone... OK
Port Closed.
Operation Finished.
Time Taken: 00:02
Module Ver. [1.0]

yusufali786 10-06-2015 13:51
lg 3520 successfully unlock.......................


Port : COM151 : LGE CDMA USB Serial Port (COM151)
Baud Rate : 38400 - Auto
Device : LG TS3520
Operation : Unlock
Opening Port... OK
Reading Information... OK
Compile : Apr 23 2010 00:51:52
Release : Apr 23 2010 23:59:00
Hw Ver. : TS352F08
ESN : 80CxXXXX
MEID : A0000021XXXXXXX
Model : TS3520
Software : F08
Preparing Data... OK
Setting Offline Mode... OK
Security Unlock... OK
Setting Download Mode... OK
Preparing Bootloader... OK
Sending Bootloader... OK
Executing Bootloader... OK
Erasing Flash Memory... OK
Erasing Flash Memory... OK
Writing Flash Memory... OK
Writing Flash Memory... OK
Resetting Phone... OK
Port closed.
Operation Finished.
Time Taken: 00:29
Module Ver. [1.0]
Log Saved to Logs\151006_174739.log

rehmani 10-07-2015 06:47
zte s100 unlock done
 
Code:
Port    : COM71 : ZTE CDMA Handset Diagnostics Interface (COM71)
Baud Rate    : 921600
Device    : ZTE S100
Operation    : Unlock
Opening Port... OK
Reading Information... OK
Compile    : Jul 06 2010 21:17:17
Release    : Oct 24 2006 13:00:00
Hw Ver.    : MTS_S100
ESN    : 8093Fxxx
MEID    : A1000040xxxxxx
Unlocking Security... OK
Build    : QSC6010-SCNRZ-MTS_S100_RBTL40NV1.0.1B02
Unexpected reply from phone!
Soft Ver.
Detected    : S100
User Code    : 0000
Checking if Supported for Unlock... OK
Switching to Offline... OK
Sending Default SPC... OK
Unlocking Phone... OK
Resetting Phone... OK
Port Closed.
Operation Finished.
Time Taken: 00:02
Module Ver. [1.0]
Log Saved to Logs\151007_111216.log

gsm_links 10-07-2015 06:58
MTS 131 Unlock Done by Ultimate Multi Tool!!!
 
http://i60.tinypic.com/11jxbvd.jpg





Regards

yusufali786 10-07-2015 08:08
Lg 3610 successfully unlocked...........


Port : COM153 : LGE CDMA USB Serial Port (COM153)
Baud Rate : 38400 - Auto
Device : LG RD3610
Operation : Unlock
Opening Port... OK
Reading Information... OK
Compile : Sep 02 2008 14:59:32
Release : Sep 02 2008 24:00:00
Hw Ver. : RD361F02
ESN : 80A9XXXX
MEID : A00000103XXXX
Model : RD3610
Software : F02
Preparing Data... OK
Setting Offline Mode... OK
Security Unlock... OK
Setting Download Mode... OK
Preparing Bootloader... OK
Sending Bootloader... OK
Executing Bootloader... OK
Erasing Flash Memory... OK
Erasing Flash Memory... OK
Writing Flash Memory... OK
Writing Flash Memory... OK
Resetting Phone... OK
Port closed.
Operation Finished.
Time Taken: 01:26
Module Ver. [1.0]
Log Saved to Logs\151007_122820.log

rehmani 10-07-2015 12:40
samsung b229 unlock done
 
Code:
Port    : COM58 : Easy Jtag Control Port (COM58)
Baud Rate    : 9600 [Auto]
Device    : Samsung B229
Operation    : Unlock
Opening Port... OK
Setting Test Mode... OK
Step 1... OK
Step 2... OK
Step 3...
Resetting Phone... OK
Port Closed.
Operation Finished.
Time Taken: 00:03
Module Ver. [1.0]
Log Saved to Logs\151007_143506.log

rehmani 10-07-2015 12:42
lima tab 601 pattern reset done
 
Code:
Port    : ADB Interface
Baud Rate    : Not Applicable
Device    : Android
Operation    : Remove Locks
Searching for Device... Found
Model    : Tx-601
Version    : 4.0.4
Hardware    : sun5i
Baseband    : I50A-MX-CM.BT.FM-H02-V08-U99.
SIM Card    : ABSENT
CPU    : armeabi-v7a
IMEI 1    : 9112555500xxxxx
IMEI 2    : Empty
Checking Root Access... OK
Root    : Rooted
Removing Google Locks... OK
Please Restart Device.
Operation Finished.
Elapsed Time: 00:02
Module Ver. [1.0]

