GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > GSM & CDMA Phones / Tablets Software & Hardware Area > Samsung > Samsung Flashers, Software, Firmware.

Samsung Flashers, Software, Firmware. all Universal Software, Flashers, Editors, Unlockers, Secrets codes which support Mutliple Samsung platforms.

Closed Thread
 
LinkBack Thread Tools Display Modes
Old 09-03-2008, 13:37   #1 (permalink)
Junior Member
 
Join Date: Jul 2008
Posts: 27
Member: 825891
Status: Offline
Thanks Meter: 25
Discovered unlock for most samsung and tested!


hey everyone.

i have read a couple of threads i have found on the internet and i have tested this on my samsung sgh-c450 locked to telstra. no computer is needed (or cable). i hope this helps anyone with a samsung. WARNING: ALL CONTACTS AND OTHER SETTINGS MAY BE LOST DURING THIS PROCESS!!!

Method:
Before you start, make sure the battery is charged and all security codes or PIN codes or watever are disabled so we dont have any code prompts interfering with this method.

1. Turn off the mobile phone.
2. Insert a "Non-accepted" SIM card (sim card that wont work) half way in so that when you turn on the phone, it still says "Insert SIM".
3. Turn on the phone.
4. Enter the following code and wait patiently for phone to reset:

*2767*2878#

5. Once reset has completed, the phone will still say "Insert SIM". This is where you need to push the sim card all the way in. You can use a paperclip or a tiny object to push it in if you have difficulty. IT IS IMPORTANT THAT THE PHONE REMAINS ON AT THIS STAGE (TRY NOT TO LET BATTERY FALL OUT) IF BATTERY FALLS OUT, DO NOT PANIC, JUST START FROM STEP 2 AGAIN.
6. Enter the following code and wait patiently for phone to reset:

*2767*3855#

7. After reset is completed, SIM should work and also the reception. Don't get excited, its not unlocked yet.
8. Now we want to make it permanent. First check what locks need to be deactivated with the following code:

*#7465625#

------------------------------------------------------------------------
a)
If Network Lock is "Active", put in the following code:

*7465625*638*00000000*00000000#
Message should be "Network Lock has been personalised" or similar.
Then:

#7465625*638*00000000#
Message should be "Network Lock deactivated" or similar.

------------------------------------------------------------------------
b)
If Subset Lock is "Active", put in the following code:

*7465625*782*00000000*00000000#
Message should be "Subset Lock has been personalised" or similar.
Then:

#7465625*782*00000000#
Message should be "Subset Lock deactivated" or similar.

------------------------------------------------------------------------
c)
If SP Lock is "Active", put in the following code:

*7465625*77*00000000*00000000#
Message should be "SP Lock has been personalised" or similar.
Then:

#7465625*77*00000000#
Message should be "SP Lock deactivated" or similar.

------------------------------------------------------------------------
d)
If CP Lock is "Active", put in the following code:

*7465625*27*00000000*00000000#
Message should be "CP Lock has been personalised" or similar.
Then:

#7465625*27*00000000#
Message should be "CP Lock deactivated" or similar.

------------------------------------------------------------------------
e)
If SIM Lock is "Active", put in the following code:

*7465625*746*00000000*00000000#
Message should be "SIM Lock has been personalised" or similar.
Then:

#7465625*746*00000000#
Message should be "SIM Lock deactivated" or similar.

------------------------------------------------------------------------

"a)" is the common one that usually is the only one need to be done but if other locks are active, i think its best to disable them now while you have the chance.

Now you have unlocked your phone!

Tested on:
SGH-C450

Please test this!

Thank You.
 
