★★★ Post Here All Successfully Repaired Phones by Ultimate Multi Tool ★★★ - Page 155 - GSM-Forum

mr.luckytarun · 03-24-2017, 18:52

SM-J111M FRP REMOVE DONE

mr.luckytarun · 03-25-2017, 06:40

OPPO F1F FRP REMOVE DONE

.::THE ROCK::. · 03-25-2017, 09:27

Operation : Reset Mi Account
Checking for existing devices... Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM16)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.1.0
Connecting to phone... OK
Waiting for response... OK
Init Handshake Sequence... OK
Hardware ID : E1F00400 [8937] [00000000]
Initializing Protocol... OK
Preparing Firehose Loader... Done
Sending Loader [8937.ufl]... Done
Executing Loader... OK
Hardware : 8937, eMMC, 32 GB
Warning! High Speed Driver not installed.
Please install driver from QcFire\Drivers folder.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table... OK
Reading Device Information... OK
Device : Xiaomi Redmi 3S [msm8937]
Software : MMB29M, V8.1.1.0.MALMIDI [Tue Nov 8 11:47:48 CST 2016]
Android Ver. : 6.0.1
Reading Data... Done
Resetting Mi Account... Done
Operation Finished.

Mobile_Care® · 03-25-2017, 12:01

Letv X526 FRP Remove Done

nahidroman · 03-26-2017, 13:04

ZTE BLADE IMEI CALCULATE DONE. WITH UMT

Quote:

Port : Not Applicable
Baud Rate : Not Applicable
Device : ZTE Blade
Operation : Code Calculation
Calculating Code....
IMEI : 861357010037242
Code (Old) : 13270164
Code (New) : 73258870
Operation Finished.
Elapsed Time: 00:01
[Module Ver. 3.6]
Log Saved to Logs\170326_171559.log

[IMG]

[/IMG]
[IMG]

[/IMG]

nahidroman · 03-26-2017, 13:16

MI 3C MI Account remove done with UMT

Port : Fastboot Interface
Baud Rate : Not Applicable
Device : Generic
Operation : Mi Account Reset (Fastboot)
Searching for Device in FastBoot Mode... OK
Reading Information... OK
FastBoot Ver. : LA.BF.1.1.3-01310-8x74.0-42-g55c0688
Product : MSM8974
Warranty : No
Bootloader : Locked
Resetting Mi Account Lock... Done
Rebooting to Normal Mode... Done
Operation Finished.
Elapsed Time: 00:02
[Module Ver. 3.6]
[IMG]

[/IMG]

.::THE ROCK::. · 03-26-2017, 16:32

Port : COM28 : MTK CDC Serial (COM28)
Baud Rate : 921600
Device : MTK Android
Operation : IMEI Repair (META)
Opening Port... OK
Reading Phone Information... Done
CPU : MT6592, E00
Software : MOLY.WR8.W1449.MD.WG.MP.V16
Hardware : LCSH6592_WE_HZZ_L_HSPA_HW
Reading Data.... Done
Writing IMEI[1] 9114417+++++++.... Done
Writing IMEI[2] 9114417+++++++.... Done
Operation Finished.
Elapsed Time: 00:02
[Module Ver. 3.6]
Log Saved to Logs\170326_205114.log

.::THE ROCK::. · 03-26-2017, 16:51

Port : COM11 : ZTE CDMA Handset Diagnostics Interface (COM11)
Baud Rate : 921600
Device : ZTE S194
Operation : Unlock
Opening Port... OK
Reading Information... OK
Compile : Nov 13 2014 15:58:49
Release : Apr 24 2009 24:00:00
Hw Ver. : RIC_S194
ESN : 80871CD6
MEID : A000004E4A12E6
Unlocking Security... OK
Build : RIC_S194_CAM_RBTL21FV1.0
Soft Ver. : RIC_P110B03_RBTL21FV1.0.0B03
Detected : S194
User Code : 0000
Checking if Supported for Unlock... OK
Setting Offline Mode... OK
Unlocking Phone (EFS Method)... OK
Resetting Phone... OK
Port Closed.
Operation Finished.
Time Taken: 00:05
Module Ver. [1.6]
Error Saving Log File!

