E700 preloader OK tnen stop - this is not usb-smart error just need help - GSM-Forum

PSG · 03-24-2006, 14:25

hi
i have e700. somebody left it under flasher all night (sghfd064.exe Alex/AT - good flasher). phone was flashed OK but under left under cable all night (com 115200 flashing is really slow so man don't want to wait 30min and left it to morning)
after powerON phone worked ok 5min... then frezzz. no powerON again
now only preloader is loaded but second loader can't be uploaded.

i have to know what dead. flashIC (ram section) or CPU - what to change.
i think cpu is ok coz tring to load a loader for flashing.

all IC is glued(but glue is not hard as in nokia)

or maybe there is a solution... ?

please help if anybody know how.

info from samsung 1.08:
Power On Or Insert Autoignition Cable
Power On Or Insert Autoignition Cable
Wait...Ok. Time: 00:01s, 51ms
Sending Preloader...Ok Time: 00:02s, 73ms
Baud_Rate: 115200
Unsupported Baud_Rate!

i tried with all baud speed.

-BULL- · 03-25-2006, 15:53

try to upload fullflash to this phone on UFS or other flasher,because from time to time I also have a problem like this with my USB smart samsung flasher

good luck

03-24-2006, 14:25	#1
PSG No Life Poster Join Date: May 2003 Location: POLAND Age: 33 Posts: 960 Member: 27761 Status: Offline Thanks: 1 Thanked 16 Times in 12 Posts	E700 preloader OK tnen stop - this is not usb-smart error just need help hi i have e700. somebody left it under flasher all night (sghfd064.exe Alex/AT - good flasher). phone was flashed OK but under left under cable all night (com 115200 flashing is really slow so man don't want to wait 30min and left it to morning) after powerON phone worked ok 5min... then frezzz. no powerON again now only preloader is loaded but second loader can't be uploaded. i have to know what dead. flashIC (ram section) or CPU - what to change. i think cpu is ok coz tring to load a loader for flashing. all IC is glued(but glue is not hard as in nokia) or maybe there is a solution... ? please help if anybody know how. info from samsung 1.08: Power On Or Insert Autoignition Cable Power On Or Insert Autoignition Cable Wait...Ok. Time: 00:01s, 51ms Sending Preloader...Ok Time: 00:02s, 73ms Baud_Rate: 115200 Unsupported Baud_Rate! i tried with all baud speed.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-25-2006, 15:53	#2
-BULL- Junior Member Join Date: Feb 2006 Location: BY Posts: 16 Member: 237265 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	try to upload fullflash to this phone on UFS or other flasher,because from time to time I also have a problem like this with my USB smart samsung flasher good luck