S500i dead after flash help VsH-GsM - GSM-Forum

_-oRc-_ · 02-07-2006, 21:37

hello

i try too unlock s500i but after direct unlock i get message "locked return for servising" ... sow then i try too flash it but when i've got only this error:

....
Programming flash...
Error : ERR_T00
Operation failed due to an error!

now phone sometimes starts but when he starts has lots of artefacts on screen....

what this mean.... how too repair it...

pls help vsh-gsm

ps phone is new never before use...

wbr
orcgsm

VsH-GsM · 02-07-2006, 22:31

i think you flashed phone with "Repair" option, your phone is repaired, but you have to flash it again without repair option.

_-oRc-_ · 02-07-2006, 23:33

yes... first i try without repair mode but then i do with....
but phone when i write flash with repair mode have this error about 95% procent of complete... but without flashing without repair mode flash ok..
maybe slow down speed.... pls help me...

but when i try too read info.......

VsH-GsM · 02-09-2006, 14:01

i know, with repair may be you get error in last of process, NO PROBLEM AT ALL.

now your phone is 100% ok, rebuild IMEI and well done

_-oRc-_ · 02-09-2006, 15:45

ok i was rebild imei phone power on but he work very very slow and all graphic have lots of artefacts.... how can i solve it... any other solution...

VsH-GsM · 02-09-2006, 15:49

Try another flash file.. may be FW_BUG.

VsH-GsM · 02-09-2006, 15:50

Of Course Without Repair Function Now !!!!

_-oRc-_ · 02-11-2006, 18:08

i try all firmware first flash with rapair option then full reset, imei rebuild, unlock and again flash again but without reapir option and notthing new... phone still runnig up but has lost of artefacts on display and running very very slow...

pls mr vsh-gsm help...

phone is new and can't be a hardware problem...

how can i write full flash (with repair function) .... because allways when i try i get error about 95% nad can't finish it...

VsH-GsM · 02-11-2006, 23:56

Quote:

Originally Posted by _-oRc-_

i try all firmware first flash with rapair option then full reset, imei rebuild, unlock and again flash again but without reapir option and notthing new... phone still runnig up but has lost of artefacts on display and running very very slow...

pls mr vsh-gsm help...

phone is new and can't be a hardware problem...

how can i write full flash (with repair function) .... because allways when i try i get error about 95% nad can't finish it...

error in 95% is NO PROBLEM AT ALL!.
Your problem can be : FLASH FILE PROBLEM (May be you have newer hw in phone) OR HW Problem in phone. THATS all ..!

02-07-2006, 21:37	#1 (permalink)
_-oRc-_ Freak Poster Join Date: Aug 2002 Location: Poland / Kolbuszowa Age: 43 Posts: 409 Member: 14277 Status: Offline Thanks Meter: 2	S500i dead after flash help VsH-GsM hello i try too unlock s500i but after direct unlock i get message "locked return for servising" ... sow then i try too flash it but when i've got only this error: .... Programming flash... Error : ERR_T00 Operation failed due to an error! now phone sometimes starts but when he starts has lots of artefacts on screen.... what this mean.... how too repair it... pls help vsh-gsm ps phone is new never before use... wbr orcgsm

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3510 v3.37 dead after flashing! help help	Tygiel	Nokia Digital Core Technology 4 ( DCT-4 )	2	01-28-2003 13:16
R-220 becomes dead after using the VSH GSM IMEI CHANGER	kingofhearts	VLSI, Conexant, Skyworks and Old Models	13	01-25-2003 21:53
3210 total dead after flashing. Help me! PLEASE!!!	KisaKot	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	11-04-2002 06:09
Max DB 16A - 1MB dead after flash - help	MP	Alcatel & TCL Old Models	2	05-22-2000 07:48

02-07-2006, 22:31	#2 (permalink)
VsH-GsM Banned Join Date: Nov 2001 Location: IRAN Age: 38 Posts: 3,679 Member: 7444 Status: Offline Sonork: 100.99999 Thanks Meter: 10,013	i think you flashed phone with "Repair" option, your phone is repaired, but you have to flash it again without repair option.

02-09-2006, 14:01	#4 (permalink)
VsH-GsM Banned Join Date: Nov 2001 Location: IRAN Age: 38 Posts: 3,679 Member: 7444 Status: Offline Sonork: 100.99999 Thanks Meter: 10,013	i know, with repair may be you get error in last of process, NO PROBLEM AT ALL. now your phone is 100% ok, rebuild IMEI and well done

02-09-2006, 15:45	#5 (permalink)
_-oRc-_ Freak Poster Join Date: Aug 2002 Location: Poland / Kolbuszowa Age: 43 Posts: 409 Member: 14277 Status: Offline Thanks Meter: 2	ok i was rebild imei phone power on but he work very very slow and all graphic have lots of artefacts.... how can i solve it... any other solution...

02-09-2006, 15:49	#6 (permalink)
VsH-GsM Banned Join Date: Nov 2001 Location: IRAN Age: 38 Posts: 3,679 Member: 7444 Status: Offline Sonork: 100.99999 Thanks Meter: 10,013	Try another flash file.. may be FW_BUG.

02-09-2006, 15:50	#7 (permalink)
VsH-GsM Banned Join Date: Nov 2001 Location: IRAN Age: 38 Posts: 3,679 Member: 7444 Status: Offline Sonork: 100.99999 Thanks Meter: 10,013	Of Course Without Repair Function Now !!!!

02-11-2006, 18:08	#8 (permalink)
_-oRc-_ Freak Poster Join Date: Aug 2002 Location: Poland / Kolbuszowa Age: 43 Posts: 409 Member: 14277 Status: Offline Thanks Meter: 2	i try all firmware first flash with rapair option then full reset, imei rebuild, unlock and again flash again but without reapir option and notthing new... phone still runnig up but has lost of artefacts on display and running very very slow... pls mr vsh-gsm help... phone is new and can't be a hardware problem... how can i write full flash (with repair function) .... because allways when i try i get error about 95% nad can't finish it...