Twister finally - FREE ! - GSM-Forum

Bph&co · 05-22-2004, 00:18

Hi,

Sorry i have to do step by step, but there are too many files, i find it difficult
to organize them properly.

Here they are:

1. Twister version M, with removed X protector

2. Original Hex extracted from some old version box, you dont need to
be rocket scientist to make it to work with latest version, don't worry.

3. Eeprom from the original device where the above code was extracted.

4. Here the fuse settings:

ATmega8 in DIP28
LB1/2: Yes/Yes
BLB01/02: No/No
BLB11/12: Yes/Yes
Fuse high: 11001000
Fuse low: 11101110

5. Ok here some old .idc file for better understanding of the bootloader,
probably old too.

6. Here the twister device code in .hex, probably old version, will try to
get you the latest tommorow morning.

7. This s_hit here must be the Xilinx chip code ( sorry, never had time
to check it out).

8. Ok here the .pcb, extract it and you shoud get a Twister.ddb -
if you have a Protel installed, this is what you need. If doesnt work-
a fix tommorow.

9. Here some quick source code that shows how to calculate the
Flash and Eeprom data so you home made device willl work with latest
Twister versions.

10. Here the N version , only partially unpacked. Ok for disasembly, but
not to be run.

/************************************************** */

Best Regards
Prodigy Duraks

PS:

First:

- sorry to Alan - with providing us with some of the files for free. Please dont
be angry. Respect

- Thanks to all guys who contributed to this - by disasembly or unpacking
the evil Xprotector, i will mention your names only if you want.

Chawkiz_gsm · 05-22-2004, 00:37

thx thx thx thx good good

need pcb schematc

Bph&co · 05-22-2004, 00:40

Yeah,

Just one minute, 600 Mb of files, take time to transfer via my Wifi.

BR

cmk · 05-22-2004, 00:55

i dont think is good news in GSM business

break the war ,please!

mountgsm · 05-22-2004, 01:16

Bad links:
http://www.b-phreaks.co.uk/Downloads...BootLoader.idc
http://www.b-phreaks.co.uk/Downloads...mega8LUFS2.HEX
http://www.b-phreaks.co.uk/Downloads...032XL_UFS2.jed

Bph&co · 05-22-2004, 02:01

sorry for wrong links, will try to fix them as fast as possible.

BR

Moviltuning · 05-22-2004, 02:15

downloading

Many Thanks

Bph&co · 05-22-2004, 03:25

Hi,

Here another one,

To calculate activation strings

And in case you own a factory in China and want to make clones, please
send us a private mails for free support.

Best Regards

cmk · 05-22-2004, 03:32

G O D!

I test it, its really work!

the twister will be end

Bph&co · 05-22-2004, 03:34

Tomorrow, there will be a new update - a tool to build the serial numbers in FTDI eeprom, Atmega MCU, activation for the cloned twister to work on all programs and activation for the latest versions protected with X-Protector.

Bph&co · 05-22-2004, 03:41

Hi,

Sorry to waste you time,

Just few reasons:

1. There was this product - Neelix 2. It was developed by 2 proper companies -
JIC Electronics UK LTD and Digitec Netherlands , it was cracked and cloned by
f_ucking lamers - Raskal and Saras( Saras Sofr ??? WTF ??? Legal company in
Lithuania ??? You must be jockng).

No point to mentione Griffin or Prodigy - you know the story. But the moral is -
dont try to be a a big shot if you are f_ucking tramp. You dont know what
miight fall on your head.

BR

Zloy · 05-22-2004, 03:42

Many Thanks
need pcb schematc

Bph&co · 05-22-2004, 03:55

Hi,

Another file:

decrypted Twister2.5.FBI file - converted to bin

Best Regards

Bph&co · 05-22-2004, 04:10

Ok.

Enough for now. The rough rider ( Daniel) is comming tommorow for some more
action. Expect some more cool downloads.

BR.
Duraks Team

nonu_don · 05-22-2004, 04:24

BAD FOR BUSINESS!!
really bad.

@Bph&co.
i know raskal have been involved in many projects till now, but he had never taken this step of putting hex for free. it would have been equal if you would have manufactured clone boxes and sell them, or even sell the hex... but this is really BAD for BIZ!!..

Ragrds.

05-22-2004, 00:18	#1 (permalink)
Bph&co No Life Poster Join Date: Feb 2000 Location: UK Posts: 3,186 Member: 1024 Status: Offline Thanks Meter: 5,510	Twister finally - FREE ! Hi, Sorry i have to do step by step, but there are too many files, i find it difficult to organize them properly. Here they are: 1. Twister version M, with removed X protector 2. Original Hex extracted from some old version box, you dont need to be rocket scientist to make it to work with latest version, don't worry. 3. Eeprom from the original device where the above code was extracted. 4. Here the fuse settings: ATmega8 in DIP28 LB1/2: Yes/Yes BLB01/02: No/No BLB11/12: Yes/Yes Fuse high: 11001000 Fuse low: 11101110 5. Ok here some old .idc file for better understanding of the bootloader, probably old too. 6. Here the twister device code in .hex, probably old version, will try to get you the latest tommorow morning. 7. This s_hit here must be the Xilinx chip code ( sorry, never had time to check it out). 8. Ok here the .pcb, extract it and you shoud get a Twister.ddb - if you have a Protel installed, this is what you need. If doesnt work- a fix tommorow. 9. Here some quick source code that shows how to calculate the Flash and Eeprom data so you home made device willl work with latest Twister versions. 10. Here the N version , only partially unpacked. Ok for disasembly, but not to be run. /************************************************** / Best Regards Prodigy Duraks PS: First: - sorry to Alan - with providing us with some of the files for free. Please dont be angry. Respect - Thanks to all guys who contributed to this - by disasembly or unpacking the evil Xprotector, i will mention your names only if you want. Last edited by Bph&co; 05-22-2004 at 04:04.*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nokia 7250i CS: solution finally - FREE ! [solution]	Bph&co	Nokia Digital Core Technology 4 ( DCT-4 )	331	03-08-2012 21:33
7250i CS solution finally - FREE ! for Prodigy users	bluelights	Federal One	22	03-20-2006 20:55
Microsnapper, finally FREE!	Sheo	Various	5	08-14-2005 15:52
Datasuite 3.0 Final - Free	GSM Pirate	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	01-18-2000 04:33

