★★★ Post Here All Successfully Repaired Phones by Ultimate Multi Tool ★★★ - Page 146 - GSM-Forum

jitubhati20 · 02-25-2017, 15:13

sm j200h format done

cellncare · 02-25-2017, 17:38

Device: SM-J210F
Operation: Apply FRP Patch
Port: COM25 : SAMSUNG Mobile USB Modem
Checking for Device... Found [Download Mode]
Reading Data from Phone... Done
Chipset: SPRD8735 [HiSpeed]
Applying Patch Data... . . . . . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Please install driver once SAMSUNG_Android Device is detected.
Once ADB Drivers are installed, use Reset FRP button.
Elapsed Time: 00:18
[Ultimate Samsung Flasher v0.9]
Device: SM-J210F
Operation: Reset FRP
Searching for Device... Found
Model: SM-J210F
Baseband: J210FXXU0APF8
Bootloader: J210FXXU0APF1
PDA: J210FXXU0APH2
Android Version: 6.0.1
Resetting FRP Lock... Done
---------------- IMPORTANT ----------------
Tap Next > Next > Accept Agreement on phone to enter Home Screen.
Goto Menu > Settings > Backup and Reset > Factory data reset.
Operation Finished.
Elapsed Time: 00:09
[Ultimate Samsung Flasher v0.9]

mr.luckytarun · 02-25-2017, 17:41

SM-J210F FRP REMOVE DONE

mobile_hotman · 02-25-2017, 17:45

FIRST IN THE FORUM

MOTOROLA_NEXUS6_XT1103_SUCCESSFULL_FLASHING BY GR8 UMT BOX

Quote:

port : Fastboot interface
baud rate : Not applicable
device : Motorola qc
operation : Flash
fw model : Shamu
fw version : Shamu-user 6.0 mra58x 2353551 release-keysmdm9625_104662.22.05.30r
searching for device in fastboot mode... Ok
reading phone information...
model : Xt1103
boot ver. : Moto-apq8084-71.10
baseband : D4.0-9625-02.101
software : None
imei : 3xxxxxxxxxxx
cpu : Apq8084 es1.1
ram : 3072mb samsung s8 sdram die=6gb
emmc : 32gb sandisk rev=07 prv=01 type=57
sending data [motoboot]... Done
sending data [radio]... Done
sending data [boot]... Done
sending data [recovery]... Done
sending data [system]... Done
sending data [system]... Done
sending data [system]... Done
sending data [system]... Done
sending data [system]... Done
sending data [system]... Done
sending data [system]... Done
sending data [system]... Done
sending data [cache]... Done
sending data [oem]... Done
operation finished.
Elapsed time: 02:28
[module ver. 3.4]

PS: Other Tools Failed

BR

Taguro-GSMLover · 02-26-2017, 04:23

Log:

Device: SM-J710F
Operation: Reset FRP
Searching for Device... Found
Model: SM-J710F
Baseband: J710FXXU1APCD
Bootloader: J710FXXU1APD7
PDA: J710FXXU1APD7
Android Version: 6.0.1
Resetting FRP Lock... Done
---------------- IMPORTANT ----------------
Tap Next > Next > Accept Agreement on phone to enter Home Screen.
Goto Menu > Settings > Backup and Reset > Factory data reset.
Operation Finished.
Elapsed Time: 00:06
[Ultimate Samsung Flasher v0.9]

rehmani · 02-26-2017, 12:29

zte mts m131 write efs, repair security and unlock done

Code:

Port    : COM70 : ZTE CDMA Handset Diagnostics Interface (COM70)
Baud Rate    : 921600
Device    : ZTE M131
Operation    : Flash EFS
Opening Port... OK
Reading Information... OK
Compile    : Nov 26 2014 14:22:47
Release    : Apr 24 2009 24:00:00
Hw Ver.    : V.MTS.M1
ESN    : 00000000
MEID    : 00000000000000
Unlocking Security... OK
Build    : V.MTS.M131.B08
Soft Ver.    : SSTL_S183_FM_RBTL40NV1.0.0B12
Detected    : M131
User Code    : 0000
Setting Download Mode... OK
Waiting for Reconnect... OK
Initializing Flash Chip... OK
Flash Chip    : SPANSION S71VS128RC0
Chip Size    : 16 MB
Firmware    : ZTE-M131-V.MTS.M131.B04.bin
Fw. Size    : 16 MB
Writing EFS Area... OK
Resetting Phone... OK
Port Closed.
Operation Finished.
Time Taken: 02:55
Module Ver. [1.6]
Error Saving Log File!

