CMT 2nd Boot CERT Mismatch / ERR: CMT ALG Boot CERT MISM Issue: ------
Nokia phones give error:
"ERR: CMT ALG Boot CERT MISM" or "CMT 2nd Boot CERT Mismatch" on "Check" or "Flash" Problem: --------
Some UFS manufacturers used a National LP2951C M33 (3.3V) regulator, instead of a LP2951C M30 (3.0V) regulator (IC - U6) Workaround: -----------
Change regulator to LP2951C M30 If you are 100% sure that your UFS has the correct regulator of M30 and you have checked the output using a voltage meter, you should then check the phones hardware.
Last edited by Odia The Ultimate; 02-02-2010 at 15:34.
|