Welcome

[universalbox]

Welcome here dear visitor,

We are the UniversalBox Team, this name is comes from our main project is a real UniversalBox (which is not yet released, because we was busy with our Remote Siemens x65 calculator)
You can find us at http://www.universalbox.com
Please post here all Remote Unlocker & Flasher related questions, suggestions, error reports. If you don't know I tell you shortly that our remote unlocker and flasher currently supports: SonyEricsson K700, K500, F500, S500, Z1010 and Siemens A65, C65, CFX65, CX65, M65, S65, SL65 mobile phones. You can download our software freely after a short signup procedure. Please contact with our dealers to buy credits, because we don't sell credits directly to end users.

Best regards,
UniversalBox Team.

[gorbulas]

Hello,


sounds good.
How about flashing and decustomizing SE Z1010 (CID29 and CID16 EU4) ?


WBR

Markus

[universalbox]

Originally Posted by gorbulas

Hello,


sounds good.
How about flashing and decustomizing SE Z1010 (CID29 and CID16 EU4) ?


WBR

Markus

Soon we make support for all CIDs even for Kxxx and F500, S700
Currently it doest the most recent ones.

No needed information your website all i seen is ''Under Construction'' for about weeks and months ..

[universalbox]

Originally Posted by Araashs

No needed information your website all i seen is ''Under Construction'' for about weeks and months ..

Yes, cause the box not yet released, but you can find information about Remote unlocker and flasher, because that is released. This works like this. Reversing a solution is not 1-2 days, thats why you see under construction about weeks and months.

This works like this ? he he dont understand what you mean about your output for your company profile, but it may be a good solution, which phones does it support or is there any information i can read about the box .. ?

[anna]

Remote unlocker/flasher is working great...i tested 70 times with no problems always online...siemens unlock codes in real time tested with cx65, m65 and s65, k700.
good support too.
thanks

[universalbox]

Originally Posted by Araashs

This works like this ? he he dont understand what you mean about your output for your company profile, but it may be a good solution, which phones does it support or is there any information i can read about the box .. ?

There will be full information in the help section about the box, after we release it. Please post here Remote unlocker and flasher related stuff, because this place is not for the Universal box. Thanks.

[universalbox]

Originally Posted by anna

Remote unlocker/flasher is working great...i tested 70 times with no problems always online...siemens unlock codes in real time tested with cx65, m65 and s65, k700.
good support too.
thanks

Good to see a positive feedback, thanks

[GSM MIND]

Originally Posted by universalbox

Good to see a positive feedback, thanks

man looking great heheh i mean ur universal box me thinking from now that hope to pruchase this box too and also about ur online server


WISH YOU BEST OF LUCK


GSM MIND
STAND ALONE

[evan_silbert]

The x65 solution reads codes or gets them some other way? Is a cable required for this? Please explain your solution to us.

[mohammed]

hi
switch siemens on
conect normal com cable

click ->read codes
after few seconds on screen displayed unlock/security ect
something like
*#0001*12345678#

enter manualy into phone via keypad

[universalbox]

Originally Posted by evan_silbert

The x65 solution reads codes or gets them some other way? Is a cable required for this? Please explain your solution to us.

You have to use a Siemens datacable. This calculator gathers information from the phone, not only the IMEI number but PHONEID too. Thats why you need a cable. We have the solution to calculate the codes, thus we don't lookup in any database. So when your cable is connected you should press the "Get Codes" button. The software sends all gathered information to the server and the calculation begins. Because of the calculation takes time (the server always tells you the estimated time) you should press "Get Codes" button again after the estimated time elapsed. If you have several phones you can connect them to the cable one after another and press "Get Codes" button for each of them. When you have finished with all, you should replug the first one you started with because the codes probably calculated. One calculation takes maximum 5 minutes. Your credit amount won't be decremented when you replug the phones for getting the codes. You can ask your codes as many times as you want.

[universalbox]

Originally Posted by mohammed

hi
switch siemens on
conect normal com cable

click ->read codes
after few seconds on screen displayed unlock/security ect
something like
*#0001*12345678#

enter manualy into phone via keypad

Oh yes, I forgot to tell that the phone must be turned on while you press the "Get Codes" button. Thanks to mohammed for pointing out this.

[evilspell]

Hi,
We have tested this server and it work good with SE and Siemens.
Good luck to the "Universalbox" Team!!!
BR