Samsung j120a frp done - GSM-Forum

maxpatri9 · 03-20-2018, 15:59

Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM39 : SAMSUNG Mobile USB Modem #18
Checking for Device... Found [Normal Mode]
Reading Phone Information... OK
Model: SM-J120A
IMEI: 353118089543063
Software: J120AUCU2APJ2/J120AATT2APJ2/J120AUCU2APJ2/J120AUCU2APJ2
Init Download Mode... OK
Port: COM3 : SAMSUNG Mobile USB Modem
Reading Data from Phone... Done
Chipset: LSI3475 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Once Phone is completely ON, wait a few minutes and then.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Elapsed Time: 01:13
[Ultimate Samsung Flasher v1.3]

miftahuljawwal · 03-26-2018, 21:33

J120a FRP successful with Octopus

-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM4
Selected model: SM-J120A
Operation: Reset FRP - UART EMMC
Searching for UART interface.. COM4
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Operation was canceled
Performed by 2.6.6 Software version.
-----------------------------------------------------------------------------------
To connect SM-J120A phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM4
Selected model: SM-J120A
Operation: Reset FRP - UART EMMC
Searching for UART interface.. COM4
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...
Searching for UART interface.. COM4
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (1/2 attempt)..success
FRP / Reactivation lock is successfully reseted!
Performed by 2.6.6 Software version.

03-20-2018, 15:59	#1 (permalink)
maxpatri9 No Life Poster Join Date: Apr 2015 Location: Dominican Republic Posts: 2,563 Member: 2382052 Status: Offline Thanks Meter: 1,511	Samsung j120a frp done Device: Samsung Device Operation: Reset FRP (New Method) Port: COM39 : SAMSUNG Mobile USB Modem #18 Checking for Device... Found [Normal Mode] Reading Phone Information... OK Model: SM-J120A IMEI: 353118089543063 Software: J120AUCU2APJ2/J120AATT2APJ2/J120AUCU2APJ2/J120AUCU2APJ2 Init Download Mode... OK Port: COM3 : SAMSUNG Mobile USB Modem Reading Data from Phone... Done Chipset: LSI3475 [HiSpeed] Resetting FRP Lock Data... . Done Closing Session... Done ---------------- IMPORTANT ---------------- Wait for phone to reboot and turn on fully or TURN ON manually. Once Phone is completely ON, wait a few minutes and then. goto Menu > Settings > Backup and Reset and do Factory data Reset. Elapsed Time: 01:13 [Ultimate Samsung Flasher v1.3]

03-26-2018, 21:33	#2 (permalink)
miftahuljawwal Freak Poster Join Date: Jan 2007 Location: <Al hind al Garbiyya> Barbados Posts: 157 Member: 430155 Status: Offline Thanks Meter: 40	J120a FRP successful with Octopus ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM4 Selected model: SM-J120A Operation: Reset FRP - UART EMMC Searching for UART interface.. COM4 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Operation was canceled Performed by 2.6.6 Software version. ----------------------------------------------------------------------------------- To connect SM-J120A phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->More->About Device. 3.Tap on "Build number" 7 times to enable developer options. 4. Go to Menu->Settings->More->Developer options. 5. Turn on "USB Debugging" option. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM4 Selected model: SM-J120A Operation: Reset FRP - UART EMMC Searching for UART interface.. COM4 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Rebooting phone in Upload Mode...OK Please connect phone to USB cable.. Searching for a phone. Please wait...OK Reading data... Checking operation... Searching for UART interface.. COM4 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Phone found. Resetting FRP lock (1/2 attempt)..success FRP / Reactivation lock is successfully reseted! Performed by 2.6.6 Software version.