The Following 17 Users Say Thank You to bboyzahid For This Useful Post:
Show/Hide list of the thanked
Old 09-03-2008, 13:41   #2 (permalink)
No Life Poster
 
y3kt's Avatar
 
Join Date: Feb 2006
Location: Club-Berry
Posts: 1,938
Member: 238127
Status: Offline
Sonork: 100.1574867
Thanks Meter: 3,526
Donate money to this user
this is old news buddy, luck
 
Old 09-03-2008, 13:43   #3 (permalink)
Junior Member
 
Join Date: Jul 2008
Posts: 27
Member: 825891
Status: Offline
Thanks Meter: 25
lol

just if anyone needs a clear guide =P
 
Old 09-04-2008, 09:21   #4 (permalink)
Junior Member
 
Join Date: Jul 2008
Posts: 27
Member: 825891
Status: Offline
Thanks Meter: 25
if this method has worked for you, please tell us the model you unlocked.

thanks.
 
Old 09-04-2008, 10:07   #5 (permalink)
No Life Poster
 
jepetu's Avatar
 
Join Date: Sep 2005
Location: Havana, CUBA
Posts: 2,259
Member: 181633
Status: Offline
Thanks Meter: 727
Donate money to this user
@bboyzahid

Old method nothing new it works with sysol and trident platforms.

Just a hint, suppress *2767*2878# step because your imei wil go to hell (it will become 000000000000000).
 
The Following User Says Thank You to jepetu For This Useful Post:
Old 09-04-2008, 10:44   #6 (permalink)
Junior Member
 
Join Date: Jul 2008
Posts: 27
Member: 825891
Status: Offline
Thanks Meter: 25
UPDATED GUIDE!! PLEASE READ
Quote:
Originally Posted by bboyzahid View Post
hey everyone.

i have read a couple of threads i have found on the internet and i have tested this on my samsung sgh-c450 locked to telstra. no computer is needed (or cable). i hope this helps anyone with a samsung. WARNING: ALL CONTACTS AND OTHER SETTINGS MAY BE LOST DURING THIS PROCESS!!!

Method:
Before you start, make sure the battery is charged and all security codes or PIN codes or watever are disabled so we dont have any code prompts interfering with this method.

1. Turn off the mobile phone.
2. Insert a "Non-accepted" SIM card (sim card that wont work) half way in so that when you turn on the phone, it still says "Insert SIM".
3. Turn on the phone.
4. The phone will still say "Insert SIM". This is where you need to push the sim card all the way in. You can use a paperclip or a tiny object to push it in if you have difficulty. IT IS IMPORTANT THAT THE PHONE REMAINS ON AT THIS STAGE (TRY NOT TO LET BATTERY FALL OUT) IF BATTERY FALLS OUT, DO NOT PANIC, JUST START FROM STEP 2 AGAIN.
5. Enter the following code and wait patiently for phone to reset:

*2767*3855#

6. After reset is completed, SIM should work and also the reception. Don't get excited, its not unlocked yet.
8. Now we want to make it permanent. First check what locks need to be deactivated with the following code:

*#7465625#

------------------------------------------------------------------------
a)
If Network Lock is "Active", put in the following code:

*7465625*638*00000000*00000000#
Message should be "Network Lock has been personalised" or similar.
Then:

#7465625*638*00000000#
Message should be "Network Lock deactivated" or similar.

------------------------------------------------------------------------
b)
If Subset Lock is "Active", put in the following code:

*7465625*782*00000000*00000000#
Message should be "Subset Lock has been personalised" or similar.
Then:

#7465625*782*00000000#
Message should be "Subset Lock deactivated" or similar.

------------------------------------------------------------------------
c)
If SP Lock is "Active", put in the following code:

*7465625*77*00000000*00000000#
Message should be "SP Lock has been personalised" or similar.
Then:

#7465625*77*00000000#
Message should be "SP Lock deactivated" or similar.

------------------------------------------------------------------------
d)
If CP Lock is "Active", put in the following code:

*7465625*27*00000000*00000000#
Message should be "CP Lock has been personalised" or similar.
Then:

#7465625*27*00000000#
Message should be "CP Lock deactivated" or similar.

------------------------------------------------------------------------
e)
If SIM Lock is "Active", put in the following code:

*7465625*746*00000000*00000000#
Message should be "SIM Lock has been personalised" or similar.
Then:

#7465625*746*00000000#
Message should be "SIM Lock deactivated" or similar.

