★★★ Post Here All Successfully Repaired Phones by Ultimate Multi Tool ★★★ - Page 272 - GSM-Forum

irfanakareem · 02-15-2018, 13:41

Code:

Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM246 : SAMSUNG Mobile USB Modem #128
Checking for Device... Found [Normal Mode]
Reading Phone Information... OK
Model: SM-J710GN
IMEI: 358XXXXXXXXX
Software: J710GNDXU3BQH6/J710GNOLB3BQH6/J710GNDXU3BQH2/J710GNDXU3BQH6
Init Download Mode... OK
Port: COM4 : SAMSUNG Mobile USB Modem
Reading Data from Phone... Done
Chipset: LSI7870 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Once Phone is completely ON, wait a few minutes and then.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Elapsed Time: 00:53
[Ultimate Samsung Flasher v1.3]

technomak · 02-15-2018, 19:14

Lenovo A2020a40 IMEI repair done with UMT

Logs:

Code:

Port	: COM72 : Qualcomm HS-USB Android DIAG 901D (COM72)
Baud Rate	: 921600
Device	: Qualcomm Android
Operation	: Write IMEI [UMT Method [1]]
Opening Port... OK
Reading Phone Information... OK
Compile	: Nov 30 2016 12:34:43
Release	: Aug 08 2016 07:00:00
Hw Ver.	: 8909.gen
Build	: MPSS.JO.1.0.c5-00051-M8909EAAAANVZM-1.46590.1.66140.1
IMEI [1]	: 861747036026007
IMEI [2]	: 861747038026005
Method	: UMT Method [1]
Preparing Data... Done
Writing IMEI 1 [861747036026007]... Done
Writing IMEI 2 [861747038026005]... Done
Rebooting Phone... Done
Please reboot maunally if does not reboot automatically.
Operation Finished.
Elapsed Time: 00:04
[Module Ver. 4.8]
Log Saved to Logs\180215_214352.log

OM MOBILE REP · 02-16-2018, 07:53

samsung j7 frp done great umt team
Port: COM67 : SAMSUNG Mobile USB Modem #7
Checking for Device... Found [Download Mode]
Reading Data from Phone... Done
Chipset: LSI7580 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Once Phone is completely ON, wait a few minutes and then.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Elapsed Time: 01:05
[Ultimate Samsung Flasher v1.3]

irfanakareem · 02-16-2018, 16:01

Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM242 : SAMSUNG Mobile USB Modem #127
Checking for Device... Found [Normal Mode]
Reading Phone Information... OK
Model: SM-G570F
IMEI: 35XXXXXXXXXXXX
Software: G570FXXU1BQL2/G570FOJV1BQL2/G570FXXU1BQI6/G570FXXU1BQL2
Init Download Mode... OK
Port: COM4 : SAMSUNG Mobile USB Modem
Reading Data from Phone... Done
Chipset: LSI7570 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Once Phone is completely ON, wait a few minutes and then.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Elapsed Time: 00:54
[Ultimate Samsung Flasher v1.3]

maxpatri9 · 02-16-2018, 22:28

SAMSUNG SM-T585 FRP DONE

Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM710 : SAMSUNG Mobile USB Modem #2550
Checking for Device... Found [Normal Mode]
Reading Phone Information... OK
Model: SM-T585
IMEI: 357812081096114
Software: T585XXU2BQI9/T585PHE2BQI9/T585XXU2BQI9/T585XXU2BQI9
Init Download Mode... OK
Port: COM82 : SAMSUNG Mobile USB Modem #1674
Reading Data from Phone... Done
Chipset: LSI7870 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Once Phone is completely ON, wait a few minutes and then.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Elapsed Time: 01:00
[Ultimate Samsung Flasher v1.3]