Code:

Port    : COM70 : ZTE CDMA Handset Diagnostics Interface (COM70)
Baud Rate    : 921600
Device    : M131
Operation    : Write MEID
Opening Port... OK
Reading Information...
Compile    : Nov 26 2014 14:22:47
Release    : Apr 24 2009 24:00:00
Hw Ver.    : V.MTS.M1
ESN    : 00000000
MEID    : 00000000000000
Unlocking Security... OK
Build    : V.MTS.M131.B08
Software    : SSTL_S183_FM_RBTL40NV1.0.0B12
Detected    : M131
User Code    : 0000
Writing MEID A000004E48F---... OK
New ESN    : 809465--
New MEID    : A000004E48F---
Port Closed.
Operation Finished.
Time Taken: 00:05
Module Ver. [1.6]
Error Saving Log File!

Code:

Port    : COM70 : ZTE CDMA Handset Diagnostics Interface (COM70)
Baud Rate    : 921600
Device    : ZTE M131
Operation    : Unlock
Opening Port... OK
Reading Information... OK
Compile    : Nov 26 2014 14:22:47
Release    : Apr 24 2009 24:00:00
Hw Ver.    : V.MTS.M1
ESN    : 809465--
MEID    : A000004E48F---
Unlocking Security... OK
Build    : V.MTS.M131.B08
Soft Ver.    : SSTL_S183_FM_RBTL40NV1.0.0B12
Detected    : M131
User Code    : 0000
Checking if Supported for Unlock... OK
Setting Offline Mode... OK
Unlocking Phone... OK
Resetting Phone... OK
Port Closed.
Operation Finished.
Time Taken: 00:08
Module Ver. [1.6]
Error Saving Log File!

miftahulbari · 02-27-2017, 07:55

samsung j700f latest security 1/2017 frp reset done...

Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM39 : SAMSUNG Mobile USB Modem #12
Checking for Device... Found [Normal Mode]
Reading Phone Information... OK
Model: SM-J700F
IMEI: 358425077921002
Software: J700FXXU3BQA2/J700FODD3BPJ2/J700FXXU3BQA1/J700FXXU3BQA2
Init Download Mode... OK
Port: COM5 : SAMSUNG Mobile USB Modem #2
Reading Data from Phone... Done
Chipset: LSI7580 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Once Phone is completely ON, wait a few minutes and then.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Elapsed Time: 01:16
[Ultimate Samsung Flasher v0.9]

nickname078 · 02-27-2017, 08:58

LYF_LS5504 FRP REMOVE WITH QCFIRE BY GREAT UMT

Operation : Boot
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM43)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.1.2
Connecting to phone... OK
Waiting for response... OK
Init Handshake Sequence... OK
Hardware ID : E1B09000 [8936] [00000000]
Initializing Protocol... OK
Preparing Firehose Loader... Done
Sending Firehose Loader... Done
Executing Loader... OK
Hardware : 8936, eMMC, 16 GB
Warning! High Speed Driver not installed.
Please install driver from QcFire\Drivers folder.
Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table... OK
Reading Device Information... OK
Device : LYF LS-5504 [msm8916]
Software : LYF_LS5504_1.18, LS-5504_J150_20160927.215225 [Tue Sep 27 21:55:42 CST 2016]
Android Ver. : 5.1.1
Resetting FRP Lock... . . . Done
Remove cable, reconnect battery / hold Power Button ~15 seconds.