rehmani · 03-27-2017, 06:53

mi 2016100 format done

Code:

Searching for phone in sideload mode... Found
Device Id    : mido_global
Version    : V8.1.11.0.MCFMIDI
Code Base    : 6.0.1
Ext Info    : GB, en, F
Formatting Data... Done
Operation Finished.

rehmani · 03-27-2017, 14:15

samsung g900f unlock done

Code:

Port    : COM21 : SAMSUNG Mobile USB Modem
Baud Rate    : 115200
Device    : Samsung G361H
Operation    : Read Info
Opening Port... OK
Reading Information... OK
Model    : SM-G900F
IMEI    : 35966006064----
Version Info    : G900FXXS1CPL8
    : G900FOJV1CPJ1
    : G900FXXU1CPI1
    : G900FXXS1CPL8
Port Closed.
Operation Finished.
Elapsed Time: 00:04
[Module Ver. 3.5]
Log Saved to Logs\170327_173656.log


Device: GT-I8190
Operation: Flash Firmware
Port: COM41 : SAMSUNG Mobile USB Modem #2
Checking for Device... Found [Download Mode]
Reading Data from Phone... Done
Chipset: MSM8974 [HiSpeed]
Sending Partition [MODEM]... Done
Closing Session...
Operation Finished.
Elapsed Time: 00:26
[Ultimate Samsung Flasher v0.9]

Port    : COM20 : SAMSUNG Mobile USB Serial Port  (COM20)
Baud Rate    : 115200
Device    : Samsung A500FU
Operation    : Unlock
Opening Port... OK
Reading Phone Information... OK
Compile    : Dec 14 2015 11:27:45
Release    : Jun 03 2015 04:00:00
Hw. Ver.    : AAAAANRZ
ESN    : B0000000
MEID    : 00000000000000
IMEI    : 35966006064----
Switching to Offline Mode... OK
Preparing Phone... OK
Unlocking Phone, Please wait... OK
Resetting Phone... OK
If Phone does not restart, do it manually.
Port Closed.
Operation Finished.
Elapsed Time: 00:04
[Module Ver. 3.5]
Log Saved to Logs\170327_182919.log

rehmani · 03-27-2017, 14:17

samsung b229 repair security done

Code:

Port    : COM25 : SAMSUNG Mobile Modem
Baud Rate    : 921600
Device    : Samsung B119
Operation    : Read Info
Opening Port... OK
Reading Information... OK
Compile    : Aug 10 2011 22:38:01
Release    : Jun 25 2009 B229.0 
Hw Ver.    : SWNEALZ3
ESN    : B0000000
MEID    : 00000000000000
Executing Security Unlock... OK
Sending SPC (480913)... OK
User Code    : 0000
Port Closed.
Operation Finished.
Time Taken: 00:10
Module Ver. [1.6]
Error Saving Log File!

Port    : COM25 : SAMSUNG Mobile Modem
Baud Rate    : 921600
Device    : Samsung B119
Operation    : Write MEID
Opening Port... OK
Reading Information... OK
Compile    : Aug 10 2011 22:38:01
Release    : Jun 25 2009 B229.0 
Hw Ver.    : SWNEALZ3
ESN    : B0000000
MEID    : 00000000000000
Executing Security Unlock... OK
Reading SPC... OK
Sending SPC [480913]... OK
Writing MEID [A0000044FE----]... OK
New ESN    : 80F73F--
New MEID    : A0000044FE----
Port Closed.
Operation Finished.
Time Taken: 00:04
Module Ver. [1.6]
Error Saving Log File!