djj007 · 02-17-2018, 14:27

Device : Xiaomi Redmi Note 4
Operation : Disable Mi Account
Checking for existing devices...Found
Port : COM63
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8953.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware* : 8953, eMMC, 64 GB
Warning! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi Note 4 [msm8953]
Software : AL1512-mido-build-20180112234639, V9.2.1.0.NCFMIEK [Fri Jan 12 23:46:37 WIB 2018]
Android Ver. : 7.0
Reading Data...Done
Preparing Data...Done
Trying to Disable Mi Account...Done
Operation Finished.
Module Ver. 1.7

aukonline · 02-17-2018, 14:29

https://www.youtube.com/watch?v=z4OaXUGEgKk&t=82s

irfanakareem · 02-17-2018, 17:26

Operation : Reset Mi Account
Checking for existing devices...Found
Port : COM143
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8953.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware* : 8953, eMMC, 32 GB
Warning! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi Note 4 [msm8953]
Software : AL1512-mido-build-20180202194831, V9.2.2.0.NCFMIEK [Fri Feb 2 19:48:29 WIB 2018]
Android Ver. : 7.0
Resetting Mi Account Data...Done
Preparing Data...Done
Formatting Userdata...Done
When phone is completely ON, connect to Internet and add Mi Account.
Operation Finished.
Module Ver. 1.7

technomak · 02-18-2018, 08:55

Code:

Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM93 : SAMSUNG Mobile USB Modem #39
Checking for Device... Found [Normal Mode]
Reading Phone Information... OK
Model: SM-G610F
IMEI: xxxxxxxxxxxx
Software: G610FDDU1BQJ7/G610FOJV1BQJ7/G610FDDU1BQJ4/G610FDDU1BQJ7
Init Download Mode... OK
Port: COM94 : SAMSUNG Mobile USB Modem #40
Reading Data from Phone... Done
Chipset: LSI7870 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Once Phone is completely ON, wait a few minutes and then.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Elapsed Time: 00:50
[Ultimate Samsung Flasher v1.3]

taimur-ahmad · 02-18-2018, 09:57

Moto E4 xt1767 2+16 frp reset done

Code:

Port	: Fastboot Inteface
Baud Rate	: Not Applicable
Device	: Motorola
Operation	: New FRP Reset
Searching for Device in FastBoot Mode... OK
Reading Phone Information...
Model	: XT1767
Boot Ver.	: moto-msm8917-BA.09(*)
Baseband	: M8917_16000.269.04.03.01R PERRY_NA_CUST
Software	: Blur_Version.26.201.3.perry_verizon.verizon.en.US
IMEI	: 353308081450777
CPU	: MSM8917
RAM	: 2GB SKHYNIX LP3 DIE=8Gb M5=06 M6=04 M7=00 M8=1F
EMMC	: 16GB SKHYNIX HAG4a2 RV=08 PV=A5 FV=00000000000000A5
Setting Factory Mode... OK
Searching Network Interface... Found
Connecting to device... OK
Model	: Moto E (4)
Bootloader	: 0xBA09
Baseband	: M8917_16000.269.04.03.01R PERRY_NA_CUST
Build	: Blur_Version.26.201.3.perry_verizon.verizon.en.US
Android	: 7.1.1
Searching Network Interface... Found
Connecting to device... OK
Model	: Moto E (4)
Bootloader	: 0xBA09
Baseband	: M8917_16000.269.04.03.01R PERRY_NA_CUST
Build	: Blur_Version.26.201.3.perry_verizon.verizon.en.US
Android	: 7.1.1
Resetting FRP... OK
Searching for Device in FastBoot Mode... OK
Removing Factory Mode... OK
Operation Finished.
Elapsed Time: 04:52
[Module Ver. 4.4]
Log Saved to Logs\180217_180843.log

technomak · 02-18-2018, 17:48

Oppo A33f dead; successfully repaired with UMT

Logs:-

Code:

Operation	: Flash
Checking for existing devices...Found
Port	: COM109
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID	: E1507000 [8916] 00000000
OPK_DATA	: 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8916_014.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware*	: 8916, eMMC, 2 GB
Warning! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info	: In: 65536 [4096], Out: 16384, Sector Size: 512
Writing [NON-HLOS.bin] -> [modem] ...Done
Writing [ddr.img] -> [DDR] ...Done
Writing [sec.dat] -> [sec] ...Done
Writing [sbl1.mbn] -> [sbl1] ...Done
Writing [sbl1.mbn] -> [sbl1bak] ...Done
Writing [emmc_appsboot.mbn] -> [aboot] ...Done
Writing [emmc_appsboot.mbn] -> [abootbak] ...Done
Writing [rpm.mbn] -> [rpm] ...Done
Writing [rpm.mbn] -> [rpmbak] ...Done
Writing [tz.mbn] -> [tz] ...Done
Writing [tz.mbn] -> [tzbak] ...Done
Writing [hyp.mbn] -> [hyp] ...Done
Writing [hyp.mbn] -> [hypbak] ...Done
[PROTECTIVE_FLASH] Skipping [dynamic_nvbk.bin] -> [oppodycnvbk]
[PROTECTIVE_FLASH] Skipping [static_nvbk.bin] -> [oppostanvbk]
Writing [logo.bin] -> [LOGO] ...Done
Writing [boot.img] -> [boot] ...Done
Writing [recovery.img] -> [recovery] ...Done
Writing [system.img] -> [system]  ...Done
Writing [cache.img] -> [cache]  ...Done
Writing [persist.img] -> [persist]  ...Done
Writing [DRIVER.ISO] -> [DRIVER] ...Done
Writing [userdata.img] -> [userdata]  ...Done
Writing [gpt_main0_partition_MSM_15095_16G.xml.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Resetting device...Failed
Remove cable, reconnect battery / hold Power Button ~15 seconds.
Operation Finished.
Module Ver. 1.7

pintu_das · 02-20-2018, 06:43

Operation : Format FS
[IMG]

[/IMG]

Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Android HS-USB QDLoader 9008 (COM995)
Driver Info : TCL, qcusbser.sys, 6.0.0.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1507000 [8916] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A2 6AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8916_014.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware* : 8916, eMMC, 16 GB
Warning! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : OPPO A37f [msm8916]
Software : A37fEX_11_170522, 1480422943 [Mon May 22 18:56:07 CST 2017]
Android Ver. : 5.1.1
Preparing Data...Done
Formatting Userdata...Done
Finalizing...Done
Operation Finished.
Module Ver. 1.7

hfreire · 02-20-2018, 07:41

Motorola moto g5 plus xt1687 remove frp v7

Mazvita · 02-20-2018, 08:46

Searching for phone in sideload mode...Found
Device Id : rolex_global
Version : V8.1.4.0.MCCMIDI
Code Base : 6.0.1
Ext Info : GB, en, F
Formatting Data...Done
Rebooting device...Done
Operation Finished.
Module Ver. 1.7

meltonjimenez · 02-20-2018, 09:08

J730g frp 7.0 done

debug
https://www.youtube.com/watch?v=rGhqdBGijIA

02-16-2018, 16:01	#4069 (permalink)
irfanakareem Freak Poster Join Date: Sep 2016 Location: Dubai Posts: 161 Member: 2630333 Status: Offline Thanks Meter: 77	Sm-g570f frp done Device: Samsung Device Operation: Reset FRP (New Method) Port: COM242 : SAMSUNG Mobile USB Modem #127 Checking for Device... Found [Normal Mode] Reading Phone Information... OK Model: SM-G570F IMEI: 35XXXXXXXXXXXX Software: G570FXXU1BQL2/G570FOJV1BQL2/G570FXXU1BQI6/G570FXXU1BQL2 Init Download Mode... OK Port: COM4 : SAMSUNG Mobile USB Modem Reading Data from Phone... Done Chipset: LSI7570 [HiSpeed] Resetting FRP Lock Data... . Done Closing Session... Done ---------------- IMPORTANT ---------------- Wait for phone to reboot and turn on fully or TURN ON manually. Once Phone is completely ON, wait a few minutes and then. goto Menu > Settings > Backup and Reset and do Factory data Reset. Elapsed Time: 00:54 [Ultimate Samsung Flasher v1.3]