.::THE ROCK::. · 02-27-2017, 10:03

Port : COM10 : SAMSUNG Mobile USB Modem #5
Baud Rate : 115200
Device : Samsung 01F
Operation : Remove Locks (AT)
Opening Port... OK
Reading Information... OK
Model : GT-I9100G
IMEI : 35747404++++++
Version Info : I9100GDDLS3
: I9100GODDLS3
: I9100GDDLS2
: I9100GDDLS3
Checking Device Compatibility... OK
Preparing Device... OK
Removing Locks, Please Wait... OK
Enter Any Pattern/Code to Unlock Screen.
Goto Settings and Set Screen Lock to None.
Port Closed.
Operation Finished.
Elapsed Time: 00:17
[Module Ver. 3.4]
Log Saved to Logs\170227_140822.log

nickname078 · 02-27-2017, 16:37

SAMSUNG G531F FRP REMOVE BY OLD METHOD WITH UMT
Operation: Reset FRP / RL / EE
Port: COM10 : SAMSUNG Mobile USB Modem #3
Checking for Device... Found [Normal Mode]
Reading Phone Information... OK
Model: SM-G531F
IMEI: 35526107******
Software: G531FDDU1APJ2/G531FODD1APJ2/G531FDDU1APJ2/G531FDDU1APJ2
Init Download Mode... OK
Port: COM8 : SAMSUNG Mobile USB Modem
Reading Data from Phone... Done
Chipset: PXA1L88 [HiSpeed]
Resetting FRP Lock Data... Done
Elapsed Time: 00:48
[Ultimate Samsung Flasher v0.9]

nickname078 · 02-28-2017, 08:40

lava A59 frp remove with spd frp reset With UMT

Port : Fastboot Interface
Baud Rate : Not Applicable
Device : Generic
Operation : Huawei SPD FRP Reset
Searching for Device in FastBoot Mode... OK
Reading Information... OK
FastBoot Ver. : 1.0
Product
Bootloader : Locked
Bootloader is Locked. FRP Reset may fail!
Removing FRP Lock... Done
Operation Finished.
Elapsed Time: 00:14
[Module Ver. 3.4]
Log Saved to Logs\170228_130742.log

.::THE ROCK::. · 02-28-2017, 10:26

Port : ADB Interface
Baud Rate : Not Applicable
Device : Android
Operation : Anti-Malware
Searching for Device... Found
Model : S7
Version : 5.1
Hardware : mt6572
Baseband : MOLY.WR8.W1315.MD.WG.MP.V4, 2016/04/20 14:01
SIM Card : READY
CPU : armeabi-v7a
Type : GSM
IMEI(1) : 3566880++++++++
Type : GSM
IMEI(2) : 35668800+++++++
Checking Root Access... OK
Root : Rooted
Loading Detection Data... OK
Scanning for Malware/Suspicious Files... OK
Files Found : 5
Removing Malware/Suspicious Data... Done
Rebooting Device to Recovery... OK
We recommend wiping Userdata from recovery.
Operation Finished.
Elapsed Time: 02:55
[Module Ver. 3.5]
Log Saved to Logs\170228_145141.log

.::THE ROCK::. · 02-28-2017, 14:07

Code:

Searching for phone in sideload mode... Found
Device Id    : kenzo_global
Version    : V8.1.1.0.MHOMIDI
Code Base    : 6.0.1
Ext Info    : GB, en, F
Formatting Data... Done
Operation Finished.

Code:

Operation    : Mi Account Reset 2
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM36)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.1.0
Connecting to phone... OK
Waiting for response... Ignored
Init Handshake Sequence... OK
Hardware ID    : E1009B00 [8976] [00000000]
Initializing Protocol... OK
Preparing Firehose Loader... Done
Sending Firehose Loader... Done
Executing Loader... OK
Hardware    : 8976, eMMC, 32 GB
Warning! High Speed Driver not installed.
Please install driver from QcFire\Drivers folder.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table... OK
Reading Data... Done
Resetting Mi Account... Done
Operation Finished.
Remove cable, reconnect battery / hold Power Button ~15 seconds.

.::THE ROCK::. · 02-28-2017, 15:23

FORMAT PAATERN UNLOCK

Code:

Operation    : Format FS
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM36)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.1.0
Connecting to phone... OK
Waiting for response... OK
Init Handshake Sequence... OK
Hardware ID    : E1507000 [8916] [00000000]
Initializing Protocol... OK
Preparing Firehose Loader... Done
Sending Firehose Loader... Done
Executing Loader... OK
Hardware    : 8916, eMMC, 16 GB
Warning! High Speed Driver not installed.
Please install driver from QcFire\Drivers folder.
Payload Info    : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table... OK
Preparing Data... Done
Formatting Userdata... Done
Operation Finished.
Remove cable, reconnect battery / hold Power Button ~15 seconds.

