BE4 restarting when call in progress !! - GSM-Forum

makona · 08-09-2001, 04:21

Hi friends ,

i got this problem in too many phones and i have now about 3 or 4 phones with this problem , when i press call somtimes phone power-off then restarts itself again and in display some hands count then no network in phone !!!

somtimes i press call and ok but when call in progress phone restarts like above ,

somtimes when call in progress if i tried hands-free phone do the same !!!

So , i think its Sw problem so plz tell me what to do !?!??

p.s : in BE4 i can't flash phone with full flash and phone works without checksim ( like be1 , be3 ) ...

hmmmmm , i hope u understand me friends ,

help me plz

 Best Regards

sloba · 08-09-2001, 07:13

i have 10 pieces that do the same.100% sure it`s not a software problem.units were droped.i suspect faulty pcb or TWL2212.anyway try to reflow with hot air.i have repaired some of them but don`t ask me how.

Mtelko · 08-09-2001, 13:23

I have 5 be4 v.137 whit same problem...after unlock phone is dead...when you flash it you get this problem (power of, etc.)...

I tested GSMBoy flasher (v11, v12, v13, v14)...flash readed from v11-13 is not same like whit v14!???), so I think is problem, because flasher don't write flash correct...

Regards,

Marian

P.S. Sorry for my English..

makona · 08-09-2001, 23:30

Hi ,

i think we need more info's .. more replied cuz i still doubt if itsn't HW problem !!

ok , plz GUYS I NEED BE4 REPAIRER BY EMSI ...

i tried to get it from <a href="http://www.afilip.3web.cz/" rel="nofollow" target="_blank">http://www.afilip.3web.cz/</a>

but link is down <img src="frown.gif" border="0">

i hope that anyone can upload it to <a href="http://www.kturn.com" rel="nofollow" target="_blank">www.kturn.com</a> account ...

best regards

Mtelko · 08-10-2001, 09:56

You can't repair whit EMSI if you flash phone whit other flash...EMSI work only whit original flash (like: when you try to unlock phone and phone is dead, you backup flash and repair...).

If you need EMSI repair I will send you...

Regards,

Marian

***Pandemonio100*** · 08-10-2001, 11:25

It's an Hardware problem from BGA chip. <img src="wink.gif" border="0">

makona · 08-10-2001, 18:13

Mtelko : i know that, and i need this Sw to repair some dead phones with orig flash also to try with this restarting phone cuz they r too have orig flash .

but pande100 said its hw problem and i think he confirmed this ...

so its Hw problem .

Metlko : plz send me it but via ww.kturn.com or <a href="http://www.freedrive.com" rel="nofollow" target="_blank">www.freedrive.com</a> account cuz my email can't get this file . and this servers is faster .

Best Regards

misel · 08-13-2001, 20:33

I discover this problem ,,many phones comes in my service with same problem ,,PTWL (TWL) BGA power processor is problem ,,but it is very hard to find new ,, change it and phone works fine ,,BGA tool is required also for repairing

makona · 08-14-2001, 05:45

Hi ,

Still Need Be4 Repairer by EMSI ...

help me guys !

hey EMSI .. where r u man ? where i can find your SW !?

Mtelko · 08-14-2001, 07:49

I upload EMSI repair on <a href="http://www.kturn.com" rel="nofollow" target="_blank">KTURN</a>... mtelko.

Regards,

Marian

[quote]Originally posted by meshoz: Hi ,

Still Need Be4 Repairer by EMSI ...

help me guys !

hey EMSI .. where r u man ? where i can find your SW !?<hr></blockquote>

hacker1gsm · 08-22-2001, 05:28

hi all i have EMSI for repiar be4 and have another soft butter than it if any one need it replay

regards mabuzade@hotmail.com

emsi · 08-22-2001, 08:11

Hello every1,

I am working hard, and I am not alone to make a total service for BE4, but it's not so easy as it seemed to me when I make my first repair soft.

If u do not have an original backup, u can't use my soft, so try to use a repair soft by MCOMM.

Take care,

EMSI

08-09-2001, 04:21	#1
makona No Life Poster Join Date: Nov 2000 Location: EGYPT Age: 30 Posts: 1,125 Member: 2583 Status: Offline Sonork: 100.88702 Thanks: 8 Thanked 83 Times in 21 Posts	BE4 restarting when call in progress !! Hi friends , i got this problem in too many phones and i have now about 3 or 4 phones with this problem ,<br />when i press call somtimes phone power-off then restarts itself again and in display some hands count then no network in phone !!! somtimes i press call and ok but when call in progress phone restarts like above , somtimes when call in progress if i tried hands-free phone do the same !!! So , i think its Sw problem so plz tell me what to do !?!?? p.s : in BE4 i can't flash phone with full flash and phone works without checksim ( like be1 , be3 ) ... hmmmmm , i hope u understand me friends , help me plz <br />Best Regards