rehmani 10-07-2015 12:44
zte c330 repair meid done
 
Code:
Port    : COM14 : Prolific USB-to-Serial Comm Port (COM14)
Baud Rate    : 115200
Device    : S100
Operation    : Write MEID
Opening Port... OK
Reading Information...
Compile    : Sep 04 2008 18:47:57
Release    : Oct 24 2006 13:00:00
Hw Ver.    : Shyam_C3
ESN    : 00000000
MEID    : 00000000000000
Auto Detection is Disabled!
Unlocking Security... Failed
Build    : QSC6010-SCNRZ-Shyam_C330_RBTL37NV1.0.0B02
Unexpected reply from phone!
Software
Detected    : Shyam_C3
User Code    : 0000
Writing MEID A100004A4xxxxx... OK
New ESN    : 804Exxxx
New MEID    : A100004A4xxxxx
Port Closed.
Operation Finished.
Time Taken: 00:02
Module Ver. [1.0]
Log Saved to Logs\151007_171332.log

yusufali786 10-07-2015 13:11
zte m131 flash successfully

Port : COM162 : ZTE CDMA Handset Diagnostics Interface (COM162)
Baud Rate : 921600
Device : ZTE M131
Operation : Flash
Opening Port... OK
Reading Information... OK
Compile : Nov 26 2014 14:22:47
Release : Apr 24 2009 24:00:00
Hw Ver. : V.MTS.M1
ESN : 80A12159
MEID : A100001A4896FB
Unlocking Security... OK
Build : V.MTS.M131.B08
Soft Ver. : SSTL_S183_FM_RBTL40NV1.0.0B12
Detected : M131
User Code : 0000
Setting Download Mode... OK
Waiting for Reconnect... OK
Initializing Flash Chip... OK
Flash Chip : SPANSION S71VS128RC0
Chip Size : 16 MB
Firmware : ZTE-M131-V.MTS.M131.B04.bin
Fw. Size : 16 MB
Writing Firmware... OK
Resetting Phone... OK
Port Closed.
Operation Finished
Time Taken: 07:24
Module Ver. [1.0]

after flash repair security

Port : COM162 : ZTE CDMA Handset Diagnostics Interface (COM162)
Baud Rate : 921600
Device : M131
Operation : Write MEID
Opening Port... OK
Reading Information...
Compile : Apr 24 2014 22:06:45
Release : Apr 24 2009 24:00:00
Hw Ver. : V.MTS.M1
ESN : 00000000
MEID : 00000000000000
Unlocking Security... OK
Build : V.MTS.M131.B04
Software : SSTL_S183_FM_RBTL40NV1.0.0B03
Detected : M131
User Code : 0000
Writing MEID A100001A4896FB... OK
New ESN : 80A12159
New MEID : A100001A4896FB
Port Closed.
Operation Finished.
Time Taken: 00:01
Module Ver. [1.0]
Log Saved to Logs\151007_173837.log

yusufali786 10-07-2015 15:19
zte s100 unlock successfully


Port : COM130 : ZTE CDMA Handset Diagnostics Interface (COM130)
Baud Rate : 921600
Device : ZTE S100
Operation : Unlock
Opening Port... OK
Reading Information... OK
Compile : Sep 21 2010 09:45:02
Release : Oct 24 2006 13:00:00
Hw Ver. : MTS_S100
ESN : 8086XXXX
MEID : 00000000A00000
Unlocking Security... OK
Build : QSC6010-SCNRZ-MTS_S100_RBTL40NV1.0.3B02
Read Not Supported
Soft Ver.
Detected : S100
User Code : 0000
Checking if Supported for Unlock... OK
Switching to Offline... OK
Sending Default SPC... OK
Unlocking Phone... OK
Resetting Phone... OK
Port Closed.
Operation Finished.
Time Taken: 00:02
Module Ver. [1.1]