FRP DONE

Code:

Operation    : Boot
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM36)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.1.0
Connecting to phone... OK
Waiting for response... OK
Init Handshake Sequence... OK
Hardware ID    : E1507000 [8916] [00000000]
Initializing Protocol... OK
Preparing Firehose Loader... Done
Sending Firehose Loader... Done
Executing Loader... OK
Hardware    : 8916, eMMC, 16 GB
Warning! High Speed Driver not installed.
Please install driver from QcFire\Drivers folder.
Payload Info    : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table... OK
Reading Device Information... OK
Device    : OPPO A37f [msm8916]
Software    : A37fEX_11_170110, eng.root.20170110.092421 [Tue Jan 10 09:25:51 CST 2017]
Android Ver.    : 5.1.1
Resetting FRP Lock... . . . Done
Remove cable, reconnect battery / hold Power Button ~15 seconds.

nickname078 · 02-28-2017, 15:30

LYF_LS-4503 FRP REMOVE WITH QCFIRE BY GREAT UMT
Operation : Boot
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM23)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Connecting to phone... OK
Waiting for response... OK
Init Handshake Sequence... OK
Hardware ID : E1009600 [8909] [00000000]
Initializing Protocol... OK
Preparing Firehose Loader... Done
Sending Firehose Loader... Done
Executing Loader... OK
Hardware : 8909, eMMC, 8 GB
Warning! High Speed Driver not installed.
Please install driver from QcFire\Drivers folder.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table... OK
Reading Device Information... OK
Device : LYF LS-4503 [msm8909]
Software : LS-4503-S10A_LYF_L11EN_210_160115, 13bb2fe [Fri Sep 30 18:29:38 CST 2016]
Android Ver. : 5.1.1
Resetting FRP Lock... . . . Done
Remove cable, reconnect battery / hold Power Button ~15 seconds.

02-25-2017, 17:38	#2177 (permalink)
cellncare Freak Poster Join Date: Dec 2005 Age: 47 Posts: 240 Member: 205157 Status: Offline Sonork: 100.1574537 Thanks Meter: 82	J210F 6.0.1 FRP Reset Done By UMT (UFD) Method In Secs Nice Update Device: SM-J210F Operation: Apply FRP Patch Port: COM25 : SAMSUNG Mobile USB Modem Checking for Device... Found [Download Mode] Reading Data from Phone... Done Chipset: SPRD8735 [HiSpeed] Applying Patch Data... . . . . . Done Closing Session... Done ---------------- IMPORTANT ---------------- Wait for phone to reboot and turn on fully or TURN ON manually. Please install driver once SAMSUNG_Android Device is detected. Once ADB Drivers are installed, use Reset FRP button. Elapsed Time: 00:18 [Ultimate Samsung Flasher v0.9] Device: SM-J210F Operation: Reset FRP Searching for Device... Found Model: SM-J210F Baseband: J210FXXU0APF8 Bootloader: J210FXXU0APF1 PDA: J210FXXU0APH2 Android Version: 6.0.1 Resetting FRP Lock... Done ---------------- IMPORTANT ---------------- Tap Next > Next > Accept Agreement on phone to enter Home Screen. Goto Menu > Settings > Backup and Reset > Factory data reset. Operation Finished. Elapsed Time: 00:09 [Ultimate Samsung Flasher v0.9]

02-26-2017, 04:23	#2180 (permalink)
Taguro-GSMLover No Life Poster Join Date: Jan 2017 Location: Soul Society Posts: 581 Member: 2669319 Status: Offline Thanks Meter: 421	Sm-j710f frp reset done Log: Device: SM-J710F Operation: Reset FRP Searching for Device... Found Model: SM-J710F Baseband: J710FXXU1APCD Bootloader: J710FXXU1APD7 PDA: J710FXXU1APD7 Android Version: 6.0.1 Resetting FRP Lock... Done ---------------- IMPORTANT ---------------- Tap Next > Next > Accept Agreement on phone to enter Home Screen. Goto Menu > Settings > Backup and Reset > Factory data reset. Operation Finished. Elapsed Time: 00:06 [Ultimate Samsung Flasher v0.9]