------------------------------------------------------------------------

"a)" is the common one that usually is the only one need to be done but if other locks are active, i think its best to disable them now while you have the chance.

Now you have unlocked your phone!

Tested on:
SGH-C450

Please test this!

Thank You.
i was also wondering if the imei is needed? coz i unlocked sgh-c450. will the phone still be ok?
 
Old 09-06-2008, 09:19   #7 (permalink)
Junior Member
 
Join Date: Sep 2008
Posts: 2
Member: 854982
Status: Offline
Thanks Meter: 1
hi bboy zahid. i follow all your step for my samsung gsh c450 it all worked well untill last step when i press #7465625*638*00000000# it says wrong password it's not
Message "Network Lock deactivated". can you help me what to do please thank you so much 4 that
 
The Following User Says Thank You to thuantommy For This Useful Post:
Old 09-06-2008, 09:20   #8 (permalink)
Junior Member
 
Join Date: Sep 2008
Posts: 2
Member: 854982
Status: Offline
Thanks Meter: 1
please reply my asap thank you s much bboy ahid
 
Old 09-06-2008, 10:05   #9 (permalink)
Junior Member
 
Join Date: Jul 2008
Posts: 27
Member: 825891
Status: Offline
Thanks Meter: 25
*#7465625#
enter this to check locks and tell me what it says for each lock

e.g.
network lock - active
subset lock - inactive
sp lock .....

it would be a great help if you also describe what you have done

thanks
 
The Following User Says Thank You to bboyzahid For This Useful Post:
Old 09-06-2008, 10:34   #10 (permalink)
Junior Member
 
Join Date: Jul 2008
Posts: 27
Member: 825891
Status: Offline
Thanks Meter: 25
Quote:
Originally Posted by thuantommy View Post
hi bboy zahid. i follow all your step for my samsung gsh c450 it all worked well untill last step when i press #7465625*638*00000000# it says wrong password it's not
Message "Network Lock deactivated". can you help me what to do please thank you so much 4 that
its possible that you might have changed the nck to 9 or more zeroes.

try the method once more, otherwise pm me
 
Old 09-09-2008, 12:49   #11 (permalink)
Junior Member
 
Join Date: Jul 2008
Posts: 27
Member: 825891
Status: Offline
Thanks Meter: 25
tested...

tested on models without "*2767*2878#" step...

SGH-F250 (little bit hard to get SIM card in) IMEI still correct
SGH-E250 IMEI still correct

P.S: Use a paperclip.

also Virgin Mobile, Optus and Boost (Australia Networks) can all be booted on the same samsung if locked either to Virgin Mobile, Optus or Boost. This has been tested on the model SGH-F250
 
Old 09-09-2008, 18:30   #12 (permalink)
Junior Member
 
Join Date: Sep 2008
Posts: 1
Member: 857849
Status: Offline
Thanks Meter: 0
After trying to change sim lock on an e250 with 7465625*746*00000000*00000000# i get a message already personilised and then when puting in #7465625*746*00000000# it says wrong code... phone still sim locked plz help!!!!!!!!!!!!!!!!!!!
 
Old 09-10-2008, 16:47   #13 (permalink)
Insane Poster
 
Join Date: Mar 2008
Posts: 84
Member: 730856
Status: Offline
Thanks Meter: 4
Great work. will test later.
 
Old 09-10-2008, 17:14   #14 (permalink)
No Life Poster
 
Join Date: Nov 2006
Location: philippines
Age: 43
Posts: 509
Member: 389002
Status: Offline
Thanks Meter: 82
Quote:
Originally Posted by bboyzahid View Post
hey everyone.

i have read a couple of threads i have found on the internet and i have tested this on my samsung sgh-c450 locked to telstra. no computer is needed (or cable). i hope this helps anyone with a samsung. WARNING: ALL CONTACTS AND OTHER SETTINGS MAY BE LOST DURING THIS PROCESS!!!