08-10-2001, 18:13	#7
makona No Life Poster Join Date: Nov 2000 Location: EGYPT Age: 30 Posts: 1,125 Member: 2583 Status: Offline Sonork: 100.88702 Thanks: 8 Thanked 83 Times in 21 Posts	Mtelko : <br />i know that, and i need this Sw to repair some dead phones with orig flash also to try with this restarting phone cuz they r too have orig flash . but pande100 said its hw problem and i think he confirmed this ... so its Hw problem . Metlko : <br />plz send me it but via ww.kturn.com or <a href="http://www.freedrive.com" rel="nofollow" target="_blank">www.freedrive.com</a> account cuz my email can't get this file . and this servers is faster . Best Regards

08-14-2001, 07:49	#10
Mtelko Freak Poster Join Date: Sep 2000 Location: Slovenia, EU Age: 45 Posts: 204 Member: 2202 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	I upload EMSI repair on <a href="http://www.kturn.com" rel="nofollow" target="_blank">KTURN</a>... mtelko. Regards, Marian [quote]Originally posted by meshoz:<br /><strong>Hi , Still Need Be4 Repairer by EMSI ... help me guys ! hey EMSI .. where r u man ? where i can find your SW !?</strong><hr></blockquote>

08-22-2001, 05:28	#11
hacker1gsm No Life Poster Join Date: Jul 2001 Location: EGYPT Posts: 901 Member: 5113 Status: Online Thanks: 1 Thanked 2 Times in 2 Posts	hi all<br />i have EMSI for repiar be4 and have another soft butter than it <br />if any one need it replay regards mabuzade@hotmail.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-09-2001, 07:13	#2
sloba Freak Poster Join Date: Nov 1999 Location: Novi Sad Age: 38 Posts: 185 Member: 685 Status: Offline Thanks: 0 Thanked 1 Time in 1 Post	i have 10 pieces that do the same.100% sure it`s not a software problem.units were droped.i suspect faulty pcb or TWL2212.anyway try to reflow with hot air.i have repaired some of them but don`t ask me how.

08-09-2001, 13:23	#3
Mtelko Freak Poster Join Date: Sep 2000 Location: Slovenia, EU Age: 45 Posts: 204 Member: 2202 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	I have 5 be4 v.137 whit same problem...after unlock phone is dead...when you flash it you get this problem (power of, etc.)... I tested GSMBoy flasher (v11, v12, v13, v14)...flash readed from v11-13 is not same like whit v14!???), so I think is problem, because flasher don't write flash correct... Regards, Marian P.S. Sorry for my English..

08-09-2001, 23:30	#4
makona No Life Poster Join Date: Nov 2000 Location: EGYPT Age: 30 Posts: 1,125 Member: 2583 Status: Offline Sonork: 100.88702 Thanks: 8 Thanked 83 Times in 21 Posts	Hi , i think we need more info's .. more replied cuz i still doubt if itsn't HW problem !! ok , plz GUYS I NEED BE4 REPAIRER BY EMSI ... i tried to get it from <a href="http://www.afilip.3web.cz/" rel="nofollow" target="_blank">http://www.afilip.3web.cz/</a> but link is down <img src="frown.gif" border="0"> i hope that anyone can upload it to <a href="http://www.kturn.com" rel="nofollow" target="_blank">www.kturn.com</a> account ... best regards

08-10-2001, 09:56	#5
Mtelko Freak Poster Join Date: Sep 2000 Location: Slovenia, EU Age: 45 Posts: 204 Member: 2202 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	You can't repair whit EMSI if you flash phone whit other flash...EMSI work only whit original flash (like: when you try to unlock phone and phone is dead, you backup flash and repair...). If you need EMSI repair I will send you... Regards, Marian

08-10-2001, 11:25	#6
*Pandemonio100* Super Moderator Join Date: Feb 2001 Location: ITALY Age: 37 Posts: 2,995 Member: 3381 Status: Offline Thanks: 28 Thanked 289 Times in 63 Posts	It's an Hardware problem from BGA chip. <img src="wink.gif" border="0">

08-13-2001, 20:33	#8
misel No Life Poster Join Date: Apr 2000 Location: near you Age: 46 Posts: 564 Member: 1196 Status: Offline Thanks: 0 Thanked 1 Time in 1 Post	I discover this problem ,,many phones comes in my service with same problem ,,PTWL (TWL) BGA power processor is problem ,,but it is very hard to find new ,, change it and phone works fine ,,BGA tool is required also for repairing

08-14-2001, 05:45	#9
makona No Life Poster Join Date: Nov 2000 Location: EGYPT Age: 30 Posts: 1,125 Member: 2583 Status: Offline Sonork: 100.88702 Thanks: 8 Thanked 83 Times in 21 Posts	Hi , Still Need Be4 Repairer by EMSI ... help me guys ! hey EMSI .. where r u man ? where i can find your SW !?

08-22-2001, 08:11	#12
emsi Insane Poster Join Date: Apr 2001 Posts: 95 Member: 4393 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Hello every1, I am working hard, and I am not alone to make a total service for BE4, but it's not so easy as it seemed to me when I make my first repair soft. If u do not have an original backup, u can't use my soft, so try to use a repair soft by MCOMM. Take care, EMSI