Vivo Z1 pro make support team - GSM-Forum

ChandruChiyyan · 08-14-2019, 12:56

UMT team make support Vivo Z1 pro .

Quote:

Operation : Reset Locks (Vivo)
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM18)
Driver Info : HS Corporation, ghsser.sys, 10.2104.1.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1801000 [E1801000] 03007300
OPK_DATA : 7C81953E833D16B94703B743C9B7F41CBF1608F0990A4C2B3A 112C52810CB8F1
Initializing Protocol...OK
Using Auto Loader Selection [0]
CPU not found in database.
Operation Finished.
QcFire Ver. 4.6

**U.M.T** · 08-14-2019, 13:56

If you have firmware, please use Heuristic Method.

Br,
UMT

ChandruChiyyan · 08-14-2019, 14:12

Quote:

Originally Posted by U.M.T

If you have firmware, please use Heuristic Method.

Br,
UMT

No i dont have Firmware

**U.M.T** · 08-14-2019, 15:04

****************************/file/52z5q...obile.rar/file

Check here!

BE WARNED! We have not personally tested this file or link. So download it at your own risk.

If it has loader, it can help you. Just follow Heuristic Mode in QcFire.

Br,
UMT

ChandruChiyyan · 08-15-2019, 08:18

I tryed Heuristic method getting failed ...

here is the log:

Code:

Operation	: Format Userdata
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port	: Qualcomm HS-USB QDLoader 9008 (COM18)
Driver Info	: HS Corporation, ghsser.sys, 10.2104.1.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID	: E1801000 [E1801000] 03007300
OPK_DATA	: 7C81953E833D16B94703B743C9B7F41CBF1608F0990A4C2B3A112C52810CB8F1
Initializing Protocol...OK
Sending Loader [prog_firehose_ddr.elf]...Done
Executing Loader...OK
Initiazling Storage...OK
Read	: Not Allowed
Write	: Not Allowed
Formatting userdata...Failed
Operation Failed.
QcFire Ver. 4.6

buffer2k11 · 08-15-2019, 08:27

can i ask if what memory ic using z1 pro attached ic code

or

ex. emcp 254 or ufs 254 thanks

br,

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-14-2019, 13:56	#2 (permalink)
U.M.T Product Manager Join Date: Sep 2015 Location: Inside UMT Posts: 9,406 Member: 2465108 Status: Offline Sonork: No More Used Thanks Meter: 13,432	If you have firmware, please use Heuristic Method. Br, UMT

08-14-2019, 15:04	#4 (permalink)
U.M.T Product Manager Join Date: Sep 2015 Location: Inside UMT Posts: 9,406 Member: 2465108 Status: Offline Sonork: No More Used Thanks Meter: 13,432	****************************/file/52z5q...obile.rar/file Check here! BE WARNED! We have not personally tested this file or link. So download it at your own risk. If it has loader, it can help you. Just follow Heuristic Mode in QcFire. Br, UMT

08-15-2019, 08:27	#6 (permalink)
buffer2k11 Freak Poster Join Date: Jul 2016 Posts: 440 Member: 2604648 Status: Offline Thanks Meter: 346	can i ask if what memory ic using z1 pro attached ic code or ex. emcp 254 or ufs 254 thanks br,