05-22-2004, 00:37	#2 (permalink)
Chawkiz_gsm No Life Poster Join Date: Mar 2001 Location: tunisia kairouan Age: 47 Posts: 1,508 Member: 3768 Status: Offline Thanks Meter: 77	thx thx thx thx good good need pcb schematc

05-22-2004, 00:40	#3 (permalink)
Bph&co No Life Poster Join Date: Feb 2000 Location: UK Posts: 3,186 Member: 1024 Status: Offline Thanks Meter: 5,510	Yeah, Just one minute, 600 Mb of files, take time to transfer via my Wifi. BR

05-22-2004, 00:55	#4 (permalink)
cmk No Life Poster Join Date: Mar 2002 Location: Earth Age: 49 Posts: 587 Member: 10387 Status: Offline Thanks Meter: 3	i dont think is good news in GSM business break the war ,please!

05-22-2004, 01:16	#5 (permalink)
mountgsm Junior Member Join Date: Apr 2003 Posts: 23 Member: 25824 Status: Offline Thanks Meter: 0	Bad links: http://www.b-phreaks.co.uk/Downloads...BootLoader.idc http://www.b-phreaks.co.uk/Downloads...mega8LUFS2.HEX http://www.b-phreaks.co.uk/Downloads...032XL_UFS2.jed

05-22-2004, 02:01	#6 (permalink)
Bph&co No Life Poster Join Date: Feb 2000 Location: UK Posts: 3,186 Member: 1024 Status: Offline Thanks Meter: 5,510	sorry for wrong links, will try to fix them as fast as possible. BR

05-22-2004, 02:15	#7 (permalink)
Moviltuning Freak Poster Join Date: Jul 2003 Location: Spain Age: 46 Posts: 164 Member: 34289 Status: Offline Thanks Meter: 1	downloading Many Thanks

05-22-2004, 03:25	#8 (permalink)
Bph&co No Life Poster Join Date: Feb 2000 Location: UK Posts: 3,186 Member: 1024 Status: Offline Thanks Meter: 5,510	Hi, Here another one, To calculate activation strings And in case you own a factory in China and want to make clones, please send us a private mails for free support. Best Regards

05-22-2004, 03:32	#9 (permalink)
cmk No Life Poster Join Date: Mar 2002 Location: Earth Age: 49 Posts: 587 Member: 10387 Status: Offline Thanks Meter: 3	G O D! I test it, its really work! the twister will be end

05-22-2004, 03:34	#10 (permalink)
Bph&co No Life Poster Join Date: Feb 2000 Location: UK Posts: 3,186 Member: 1024 Status: Offline Thanks Meter: 5,510	Tomorrow, there will be a new update - a tool to build the serial numbers in FTDI eeprom, Atmega MCU, activation for the cloned twister to work on all programs and activation for the latest versions protected with X-Protector.

05-22-2004, 03:41	#11 (permalink)
Bph&co No Life Poster Join Date: Feb 2000 Location: UK Posts: 3,186 Member: 1024 Status: Offline Thanks Meter: 5,510	Hi, Sorry to waste you time, Just few reasons: 1. There was this product - Neelix 2. It was developed by 2 proper companies - JIC Electronics UK LTD and Digitec Netherlands , it was cracked and cloned by f_ucking lamers - Raskal and Saras( Saras Sofr ??? WTF ??? Legal company in Lithuania ??? You must be jockng). No point to mentione Griffin or Prodigy - you know the story. But the moral is - dont try to be a a big shot if you are f_ucking tramp. You dont know what miight fall on your head. BR

05-22-2004, 03:42	#12 (permalink)
Zloy Freak Poster Join Date: Mar 2003 Location: Ukraine Age: 48 Posts: 168 Member: 24695 Status: Offline Thanks Meter: 1	Many Thanks need pcb schematc

05-22-2004, 03:55	#13 (permalink)
Bph&co No Life Poster Join Date: Feb 2000 Location: UK Posts: 3,186 Member: 1024 Status: Offline Thanks Meter: 5,510	Hi, Another file: decrypted Twister2.5.FBI file - converted to bin Best Regards

05-22-2004, 04:10	#14 (permalink)
Bph&co No Life Poster Join Date: Feb 2000 Location: UK Posts: 3,186 Member: 1024 Status: Offline Thanks Meter: 5,510	Ok. Enough for now. The rough rider ( Daniel) is comming tommorow for some more action. Expect some more cool downloads. BR. Duraks Team

05-22-2004, 04:24	#15 (permalink)
nonu_don No Life Poster Join Date: Feb 2003 Location: ..::India::.. Age: 40 Posts: 3,809 Member: 22538 Status: Offline Sonork: 100.67180 Thanks Meter: 2,252	BAD FOR BUSINESS!! really bad. @Bph&co. i know raskal have been involved in many projects till now, but he had never taken this step of putting hex for free. it would have been equal if you would have manufactured clone boxes and sell them, or even sell the hex... but this is really BAD for BIZ!!.. Ragrds.