Port    : COM25 : SAMSUNG Mobile Modem
Baud Rate    : 921600
Device    : Samsung B119
Operation    : Read Info
Opening Port... OK
Reading Information... OK
Compile    : Aug 10 2011 22:38:01
Release    : Jun 25 2009 B229.0 
Hw Ver.    : SWNEALZ3
ESN    : 80F73F--
MEID    : A0000044FE----
Executing Security Unlock... OK
Sending SPC (480913)... OK
User Code    : 0000
Port Closed.
Operation Finished.
Time Taken: 00:07
Module Ver. [1.6]
Error Saving Log File!

rehmani · 03-28-2017, 05:36

samsung j100h unlock done

Code:

Port    : COM41 : SAMSUNG Mobile USB Modem #4
Baud Rate    : 115200
Device    : Samsung G361H
Operation    : Format Phone (AT)
Opening Port... OK
Reading Information... OK
Model    : SM-J100H
IMEI    : 352828077822---
Version Info    : J100HXXU0AOF2
    : J100HOJV0AOF2
    : J100HXXU0AOF2
    : J100HXXU0AOF2
Formatting Phone... OK
Phone Will Reboot When Done.
Port Closed.
Operation Finished.
Elapsed Time: 00:08
[Module Ver. 3.5]
Log Saved to Logs\170328_103814.log


Port    : COM41 : SAMSUNG Mobile USB Modem #4
Baud Rate    : 115200
Device    : Samsung G361H
Operation    : Unlock
Opening Port... OK
Reading Information... OK
Model    : SM-J100H
IMEI    : 352828077822---
Version Info    : J100HXXU0AOF2
    : J100HOJV0AOF2
    : J100HXXU0AOF2
    : J100HXXU0AOF2
Preparing Phone... OK
Reading Lock Status... OK
Status    : SIM Locked*
Phone May Be Hard Locked, Unlock May Not Work
Reading Lock Levels.. OK
Lock Level [0]    : Locked
Lock Level [1]    : Unlocked
Lock Level [2]    : Unlocked
Lock Level [3]    : Unlocked
Lock Level [4]    : Unlocked
Resetting Lock Codes... Done
UnFreeze    : 65858262
Level[1]    : 30686611[Locked]
Level[2]    : 00000000[Unlocked]
Level[3]    : 00000000[Unlocked]
Level[4]    : 00000000[Unlocked]
Level[5]    : 00000000[Unlocked]
If phone still locked, tick Reset Code + Froce Mode and Unlock again.
Port Closed.
Operation Finished.
Elapsed Time: 00:12
[Module Ver. 3.5]
Log Saved to Logs\170328_104459.log

rehmani · 03-28-2017, 05:47

samsung j7 unlock done

Code:

Port    : COM60 : SAMSUNG Mobile USB Modem #3
Baud Rate    : 115200
Device    : Samsung G361H
Operation    : Read Info
Opening Port... OK
Reading Information... OK
Model    : SM-J700F
IMEI    : 358688071460---
Version Info    : J700FXXS2APE1
    : J700FOJV2APC5
    : J700FXXU2APC2
    : J700FXXS2APE1
Port Closed.
Operation Finished.
Elapsed Time: 00:05
[Module Ver. 3.5]
Log Saved to Logs\170328_111210.log
Port    : COM60 : SAMSUNG Mobile USB Modem #3
Baud Rate    : 921600
Device    : Samsung A310F
Operation    : Unlock
Opening Port... OK
Reading Information... OK
Model    : SM-J700F
IMEI    : 358688071460----
Version Info    : J700FXXS2APE1
    : J700FOJV2APC5
    : J700FXXU2APC2
    : J700FXXS2APE1
Checking Lock Status... . OK
Lock Status    : Locked
Unlocking Phone... . Done
Operation Finished.
Elapsed Time: 00:08
[Module Ver. 3.5]
Log Saved to Logs\170328_111249.log

miftahulbari · 03-28-2017, 07:26

Micromax q4251 frp remove done

Port : Fastboot Interface
Baud Rate : Not Applicable
Device : Generic
Operation : Qualcomm FRP Reset
Searching for Device in FastBoot Mode... OK
Reading Information... OK
FastBoot Ver. : 0.5
Product : MSM8909
Warranty : Yes
Bootloader : Unlocked
Removing FRP Lock... Done
Operation Finished.
Elapsed Time: 00:02
[Module Ver. 3.6]

but after remov frp need to full flash....

any way my best tool

ultimate multi tool

miftahulbari · 03-28-2017, 07:27

j200g frp remove done...

Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM51 : SAMSUNG Mobile USB Modem #14
Checking for Device... Found [Normal Mode]
Reading Phone Information... OK
Model: SM-J200G
IMEI: 356271071499733
Software: J200GDDU1A1/J200GODD1A1/J200GDDU1A1/J200GDDU1A1
Init Download Mode... OK
Port: COM7 : SAMSUNG Mobile USB Modem #3
Reading Data from Phone... Done
Chipset: LSI3475 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Once Phone is completely ON, wait a few minutes and then.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Elapsed Time: 01:20
[Ultimate Samsung Flasher v1.0]

03-25-2017, 09:27	#2313 (permalink)
.::THE ROCK::. Product Supporter Join Date: Jul 2011 Location: ISLAMIC & INDIA WITH MIRACLE T Age: 37 Posts: 5,807 Member: 1617868 Status: Offline Sonork: 100.1625996 Thanks Meter: 2,028	MI 3S PRIME mi account DONE Operation : Reset Mi Account Checking for existing devices... Not Found Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable. Found Port : Qualcomm HS-USB QDLoader 9008 (COM16) Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.1.0 Connecting to phone... OK Waiting for response... OK Init Handshake Sequence... OK Hardware ID : E1F00400 [8937] [00000000] Initializing Protocol... OK Preparing Firehose Loader... Done Sending Loader [8937.ufl]... Done Executing Loader... OK Hardware : 8937, eMMC, 32 GB Warning! High Speed Driver not installed. Please install driver from QcFire\Drivers folder. Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512 Reading Partition Table... OK Reading Device Information... OK Device : Xiaomi Redmi 3S [msm8937] Software : MMB29M, V8.1.1.0.MALMIDI [Tue Nov 8 11:47:48 CST 2016] Android Ver. : 6.0.1 Reading Data... Done Resetting Mi Account... Done Operation Finished.

03-26-2017, 13:16	#2316 (permalink)
nahidroman No Life Poster Join Date: Aug 2015 Location: Bangladesh Age: 30 Posts: 600 Member: 2443283 Status: Offline Thanks Meter: 518	MI 3C MI Account remove done with UMT Port : Fastboot Interface Baud Rate : Not Applicable Device : Generic Operation : Mi Account Reset (Fastboot) Searching for Device in FastBoot Mode... OK Reading Information... OK FastBoot Ver. : LA.BF.1.1.3-01310-8x74.0-42-g55c0688 Product : MSM8974 Warranty : No Bootloader : Locked Resetting Mi Account Lock... Done Rebooting to Normal Mode... Done Operation Finished. Elapsed Time: 00:02 [Module Ver. 3.6] [IMG][/IMG]

03-26-2017, 16:32	#2317 (permalink)
.::THE ROCK::. Product Supporter Join Date: Jul 2011 Location: ISLAMIC & INDIA WITH MIRACLE T Age: 37 Posts: 5,807 Member: 1617868 Status: Offline Sonork: 100.1625996 Thanks Meter: 2,028	Mmx e313 imei repair og Port : COM28 : MTK CDC Serial (COM28) Baud Rate : 921600 Device : MTK Android Operation : IMEI Repair (META) Opening Port... OK Reading Phone Information... Done CPU : MT6592, E00 Software : MOLY.WR8.W1449.MD.WG.MP.V16 Hardware : LCSH6592_WE_HZZ_L_HSPA_HW Reading Data.... Done Writing IMEI[1] 9114417+++++++.... Done Writing IMEI[2] 9114417+++++++.... Done Operation Finished. Elapsed Time: 00:02 [Module Ver. 3.6] Log Saved to Logs\170326_205114.log

