Samsung P5210 TAb Dead boot done via emmc pro. - GSM-Forum

KIKO_PH · 03-08-2018, 08:15

Samsung P5210 TAb Dead boot done via emmc pro.
after repair boot write Firmware here.GT-P5210 Firmware
File sharing and storage made simple
File sharing and storage made simple
File sharing and storage made simple
File sharing and storage made simple
File sharing and storage made simple
File sharing and storage made simple
File sharing and storage made simple

cranknet · 03-08-2018, 12:42

What was the condition of the TAB before the repair process?

ivanych79 · 03-09-2018, 16:34

if you replace memory from this manual will not be of use. since the GP1 partition will be empty.

**Electroboys** · 03-15-2018, 07:33

Quote:

Originally Posted by ivanych79

if you replace memory from this manual will not be of use. since the GP1 partition will be empty.

We can read / write - create GP1 partition too ..

Best Regards
Oz.

ivanych79 · 03-16-2018, 11:47

Quote:

Originally Posted by Electroboys

We can read / write - create GP1 partition too ..

Best Regards
Oz.

with GPU 1 figured out, and how to expose the configuration from where it is for example this

Code:

Boot from: no boot , width: 4 bit
Boot Partition [179] / Bus Config [177] : 0x00 / 0x01
H/W Reset Function [162] : 0x00 , RST_n signal is temporarily disabled

Partition setting [PARTITION_SETTING_COMPLETE] : 0x01
EMMC Permanent / Temporary Write Protection : No / No

03-08-2018, 08:15	#1 (permalink)
KIKO_PH Freak Poster Join Date: Dec 2013 Posts: 204 Member: 2091560 Status: Offline Sonork: 000000 Thanks Meter: 44	Samsung P5210 TAb Dead boot done via emmc pro. Samsung P5210 TAb Dead boot done via emmc pro. after repair boot write Firmware here.GT-P5210 Firmware File sharing and storage made simple File sharing and storage made simple File sharing and storage made simple File sharing and storage made simple File sharing and storage made simple File sharing and storage made simple File sharing and storage made simple

03-08-2018, 12:42	#2 (permalink)
cranknet Freak Poster Join Date: Jan 2014 Location: Algeria Posts: 145 Member: 2105719 Status: Offline Thanks Meter: 20	What was the condition of the TAB before the repair process?

03-09-2018, 16:34	#3 (permalink)
ivanych79 Freak Poster Join Date: May 2006 Location: A Posts: 162 Member: 272591 Status: Offline Sonork: 100.1579461 Thanks Meter: 45	if you replace memory from this manual will not be of use. since the GP1 partition will be empty.