T610 photo problem??? - GSM-Forum

NELIX · 03-11-2004, 03:37

I have T610 with photo problem, well, when i start camera it work ok but when i take the picture it display please wait and when it should store the picture it just take me back to MENU. i tried software with SE fighter, AVR, ARM, Total gdfs repair but still the same. Anyone have the idea about some hardware problem....
thanks........

SFlood · 03-11-2004, 09:07

check camera connector first

NELIX · 03-12-2004, 01:28

oooo thats what i call reply, give me some good information please, i allready checked connector, camera......

thanks anyway

ericspain · 03-13-2004, 01:13

The solutions is check conector camera, clean contacts and ensambled mobile. easy!

ReviveR · 03-13-2004, 14:24

Check camera interface IC, under the camera...

Mobile2001 · 03-13-2004, 18:07

I have same problem with more than two t610. Have resoldered connector, replaced with another phones working camera to no avail. Someone told me that there was a solution to this problem posted last year. But I cannot find solution in the threads. It has something to do with resetting the phone and afterwards doing a sequence of key strokes to enable workaround.
Hope somebody remembers this solution and post it again.

GOGI · 03-15-2004, 10:51

Let try to resoldering IC in attach picture.

Mobile2001 · 03-15-2004, 13:55

Gogi
I will try your solution.

regards and tnx

SFlood · 03-16-2004, 10:43

Quote:

Originally Posted by GOGI

Let try to resoldering IC in attach picture.

IC in that picture is ARM CPU. Useless for camera repairs.

Mobile2001 · 03-16-2004, 15:10

I have also tried resoldering and also replacing epson chip (silver with green boarder) to no avail.
Has anybody tried flashing with emma2.

GOGI · 03-17-2004, 14:46

Yes, That is ARM CPU for control ARM flash. Logic thinking after take picture, It need to save picture some where in phone. It have 2 IC chip can do (AVR or ARM) I test with good unit by take out this CPU then phone have message "Please wait" after take picture. I success to repair 2 set by reball this cpu. Thk.

Mobile2001 · 03-17-2004, 17:30

Thanks again for the info. Will advise if sucessfull.

Regards again.

cchiou · 04-22-2004, 13:18

Quote:

Originally Posted by GOGI

Yes, That is ARM CPU for control ARM flash. Logic thinking after take picture, It need to save picture some where in phone. It have 2 IC chip can do (AVR or ARM) I test with good unit by take out this CPU then phone have message "Please wait" after take picture. I success to repair 2 set by reball this cpu. Thk.

i have a problem with my t6100 camera... i take a photo .. and it freezes and says pls wait for ages.... wat could be the problme?? pls pm me on [email protected]

abdoulaye · 04-22-2004, 13:27

i had the same problem contact me
for me work perfect

fofesz · 06-10-2004, 22:01

@abdoulaye
what did u do with the phone to revive camera?

03-11-2004, 03:37	#1 (permalink)
NELIX Freak Poster Join Date: Jul 2003 Location: Montenegro Posts: 219 Member: 34093 Status: Offline Thanks Meter: 12	T610 photo problem??? I have T610 with photo problem, well, when i start camera it work ok but when i take the picture it display please wait and when it should store the picture it just take me back to MENU. i tried software with SE fighter, AVR, ARM, Total gdfs repair but still the same. Anyone have the idea about some hardware problem.... thanks........

03-17-2004, 14:46	#11 (permalink)
GOGI Major Poster Join Date: Feb 2001 Location: Hell Posts: 44 Member: 3258 Status: Offline Thanks Meter: 0	Yes, That is ARM CPU for control ARM flash. Logic thinking after take picture, It need to save picture some where in phone. It have 2 IC chip can do (AVR or ARM) I test with good unit by take out this CPU then phone have message "Please wait" after take picture. I success to repair 2 set by reball this cpu. Thk. Last edited by GOGI; 03-17-2004 at 15:07.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
samsung p510 photo problem	ecs-gsm	Twisterflasher	0	11-25-2005 14:23
samsung p510 photo problem	ecs-gsm	HWK	0	11-25-2005 14:21
d500 1 will only work with charger, 1 keeps crashing and 2 photo problem	Foneshack	Samsung Hardware Repair	0	08-17-2005 14:16
T610 photo storage problem, help!	oxc61	Sony Ericsson	3	12-21-2004 19:55
T610 photos transfer via IrDA	usernome	Sony Ericsson	2	12-10-2004 13:07

03-11-2004, 09:07	#2 (permalink)
SFlood No Life Poster Join Date: May 1999 Location: RU Posts: 906 Member: 83 Status: Offline Thanks Meter: 1	check camera connector first

03-12-2004, 01:28	#3 (permalink)
NELIX Freak Poster Join Date: Jul 2003 Location: Montenegro Posts: 219 Member: 34093 Status: Offline Thanks Meter: 12	oooo thats what i call reply, give me some good information please, i allready checked connector, camera...... thanks anyway

03-13-2004, 01:13	#4 (permalink)
ericspain Junior Member Join Date: Nov 2003 Location: SPAIN Age: 44 Posts: 4 Member: 44729 Status: Offline Thanks Meter: 0	The solutions is check conector camera, clean contacts and ensambled mobile. easy!

03-13-2004, 14:24	#5 (permalink)
ReviveR No Life Poster Join Date: Oct 2002 Location: Novi Sad, Serbia Age: 44 Posts: 1,343 Member: 17193 Status: Offline Thanks Meter: 16	Check camera interface IC, under the camera...

03-13-2004, 18:07	#6 (permalink)
Mobile2001 Freak Poster Join Date: Nov 2001 Location: Asia Posts: 180 Member: 7650 Status: Offline Thanks Meter: 2	I have same problem with more than two t610. Have resoldered connector, replaced with another phones working camera to no avail. Someone told me that there was a solution to this problem posted last year. But I cannot find solution in the threads. It has something to do with resetting the phone and afterwards doing a sequence of key strokes to enable workaround. Hope somebody remembers this solution and post it again.

03-15-2004, 13:55	#8 (permalink)
Mobile2001 Freak Poster Join Date: Nov 2001 Location: Asia Posts: 180 Member: 7650 Status: Offline Thanks Meter: 2	Gogi I will try your solution. regards and tnx

03-16-2004, 15:10	#10 (permalink)
Mobile2001 Freak Poster Join Date: Nov 2001 Location: Asia Posts: 180 Member: 7650 Status: Offline Thanks Meter: 2	I have also tried resoldering and also replacing epson chip (silver with green boarder) to no avail. Has anybody tried flashing with emma2.

03-17-2004, 17:30	#12 (permalink)
Mobile2001 Freak Poster Join Date: Nov 2001 Location: Asia Posts: 180 Member: 7650 Status: Offline Thanks Meter: 2	Thanks again for the info. Will advise if sucessfull. Regards again.

04-22-2004, 13:27	#14 (permalink)
abdoulaye No Life Poster Join Date: Oct 2003 Location: senegal (dakar)mali/guinee/mauritanie[KANDJI ET FRERES] Age: 42 Posts: 1,057 Member: 41375 Status: Offline Thanks Meter: 7	i had the same problem contact me for me work perfect

06-10-2004, 22:01	#15 (permalink)
fofesz No Life Poster Join Date: Feb 2003 Location: Hungary Age: 40 Posts: 524 Member: 22869 Status: Offline Thanks Meter: 132	@abdoulaye what did u do with the phone to revive camera?