02-17-2018, 14:27	#4071 (permalink)
djj007 No Life Poster Join Date: Nov 2016 Location: GUJARAT Posts: 1,439 Member: 2643730 Status: Offline Thanks Meter: 1,115	redmi note 4 mi account removed by umt Device : Xiaomi Redmi Note 4 Operation : Disable Mi Account Checking for existing devices...Found Port : COM63 Opening Port...OK Init Handshake Sequence...OK Hardware ID : E1600400 [8953] 00000000 OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B Initializing Protocol...OK Using Auto Loader Selection [1] Preparing Firehose Loader...Done Sending Loader [8953.ufl]...Done Executing Loader...OK Detecting Chip Type...OK Hardware* : 8953, eMMC, 64 GB Warning! High Speed Driver is not installed. Please install driver from QcFire\Drivers folder using Device Manager. Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512 Reading Partition Table...OK Reading Device Information...OK Device : Xiaomi Redmi Note 4 [msm8953] Software : AL1512-mido-build-20180112234639, V9.2.1.0.NCFMIEK [Fri Jan 12 23:46:37 WIB 2018] Android Ver. : 7.0 Reading Data...Done Preparing Data...Done Trying to Disable Mi Account...Done Operation Finished. Module Ver. 1.7

02-17-2018, 14:29	#4072 (permalink)
aukonline No Life Poster Join Date: Mar 2005 Location: gsmwebstore Posts: 1,807 Member: 125366 Status: Offline Sonork: 100.1602649 Thanks Meter: 108	Moto G XT1609 100% Done By UMT https://www.youtube.com/watch?v=z4OaXUGEgKk&t=82s

02-17-2018, 17:26	#4073 (permalink)
irfanakareem Freak Poster Join Date: Sep 2016 Location: Dubai Posts: 161 Member: 2630333 Status: Offline Thanks Meter: 77	Xiaomi Redmi Note 4 Operation : Reset Mi Account Checking for existing devices...Found Port : COM143 Opening Port...OK Init Handshake Sequence...OK Hardware ID : E1600400 [8953] 00000000 OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B Initializing Protocol...OK Using Auto Loader Selection [1] Preparing Firehose Loader...Done Sending Loader [8953.ufl]...Done Executing Loader...OK Detecting Chip Type...OK Hardware* : 8953, eMMC, 32 GB Warning! High Speed Driver is not installed. Please install driver from QcFire\Drivers folder using Device Manager. Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512 Reading Partition Table...OK Reading Device Information...OK Device : Xiaomi Redmi Note 4 [msm8953] Software : AL1512-mido-build-20180202194831, V9.2.2.0.NCFMIEK [Fri Feb 2 19:48:29 WIB 2018] Android Ver. : 7.0 Resetting Mi Account Data...Done Preparing Data...Done Formatting Userdata...Done When phone is completely ON, connect to Internet and add Mi Account. Operation Finished. Module Ver. 1.7

02-20-2018, 06:43	#4077 (permalink)
pintu_das No Life Poster Join Date: Jan 2015 Location: Narsingdi, Dhaka, Bangladesh Age: 28 Posts: 2,207 Member: 2325851 Status: Offline Sonork: 100.1680491 Thanks Meter: 2,363	OPPO A37f [msm8916] Format FS done Operation : Format FS [IMG][/IMG] Operation : Format FS Checking for existing devices...Not Found Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable. Some phones may need Special Boot Cable or TestPoint for EDL mode. Found Port : Android HS-USB QDLoader 9008 (COM995) Driver Info : TCL, qcusbser.sys, 6.0.0.0 Connecting to phone...OK Waiting for response...OK Init Handshake Sequence...OK Hardware ID : E1507000 [8916] 00000000 OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A2 6AB1B4B3F1CF9E Initializing Protocol...OK Using Auto Loader Selection [1] Preparing Firehose Loader...Done Sending Loader [8916_014.ufl]...Done Executing Loader...OK Detecting Chip Type...OK Hardware* : 8916, eMMC, 16 GB Warning! High Speed Driver is not installed. Please install driver from QcFire\Drivers folder using Device Manager. Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512 Reading Partition Table...OK Reading Device Information...OK Device : OPPO A37f [msm8916] Software : A37fEX_11_170522, 1480422943 [Mon May 22 18:56:07 CST 2017] Android Ver. : 5.1.1 Preparing Data...Done Formatting Userdata...Done Finalizing...Done Operation Finished. Module Ver. 1.7

