GSM-Forum - View Single Post - help with pinout for CECT KA08 mini iphone clone

shimi77 · 07-03-2009, 15:09

Here is ka08 flash firmware file .

http://www.filefactory.com/file/aha66dh/n/ka08-16_bin

I used the mtk flash tool to read the phone.
Used modified USB to serial cable with 2303hxc chip .
The pinout that I used is :

RX – 3
TX – 4
GND -9

07-03-2009, 15:09	#8 (permalink)
shimi77 Junior Member Join Date: Jan 2006 Posts: 25 Member: 226402 Status: Offline Thanks Meter: 6	Ka08 firmware file Here is ka08 flash firmware file . http://www.filefactory.com/file/aha66dh/n/ka08-16_bin I used the mtk flash tool to read the phone. Used modified USB to serial cable with 2303hxc chip . The pinout that I used is : RX – 3 TX – 4 GND -9