FTD/NetMonitor - Page 40 - GSM-Forum

KPbICMAH · 10-10-2008, 07:57

Quote:

Originally Posted by mg70brz

the problem isnot appears any function of netmonitor

You mean you don't get FTD at all? This is weird. Maybe you are flashing the phone in a wrong way? Here, try this file. It contains FTD-enabled MCU, original MCU, PPM and CNT "en" (Central Asia) version 5.23 for 1200 (rh-99). Try flashing your 1200 with these and see if it works. These files I personally tested on many phones and didn't have any problems with signal or FTD. So either they will work for you, or you are doing smth. wrong.

LeoTH · 10-10-2008, 20:12

Quote:

Originally Posted by KPbICMAH

I have personally enabled FTD in a number of 1200, 1208 phones and not a single soul complained about this kind of problems.

Please upload you MCU-enabled-FTD for Nokia 1208 (RH-105)!

My attempt with DCT4 NetMonitor Patcher is no result...

Пожалуйста...

KPbICMAH · 10-11-2008, 07:31

Quote:

Originally Posted by LeoTH

Please upload you MCU-enabled-FTD for Nokia 1208 (RH-105)! Пожалуйста...

Всегда пожалуйста!

lxn833 · 11-01-2008, 07:03

Can someone send FTD patched MCU for 2630？
thanks！

KPbICMAH · 11-03-2008, 15:09

Quote:

Originally Posted by lxn833

Can someone send FTD patched MCU for 2630?
thanks!

Try http://rapidshare.com/files/16024717...2630ej0562.rar - as I don't have a phone to test on, the file contains two versions of MCU, one or the other should work.

sanp007 · 11-17-2008, 03:02

Can someone send FTD patched MCU for 1650 RM-305？
thanks！

KPbICMAH · 11-17-2008, 09:33

Quote:

Originally Posted by sanp007

Can someone send FTD patched MCU for 1650 RM-305?
thanks!

http://rapidshare.com/files/16455556...1650en0506.rar - try .v1 and .v2 as MCU, as I don't have the phone to test which patching method works in this case. Also included is the normal MCU and "EN" PPM/CNT (Central Asian languages

) - enjoy!

franky24 · 11-23-2008, 13:41

I tried the flash file at http://evil-hackers.com/FTD/FTD_npl2__06.200.zip, posted here at 25.11.2005 (many thanks for posting!) with following result:

I've got the displays 01-01 to 01-14, 05-01 to 05-02, 06-01 to 06-11 and 07-01 to07-11.

All the other displays missing. I think this is the field test monitor whithout R&D.

On DCT3 phones it is possible to enlarge the Netmonitor to full R&D by entering 243.
242 reduces it to the displays 1 to 19, and 241 disables it permanently. The menu item disappears.

Is there an equivalent code for DCT4 phones. I.e. 6207 disables it permanently. What are the other codes?

Is there an other possibility to enable full Netmonitor on my 6100?

Thanks in Advance

Regards
Franky

sorente · 11-28-2008, 20:34

I have too a 1208, the flash version is v5.23, I will try the firmware, I hope it will work!

mg70brz · 11-28-2008, 22:57

Quote:

Originally Posted by sorente

I have too a 1208, the flash version is v5.23, I will try the firmware, I hope it will work!

if you flash this phone with JAF version 1.98.61 with FTD function enable, its make flash with FTD is OK !!! i have tested on firmware 5.23 , 5.51 and 5.71 and all FTD enable with JAF !

KPbICMAH · 11-29-2008, 10:55

sorente, if you look a few posts above, you will notice LeoTH asking for a ftd mcu for 1208 and me giving a link in response. go figure.

sorente · 11-29-2008, 17:42

Quote:

Originally Posted by KPbICMAH

sorente, if you look a few posts above, you will notice LeoTH asking for a ftd mcu for 1208 and me giving a link in response. go figure.

I reffered to the one you've sent it to LeoTH when I said that I will try the firmware, I have downloaded it too.

By the way, in the .rar archive there are 4 files:
ftd-rh105_05.230
rh105_05.230
rh105_05.23en
rh1050_nai5.23en

which files should I take with me when I will go to the service?