02-16-2018, 07:53	#4068 (permalink)
OM MOBILE REP Freak Poster Join Date: Apr 2015 Location: Samastipur (BIHAR) 9006357621 Posts: 119 Member: 2383385 Status: Offline Thanks Meter: 98	samsung j7 frp done great umt team Port: COM67 : SAMSUNG Mobile USB Modem #7 Checking for Device... Found [Download Mode] Reading Data from Phone... Done Chipset: LSI7580 [HiSpeed] Resetting FRP Lock Data... . Done Closing Session... Done ---------------- IMPORTANT ---------------- Wait for phone to reboot and turn on fully or TURN ON manually. Once Phone is completely ON, wait a few minutes and then. goto Menu > Settings > Backup and Reset and do Factory data Reset. Elapsed Time: 01:05 [Ultimate Samsung Flasher v1.3]

02-16-2018, 22:28	#4070 (permalink)
maxpatri9 No Life Poster Join Date: Apr 2015 Location: Dominican Republic Posts: 2,563 Member: 2382052 Status: Offline Thanks Meter: 1,511	SAMSUNG SM-T585 FRP DONE Device: Samsung Device Operation: Reset FRP (New Method) Port: COM710 : SAMSUNG Mobile USB Modem #2550 Checking for Device... Found [Normal Mode] Reading Phone Information... OK Model: SM-T585 IMEI: 357812081096114 Software: T585XXU2BQI9/T585PHE2BQI9/T585XXU2BQI9/T585XXU2BQI9 Init Download Mode... OK Port: COM82 : SAMSUNG Mobile USB Modem #1674 Reading Data from Phone... Done Chipset: LSI7870 [HiSpeed] Resetting FRP Lock Data... . Done Closing Session... Done ---------------- IMPORTANT ---------------- Wait for phone to reboot and turn on fully or TURN ON manually. Once Phone is completely ON, wait a few minutes and then. goto Menu > Settings > Backup and Reset and do Factory data Reset. Elapsed Time: 01:00 [Ultimate Samsung Flasher v1.3]

02-20-2018, 07:41	#4078 (permalink)
hfreire No Life Poster Join Date: Dec 2010 Location: Uruguay Posts: 659 Member: 1459662 Status: Offline Thanks Meter: 152	Motorola moto g5 plus xt1687 remove frp v7 Motorola moto g5 plus xt1687 remove frp v7

02-20-2018, 08:46	#4079 (permalink)
Mazvita Freak Poster Join Date: Mar 2017 Location: In this world Posts: 262 Member: 2692991 Status: Offline Thanks Meter: 210	Mi format done Searching for phone in sideload mode...Found Device Id : rolex_global Version : V8.1.4.0.MCCMIDI Code Base : 6.0.1 Ext Info : GB, en, F Formatting Data...Done Rebooting device...Done Operation Finished. Module Ver. 1.7

02-20-2018, 09:08	#4080 (permalink)
meltonjimenez Freak Poster Join Date: Jun 2014 Location: quezon city, PH Posts: 247 Member: 2199451 Status: Offline Thanks Meter: 74	J730g frp 7.0 done debug https://www.youtube.com/watch?v=rGhqdBGijIA