rehmani 10-08-2015 12:13
samsung b189 read user code done
 
Code:
Port    : COM24 : SAMSUNG Mobile Modem
Baud Rate    : 921600
Device    : Samsung B259
Operation    : Read Info
Opening Port... OK
Reading Information... OK
Compile    : Apr 24 2009 16:25:56
Release    : Feb 14 2008 07:00:00
Hw Ver.    : SCH-B189
ESN    : 804Cxxxx
MEID    : A10000473xxxxx
Executing Security Unlock... OK
Sending SPC (000000)... OK
User Code    : 6657
Port Closed.
Time Taken: 00:03
Module Ver. [1.0]
Log Saved to Logs\151008_161414.log

rehmani 10-08-2015 12:15
jivi c300 user password read done
 
Code:
Port    : COM68 : CDMA USB Diagnostics Interface (COM68)
Baud Rate    : 921600
Device    : Haier C2030
Operation    : Read Info
Opening Port... OK
Reading Information... OK
Compile    : Nov 15 2013 19:45:59
Release    : May 06 2008 07:00:00
Hw Ver.    : L665_7_I
ESN    : 80F6xxxxx
MEID    : A4444444444444
BUILD    : QSC6010-L665_7_IND-3550
Reading Extended Information... OK
User Code    : 0987
SPC    : 000000
Port Closed.
Operation Finished.
Time Taken: 00:01
Module Ver. [1.0]
Log Saved to Logs\151008_164525.log

rehmani 10-08-2015 12:19
huawei c2856 fs.pm.log recover
 
Code:
Analyzing File...
EFS File    : cefs_modem.mbn
CHECKING SMARTCARD[OK].
Port    : COM9 : HUAWEI CDMA Handset - NMEA (COM9)
Baud Rate    : 921600
Device    : Huawei C2856
Operation    : Write APP/EFS
Opening Port... OK
Preparing Phone... OK
Authorizing Download... OK
Finalizing Process... OK
EFS File    : cefs_modem.mbn
Fw. Size    : 1.94 MB
Determining EFS Region Size... OK
Erasing EFS Region... OK
Writing EFS region... OK
Resetting Phone... OK
Port Closed.
Operation Finished.
Time Taken: 03:35
Module Ver. [1.0]
Log Saved to Logs\151008_164900.log

yusufali786 10-08-2015 13:26
Zte s100 flash ok

Port : COM130 : ZTE CDMA Handset Diagnostics Interface (COM130)
Baud Rate : 921600
Device : ZTE S100
Operation : Flash
Opening Port... OK
Reading Information... OK
Compile : Aug 10 2009 18:56:15
Release : Oct 24 2006 13:00:00
Hw Ver. : TM_S100_
ESN : A7B404AA
MEID : 00000000000000
Unlocking Security... OK
Build : QSC6010-SCNRZ-TM_S100_RBTL35NV1.0.0B04
Read Not Supported
Soft Ver.
Detected : S100
User Code : 0000
Setting Download Mode... OK
Preparing Phone... OK
Sending Bootloader... OK
Initializing Bootloader... OK
Initializing Flash Chip... OK
Flash Chip : SAMSUNG K5L6331CA
Chip Size : 8 MB
Firmware : 100 unlock dump.bin
Fw. Size : 8 MB
Writing Firmware... OK
Resetting Phone... OK
Port Closed.
Operation Finished
Time Taken: 03:33
Module Ver. [1.1]

yusufali786 10-08-2015 13:27
Zte s183 1 click unlock ok

Port : COM148 : ZTE CDMA Handset Diagnostics Interface (COM148)
Baud Rate : 921600
Device : ZTE S183
Operation : Unlock
Opening Port... OK
Reading Information... OK
Compile : Nov 27 2013 15:03:05
Release : Apr 24 2009 24:00:00
Hw Ver. : RIC_S183
ESN : 80AXXXXX
MEID : A000003XXXXX
Unlocking Security... OK
Build : RIC_S183_RBTL21FV1.0.0B07
Soft Ver. : RIC_S183_NL_RBTL21FV1.0.0B09
Detected : S183
User Code : 0000
Checking if Supported for Unlock... OK
Setting Download Mode... OK
Waiting for Reconnect... OK
Initializing Flash Chip... OK
Flash Chip : SPANSION S71VS128RC0
Chip Size : 16 MB
Unlocking Phone... OK
Resetting Phone... OK
Port Closed.
Operation Finished.
Time Taken: 00:15
Module Ver. [1.1]


All times are GMT +1. The time now is 07:31.
Page 3 of 809 12 3 4561353103503 Last »
Show 50 post(s) from this thread on one page


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.34422 seconds with 6 queries

SEO by vBSEO