Method:
Before you start, make sure the battery is charged and all security codes or PIN codes or watever are disabled so we dont have any code prompts interfering with this method.

1. Turn off the mobile phone.
2. Insert a "Non-accepted" SIM card (sim card that wont work) half way in so that when you turn on the phone, it still says "Insert SIM".
3. Turn on the phone.
4. Enter the following code and wait patiently for phone to reset:

*2767*2878#

5. Once reset has completed, the phone will still say "Insert SIM". This is where you need to push the sim card all the way in. You can use a paperclip or a tiny object to push it in if you have difficulty. IT IS IMPORTANT THAT THE PHONE REMAINS ON AT THIS STAGE (TRY NOT TO LET BATTERY FALL OUT) IF BATTERY FALLS OUT, DO NOT PANIC, JUST START FROM STEP 2 AGAIN.
6. Enter the following code and wait patiently for phone to reset:

*2767*3855#

7. After reset is completed, SIM should work and also the reception. Don't get excited, its not unlocked yet.
8. Now we want to make it permanent. First check what locks need to be deactivated with the following code:

*#7465625#

------------------------------------------------------------------------
a)
If Network Lock is "Active", put in the following code:

*7465625*638*00000000*00000000#
Message should be "Network Lock has been personalised" or similar.
Then:

#7465625*638*00000000#
Message should be "Network Lock deactivated" or similar.

------------------------------------------------------------------------
b)
If Subset Lock is "Active", put in the following code:

*7465625*782*00000000*00000000#
Message should be "Subset Lock has been personalised" or similar.
Then:

#7465625*782*00000000#
Message should be "Subset Lock deactivated" or similar.

------------------------------------------------------------------------
c)
If SP Lock is "Active", put in the following code:

*7465625*77*00000000*00000000#
Message should be "SP Lock has been personalised" or similar.
Then:

#7465625*77*00000000#
Message should be "SP Lock deactivated" or similar.

------------------------------------------------------------------------
d)
If CP Lock is "Active", put in the following code:

*7465625*27*00000000*00000000#
Message should be "CP Lock has been personalised" or similar.
Then:

#7465625*27*00000000#
Message should be "CP Lock deactivated" or similar.

------------------------------------------------------------------------
e)
If SIM Lock is "Active", put in the following code:

*7465625*746*00000000*00000000#
Message should be "SIM Lock has been personalised" or similar.
Then:

#7465625*746*00000000#
Message should be "SIM Lock deactivated" or similar.

------------------------------------------------------------------------

"a)" is the common one that usually is the only one need to be done but if other locks are active, i think its best to disable them now while you have the chance.

Now you have unlocked your phone!

Tested on:
SGH-C450

Please test this!

Thank You.
i think only those newbie could'nt knew about this..
no new discovery here, its old discovery
but thanks for your effort
 
The Following User Says Thank You to eljhay For This Useful Post:
Old 09-10-2008, 21:25   #15 (permalink)
Junior Member
 
Join Date: Apr 2006
Posts: 10
Member: 267262
Status: Offline
Thanks Meter: 1
yep, now we just need to know how to change our imeis back to normal and were all set
 
The Following User Says Thank You to scottpfc For This Useful Post:
Closed Thread

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
Unlocking for Most Phone Brands including Google Phone (G1) jtaylor06 GSM Mobile Links 0 05-27-2009 14:14
SIEMENS- NO TESTPOINT, NO DISASSEMBLY, NO JAVA Unlock for most models goro_bg DreamBox 0 11-04-2006 11:00
Any hardware solution to solve system failure ust 5.4 for 9 samsung and no results tcteam Samsung Hardware Repair 22 10-23-2004 11:20
Unlock Of All Samsung And Telital only CROATIA G$M solution Main Sales Section 1 03-14-2002 05:49

 



All times are GMT +1. The time now is 13:03.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.28142 seconds with 9 queries

SEO by vBSEO