02-27-2017, 10:03	#2184 (permalink)
.::THE ROCK::. Product Supporter Join Date: Jul 2011 Location: ISLAMIC & INDIA WITH MIRACLE T Age: 37 Posts: 5,807 Member: 1617868 Status: Offline Sonork: 100.1625996 Thanks Meter: 2,028	SAMSUNG GT-I9100G Remove Locks (AT) Port : COM10 : SAMSUNG Mobile USB Modem #5 Baud Rate : 115200 Device : Samsung 01F Operation : Remove Locks (AT) Opening Port... OK Reading Information... OK Model : GT-I9100G IMEI : 35747404++++++ Version Info : I9100GDDLS3 : I9100GODDLS3 : I9100GDDLS2 : I9100GDDLS3 Checking Device Compatibility... OK Preparing Device... OK Removing Locks, Please Wait... OK Enter Any Pattern/Code to Unlock Screen. Goto Settings and Set Screen Lock to None. Port Closed. Operation Finished. Elapsed Time: 00:17 [Module Ver. 3.4] Log Saved to Logs\170227_140822.log

02-28-2017, 10:26	#2187 (permalink)
.::THE ROCK::. Product Supporter Join Date: Jul 2011 Location: ISLAMIC & INDIA WITH MIRACLE T Age: 37 Posts: 5,807 Member: 1617868 Status: Offline Sonork: 100.1625996 Thanks Meter: 2,028	PUNCHER S7 Removing Malware/Suspicious Data... Done Port : ADB Interface Baud Rate : Not Applicable Device : Android Operation : Anti-Malware Searching for Device... Found Model : S7 Version : 5.1 Hardware : mt6572 Baseband : MOLY.WR8.W1315.MD.WG.MP.V4, 2016/04/20 14:01 SIM Card : READY CPU : armeabi-v7a Type : GSM IMEI(1) : 3566880++++++++ Type : GSM IMEI(2) : 35668800+++++++ Checking Root Access... OK Root : Rooted Loading Detection Data... OK Scanning for Malware/Suspicious Files... OK Files Found : 5 Removing Malware/Suspicious Data... Done Rebooting Device to Recovery... OK We recommend wiping Userdata from recovery. Operation Finished. Elapsed Time: 02:55 [Module Ver. 3.5] Log Saved to Logs\170228_145141.log

02-25-2017, 15:13	#2176 (permalink)
jitubhati20 Freak Poster Join Date: Nov 2011 Location: India Age: 34 Posts: 139 Member: 1682257 Status: Offline Thanks Meter: 60	sm j200h format done

02-25-2017, 17:41	#2178 (permalink)
mr.luckytarun No Life Poster Join Date: Dec 2009 Location: INDIA Age: 36 Posts: 3,135 Member: 1195083 Status: Offline Sonork: QQ:3208821449 Thanks Meter: 1,348	SM-J210F FRP REMOVE DONE

02-27-2017, 07:55	#2182 (permalink)
miftahulbari No Life Poster Join Date: Jan 2014 Location: gsmforum Posts: 725 Member: 2118052 Status: Offline Thanks Meter: 568	samsung j700f latest security 1/2017 frp reset done... Device: Samsung Device Operation: Reset FRP (New Method) Port: COM39 : SAMSUNG Mobile USB Modem #12 Checking for Device... Found [Normal Mode] Reading Phone Information... OK Model: SM-J700F IMEI: 358425077921002 Software: J700FXXU3BQA2/J700FODD3BPJ2/J700FXXU3BQA1/J700FXXU3BQA2 Init Download Mode... OK Port: COM5 : SAMSUNG Mobile USB Modem #2 Reading Data from Phone... Done Chipset: LSI7580 [HiSpeed] Resetting FRP Lock Data... . Done Closing Session... Done ---------------- IMPORTANT ---------------- Wait for phone to reboot and turn on fully or TURN ON manually. Once Phone is completely ON, wait a few minutes and then. goto Menu > Settings > Backup and Reset and do Factory data Reset. Elapsed Time: 01:16 [Ultimate Samsung Flasher v0.9]

