Quote:
Originally Posted by melgsm same proplem stay cannot detected
phone take drivers ok
but software can't detect for flash or for jl-cmder |
What to do next if Jl Cmder will not connect and wipe ??
Disconnect the device from the PC
Download and install Desktop Manager and the Handheld OS to the PC (if they have not already been installed):
Flow these 1. Start a Command Prompt in DOS from the PC (Start >> All Programs >> Accessories >> Command Prompt)
2. Change the directory to: C:\Program Files\Common Files\Research In Motion\AppLoader
If you do not know how to navigate to this directory follow instructions in 2a)
Quote:
2a)
From C:\ prompt type:
cd Program Files <hit enter>
cd Common Files <hit enter>
cd Research In Motion <hit enter>
cd AppLoader <hit enter>
|
3. Make sure Desktop Manager is not running
4. Connect BlackBerry to the PC
5. Enter the following command in the Command Prompt window:
Installation
1. The Application Loader Wizard window will open
2. Click on Next
3. You will get a drop down list with the COM ports and one USB port entry
4. Select the one which says USB:UNKNOWN
If you do not see USB:UNKNOWN or USB:BBPIN, then follow instructions listed in a1-a5:
a1) Disconnect the device from the PC.
a2) Keep the Application Loader Wizard window open
a3) Remove the battery and put it back
a4) While the red led is on, reconnect the device to the PC. The led will only stay on for a few seconds
a5) When USB:UNKNOWN appears in the drop down list, you need to immediately select Next
5. The loader should now connect to your device and you will be able to reinstall the OS br
::.::RAMJAN::.::