1.4.2.10 Hack

[jupp0r]

Hi, really great work here guys - too bad things like that will be needed more often in the future (tcpa, drm, etc)

Now my problem:

I'm looking for btwusb.inf device information for my Bluetake BT009V, un fortunately they don't have any drivers available for download anymore so I'm really stuck because no cracked driver recognizes my stick

[Proffa]

I found already hacked files from here:
http://quank.narod.ru/patched_files_for_btw14210sp4.zip (0.69M)
Slow... but works whit these drivers:
ftp://drivers:[email protected]%20CSR.zip (19.2 M)

When the installation asks BT-dongle drivers click next and then copy these files to the right places:

wbtapi.dll
-> C:\windows\system32

BTStackServer.exe
BTTray.exe
-> C:\Program Files\WIDCOMM\Bluetooth-software
(Folder where you installed the soft)

If the copying progress says that "Could not overwrite because the file was in use etc...", then you have to try to replace these files in safe-mode/ms-dos-prompt/uninstall-install again.

Terveiset MPF:n jäsenille

[Phantasm4489]

Originally posted by jupp0r
Hi, really great work here guys - too bad things like that will be needed more often in the future (tcpa, drm, etc)

Now my problem:

I'm looking for btwusb.inf device information for my Bluetake BT009V, un fortunately they don't have any drivers available for download anymore so I'm really stuck because no cracked driver recognizes my stick

use the usbmon software (as I mentioned in the other post about what to do if your bt dongle is still not recognised after cracking the files).

[kewl]

Originally posted by Quank
This patch work with BTW v. 1.4.2.10 service pack 4!

BTW from http://www.mavintec.com/download/usb.zip work fine with my Tecom BT3030

Thanks Phantasm4489! & bluetoothmaster!

Hi,

I was considering upgrading to this version
on my W2K home Pc.
Are you able to use the Headset profile on
BT3030 with any mobile phone?
I want to be able to :
a) Use the audio gateway with my T610
b) Use the Jabra BT200 with the BT3030
for voice chat using Yahoo/MSN/Skype.

Please advise so I could decide whether to upgrade
or not. Current version 1.2.2.16 allows me to do all
other stuff that I need, like Sync with outlook, FTP
themes/ringtones/pics, etc.

Thnx in advance. :-)

[leemperor]

Cheers for all your help guys! To save anyone else the same problems that I had I've written a complete guide in (I hope) plain english. Anyone having difficulties should give it a try!

http://www.jonscaife.com/techhelp/bluetoot.html

[ppan76]

Originally posted by bestcool
ONLT download http://www.mavintec.com/download/usb.zip this driver 1.4.2.10 and change this form crack www.gsmhelp.org/newdownload/1.4.2.10crack.rar

TESTED by me..

This worked like a charm, even for me. Didn't have to do anything but Un-install my previous 1.3.x drivers and then install this one. Everything worked perfectly. Thanks

[feedmeastraycat]

I just want to thank all the people who worked on this problem. Using the belkin drivers (F8T001_V2. EXE) and the 1.4.2.10crack.rar i was able to get my Hawking Tech H-BT10U to work with my SE P900. Finally! Cheers everyone.

[wazh]

Worked great, just wanted to say thanks to all you guys who have worked on it :-)

Using a 6600 and cheap and cheerful blue monkey usb dongle

Thanks again.

Regards..

[steinmi]

Originally posted by bestcool
ONLT download http://www.mavintec.com/download/usb.zip this driver 1.4.2.10 and change this form crack www.gsmhelp.org/newdownload/1.4.2.10crack.rar

TESTED by me..

I run an Acer TM 804 Notebook, a Logitech Cordless Presenter (a much to expensive bluetooth mouse with additional functionality for presenting with Power Point including Laserpointer)

Still ACER is delivering their TM 800 series with Widcomm 1.3.2.7 not supporting bluetooth mice (HID profile) and other useful profiles. And still Acer is replying on support calls they are testing the new version and will release shortly the 1.4.x Version.

The Cordless Presenter is delivered with an USB Stick and not with a hub as for the MX900 Mouse. The software is as well different. It is coming with the usual MOUSEWARE (Version 9.79) and not with the SETPOINT software of the MX900.
I believe the delivered USB Bluetooth stick is just a normal bluetooth stick supporting all the profiles - depending on the software! However, the MOUSEWARE software is only creating a HID profile in the device manager without any other bluetooth functionality.

Of course I wanted to use the internal bluetooth device - which in fact should be the same equipment as the external BT500 USB stick.

I used the above mentioned thread and it works perfectly !! Thanks to your work.

I installed the 1.4.2.10 Version and just when the system was waiting for the bluetooth device to start I copied the hacked files into the corresponding folders (as mentioned above). I only had to download a software to unpack the hacked files as mine was not able to make it (I used WINACE).

What surprised me at the most:
The Logitech Cordless Presenter is nearly working without any failure. All buttons are working, whether in MOUSE-mode or in PRESENTER-mode!

The only problem is that the Cordless Presenter is not automatically bonded into the system after a new start. May be it is because I cannot pair it ? Is it at all possible or necessary to pait HID devices ?

Now I will work on synchronizing my iPAQ 3870 whrere I still have problems. I hope this is just related to my missing cleverness and not because of the hacked Widcomm.

[w-k-pieters]

You should pair it, because otherwise it won't be possible to automatic reconnect @ a reboot. But when initiating pairing you should not give in a code, and viola it works perfectly. Good luck...

[steinmi]

Pretty smart !! Its working.
Many thanks for your help !

[booyoo]

I can confirm belkin + crack works fine with trendnet TBW-101UB

Thanks to all !

[bigcat]

I have the belkin adapter F8T001_v1 (the one with the anthena). I made the windows registry change before running setup, but still it complains about the license.

can somebody post instructions on how to get this one to work on server 2003

[steinmi]

I asked alread in another forum but was not able to get an answer.

Was anybody faced to problems connecting his iPAQ 3870 (or similar equipment with internal BT (PPC 2002, BLuetooth manager 1.1) after he changed from Widcomm 1.3.2.7 to 1.4.x.x ???

My iPAQ is not able to find the services of my Acer notebook TM 804 with internal BT after I updated to Widcomm 1.4.x.x.

Can anybody help ?

[petes]

I have exactly the same problem with my iPaq as Steinmi - I can pair fine, but I can't see the available services on my Dell from the iPaq- worked fine with 1.4.1. Any ideas (or it's downgrade time for me :-(