02-27-2017, 08:58	#2183 (permalink)
nickname078 Freak Poster Join Date: Feb 2008 Posts: 139 Member: 697211 Status: Offline Thanks Meter: 44	LYF_LS5504 FRP REMOVE WITH QCFIRE BY GREAT UMT Operation : Boot Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable. Found Port : Qualcomm HS-USB QDLoader 9008 (COM43) Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.1.2 Connecting to phone... OK Waiting for response... OK Init Handshake Sequence... OK Hardware ID : E1B09000 [8936] [00000000] Initializing Protocol... OK Preparing Firehose Loader... Done Sending Firehose Loader... Done Executing Loader... OK Hardware : 8936, eMMC, 16 GB Warning! High Speed Driver not installed. Please install driver from QcFire\Drivers folder. Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512 Reading Partition Table... OK Reading Device Information... OK Device : LYF LS-5504 [msm8916] Software : LYF_LS5504_1.18, LS-5504_J150_20160927.215225 [Tue Sep 27 21:55:42 CST 2016] Android Ver. : 5.1.1 Resetting FRP Lock... . . . Done Remove cable, reconnect battery / hold Power Button ~15 seconds.

02-27-2017, 16:37	#2185 (permalink)
nickname078 Freak Poster Join Date: Feb 2008 Posts: 139 Member: 697211 Status: Offline Thanks Meter: 44	SAMSUNG G531F FRP REMOVE BY OLD METHOD WITH UMT Operation: Reset FRP / RL / EE Port: COM10 : SAMSUNG Mobile USB Modem #3 Checking for Device... Found [Normal Mode] Reading Phone Information... OK Model: SM-G531F IMEI: 35526107****** Software: G531FDDU1APJ2/G531FODD1APJ2/G531FDDU1APJ2/G531FDDU1APJ2 Init Download Mode... OK Port: COM8 : SAMSUNG Mobile USB Modem Reading Data from Phone... Done Chipset: PXA1L88 [HiSpeed] Resetting FRP Lock Data... Done Elapsed Time: 00:48 [Ultimate Samsung Flasher v0.9]

02-28-2017, 08:40	#2186 (permalink)
nickname078 Freak Poster Join Date: Feb 2008 Posts: 139 Member: 697211 Status: Offline Thanks Meter: 44	lava A59 frp remove with spd frp reset With UMT Port : Fastboot Interface Baud Rate : Not Applicable Device : Generic Operation : Huawei SPD FRP Reset Searching for Device in FastBoot Mode... OK Reading Information... OK FastBoot Ver. : 1.0 Product Bootloader : Locked Bootloader is Locked. FRP Reset may fail! Removing FRP Lock... Done Operation Finished. Elapsed Time: 00:14 [Module Ver. 3.4] Log Saved to Logs\170228_130742.log

02-28-2017, 15:30	#2190 (permalink)
nickname078 Freak Poster Join Date: Feb 2008 Posts: 139 Member: 697211 Status: Offline Thanks Meter: 44	LYF_LS-4503 FRP REMOVE WITH QCFIRE BY GREAT UMT Operation : Boot Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable. Found Port : Qualcomm HS-USB QDLoader 9008 (COM23) Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.0 Connecting to phone... OK Waiting for response... OK Init Handshake Sequence... OK Hardware ID : E1009600 [8909] [00000000] Initializing Protocol... OK Preparing Firehose Loader... Done Sending Firehose Loader... Done Executing Loader... OK Hardware : 8909, eMMC, 8 GB Warning! High Speed Driver not installed. Please install driver from QcFire\Drivers folder. Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512 Reading Partition Table... OK Reading Device Information... OK Device : LYF LS-4503 [msm8909] Software : LS-4503-S10A_LYF_L11EN_210_160115, 13bb2fe [Fri Sep 30 18:29:38 CST 2016] Android Ver. : 5.1.1 Resetting FRP Lock... . . . Done Remove cable, reconnect battery / hold Power Button ~15 seconds.