03-26-2017, 16:51	#2318 (permalink)
.::THE ROCK::. Product Supporter Join Date: Jul 2011 Location: ISLAMIC & INDIA WITH MIRACLE T Age: 37 Posts: 5,807 Member: 1617868 Status: Offline Sonork: 100.1625996 Thanks Meter: 2,028	Zte s194 unlock umt Port : COM11 : ZTE CDMA Handset Diagnostics Interface (COM11) Baud Rate : 921600 Device : ZTE S194 Operation : Unlock Opening Port... OK Reading Information... OK Compile : Nov 13 2014 15:58:49 Release : Apr 24 2009 24:00:00 Hw Ver. : RIC_S194 ESN : 80871CD6 MEID : A000004E4A12E6 Unlocking Security... OK Build : RIC_S194_CAM_RBTL21FV1.0 Soft Ver. : RIC_P110B03_RBTL21FV1.0.0B03 Detected : S194 User Code : 0000 Checking if Supported for Unlock... OK Setting Offline Mode... OK Unlocking Phone (EFS Method)... OK Resetting Phone... OK Port Closed. Operation Finished. Time Taken: 00:05 Module Ver. [1.6] Error Saving Log File!

03-27-2017, 06:53	#2319 (permalink)
rehmani No Life Poster Join Date: Aug 2006 Location: proud to be an INDIAN Muslim Age: 39 Posts: 5,175 Member: 333199 Status: Offline Sonork: may i help u just pm me Thanks Meter: 2,405	mi 2016100 format done Code: Searching for phone in sideload mode... Found Device Id : mido_global Version : V8.1.11.0.MCFMIDI Code Base : 6.0.1 Ext Info : GB, en, F Formatting Data... Done Operation Finished.

03-24-2017, 18:52	#2311 (permalink)
mr.luckytarun No Life Poster Join Date: Dec 2009 Location: INDIA Age: 36 Posts: 3,135 Member: 1195083 Status: Offline Sonork: QQ:3208821449 Thanks Meter: 1,348	SM-J111M FRP REMOVE DONE

03-25-2017, 06:40	#2312 (permalink)
mr.luckytarun No Life Poster Join Date: Dec 2009 Location: INDIA Age: 36 Posts: 3,135 Member: 1195083 Status: Offline Sonork: QQ:3208821449 Thanks Meter: 1,348	OPPO F1F FRP REMOVE DONE

03-25-2017, 12:01	#2314 (permalink)
Mobile_Care® Insane Poster Join Date: Jan 2014 Location: India Posts: 95 Member: 2110293 Status: Offline Sonork: 12312345 Thanks Meter: 103	Letv X526 FRP Remove Done

03-28-2017, 07:26	#2324 (permalink)
miftahulbari No Life Poster Join Date: Jan 2014 Location: gsmforum Posts: 725 Member: 2118052 Status: Offline Thanks Meter: 568	Micromax q4251 frp remove done Port : Fastboot Interface Baud Rate : Not Applicable Device : Generic Operation : Qualcomm FRP Reset Searching for Device in FastBoot Mode... OK Reading Information... OK FastBoot Ver. : 0.5 Product : MSM8909 Warranty : Yes Bootloader : Unlocked Removing FRP Lock... Done Operation Finished. Elapsed Time: 00:02 [Module Ver. 3.6] but after remov frp need to full flash.... any way my best tool ultimate multi tool

03-28-2017, 07:27	#2325 (permalink)
miftahulbari No Life Poster Join Date: Jan 2014 Location: gsmforum Posts: 725 Member: 2118052 Status: Offline Thanks Meter: 568	j200g frp remove done... Device: Samsung Device Operation: Reset FRP (New Method) Port: COM51 : SAMSUNG Mobile USB Modem #14 Checking for Device... Found [Normal Mode] Reading Phone Information... OK Model: SM-J200G IMEI: 356271071499733 Software: J200GDDU1A1/J200GODD1A1/J200GDDU1A1/J200GDDU1A1 Init Download Mode... OK Port: COM7 : SAMSUNG Mobile USB Modem #3 Reading Data from Phone... Done Chipset: LSI3475 [HiSpeed] Resetting FRP Lock Data... . Done Closing Session... Done ---------------- IMPORTANT ---------------- Wait for phone to reboot and turn on fully or TURN ON manually. Once Phone is completely ON, wait a few minutes and then. goto Menu > Settings > Backup and Reset and do Factory data Reset. Elapsed Time: 01:20 [Ultimate Samsung Flasher v1.0]