Thanx

KPbICMAH · 12-01-2008, 06:06

sorente, what's wrong with taking all of them?

You will definitely need ftd-rh105_05.230 (FTD-enabled MCU), rh105_05.23en (PPM), and rh1050_nai5.23en (CNT). You will need rh105_05.230 too, if you want to disable FTD for some reason. Unless your service already has the 5.23 version for 1208, then they should have all of these file except the ftd-rh105_05.230.

sorente · 12-01-2008, 07:05

Normaly there wouldn't be nothing wrong, but the service guy is... let's say it isn't as good as others are...
With my 6230i he did a good job, but with 1110i has tried 3 times to rewrite the phone's flash, with no success. Eventualy I 've managed to lost my phone...

CHAUDHRAY ARSHAD · 12-24-2008, 07:49

Quote:

Originally Posted by sorente

Normaly there wouldn't be nothing wrong, but the service guy is... let's say it isn't as good as others are...
With my 6230i he did a good job, but with 1110i has tried 3 times to rewrite the phone's flash, with no success. Eventualy I 've managed to lost my phone...

i did on nokia 2600 fine 2760 . 1680 working fine dnt have 1100 and 6230 to test it

11-28-2008, 20:34	#594 (permalink)
sorente Junior Member Join Date: Jan 2006 Posts: 17 Member: 216575 Status: Offline Thanks Meter: 0	I have too a 1208, the flash version is v5.23, I will try the firmware, I hope it will work! Last edited by sorente; 11-28-2008 at 20:40.

11-01-2008, 07:03	#589 (permalink)
lxn833 Junior Member Join Date: Feb 2007 Posts: 2 Member: 452911 Status: Offline Thanks Meter: 0	Can someone send FTD patched MCU for 2630？ thanks！

11-17-2008, 03:02	#591 (permalink)
sanp007 Junior Member Join Date: Oct 2005 Posts: 17 Member: 189400 Status: Offline Thanks Meter: 2	Can someone send FTD patched MCU for 1650 RM-305？ thanks！

11-23-2008, 13:41	#593 (permalink)
franky24 Junior Member Join Date: Nov 2008 Posts: 1 Member: 907817 Status: Offline Thanks Meter: 0	I tried the flash file at http://evil-hackers.com/FTD/FTD_npl2__06.200.zip, posted here at 25.11.2005 (many thanks for posting!) with following result: I've got the displays 01-01 to 01-14, 05-01 to 05-02, 06-01 to 06-11 and 07-01 to07-11. All the other displays missing. I think this is the field test monitor whithout R&D. On DCT3 phones it is possible to enlarge the Netmonitor to full R&D by entering 243. 242 reduces it to the displays 1 to 19, and 241 disables it permanently. The menu item disappears. Is there an equivalent code for DCT4 phones. I.e. 6207 disables it permanently. What are the other codes? Is there an other possibility to enable full Netmonitor on my 6100? Thanks in Advance Regards Franky

11-29-2008, 10:55	#596 (permalink)
KPbICMAH Freak Poster Join Date: Oct 2003 Age: 49 Posts: 311 Member: 41760 Status: Offline Thanks Meter: 16	sorente, if you look a few posts above, you will notice LeoTH asking for a ftd mcu for 1208 and me giving a link in response. go figure.

12-01-2008, 06:06	#598 (permalink)
KPbICMAH Freak Poster Join Date: Oct 2003 Age: 49 Posts: 311 Member: 41760 Status: Offline Thanks Meter: 16	sorente, what's wrong with taking all of them? You will definitely need ftd-rh105_05.230 (FTD-enabled MCU), rh105_05.23en (PPM), and rh1050_nai5.23en (CNT). You will need rh105_05.230 too, if you want to disable FTD for some reason. Unless your service already has the 5.23 version for 1208, then they should have all of these file except the ftd-rh105_05.230.

12-01-2008, 07:05	#599 (permalink)
sorente Junior Member Join Date: Jan 2006 Posts: 17 Member: 216575 Status: Offline Thanks Meter: 0	Normaly there wouldn't be nothing wrong, but the service guy is... let's say it isn't as good as others are... With my 6230i he did a good job, but with 1110i has tried 3 times to rewrite the phone's flash, with no success. Eventualy I 've managed to lost my phone...