CRUISER V10 All Bugs Discuss Here - GSM-Forum

Kashif Khan · 09-28-2006, 21:38

As all we knows that Cruiser's new version has been released now.
IF anyone get the Bug plz Discuss Here.
BR
Kashif Khan

e-person · 09-28-2006, 22:52

Connected a k800i via Teleway "Cruiser" 4in1 cable.

After some fiddling with the cable I managed to connect the phone and got a FLASH ARM option, so is it possible to flash a k800i with it?

Other than that, I have been able to connect that phone only once. Maybe cables with DB2020 are going to be a problem. Could Lead possibly provide a way to connect via USB cables?

TPS · 09-29-2006, 05:18

Quote:

Originally Posted by e-person

Connected a k800i via Teleway "Cruiser" 4in1 cable.

After some fiddling with the cable I managed to connect the phone and got a FLASH ARM option, so is it possible to flash a k800i with it?

Other than that, I have been able to connect that phone only once. Maybe cables with DB2020 are going to be a problem. Could Lead possibly provide a way to connect via USB cables?

Version 10.00 (28th September 2006, 91st release):

· Implemented complete support for programming DB2020 emptyboards.

· Enabled flashing of DB2020 CID49 phones, although for customizing an EMMA smartcard is required.

· Added support for customizing DB2020-based phones by means of an EMMA smartcard.

· Added support for manipulating filesystem of DB2020-based phones by means of an EMMA smartcard.

· Updated built-in customizations for K610, K790, K800, W850 and Z610.

· Updated built-in customizations for W300 and K310.

· Added support for red CID49 DB2020 "EROM Upgrade". It is accessible via the Repair EROM button.

· Updated langpack description for K310 and K800. More later on.

· Minor change to the Replace certificate function.

· Updated TAC list for J220i, K300i, K310i, K510i, K610i, K750i, K800i, T106, W300i, W550i, W810i, Z300i, Z525a and Z530i.

· Several applets updated.

· Fixed some communication issues.

· Added K750/W800 testpoint images.

· Added support for identification of Ericsson-based Sagem phones (CID38).

· Much work still in progress

danielkhaw · 09-29-2006, 05:56

What happen to this ?

System diagnostics passed.
Version 10.00 ready!

[ --- Attach to Phone --- ]
Connecting via UC-10 Universal Cable...
Powering on the phone...
Baseband chip ID: 0x9900
Protocol version: 3.1
Baudrate = 460800Bd
Trying CID49 recovery applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 2s
Initializing phone hardware...
Applet ID: 060712 1258 ALU4_CXC1329130_DB2020_SEMC_CERTLOADER_P3G
Flash manufacturer: Intel
Flash ID: 0x897E
OTP Security Level: 1 (Retail)
OTP CID: 49
Phone hardware initialized OK

[ --- Flash Main Firmware --- ]
Flash file: "DB2020_EROM_Thelma_Red49_R3A011_signed_by_Brown49 .erom5"
Waiting for flash file to load...
Preparing to program flash...
Baudrate = 921600Bd
The applet ignored baudrate change request!
Programming flash...

Flash color/CID mismatch!
Script error: Flash error [10.00.74]
[ --- Turn off Phone --- ]
Turning off phone...
Phone turned off.
Phone automatically detached.

alayne · 09-29-2006, 06:41

where to find new version?
Seems like support area is updating and only lg flashes available.
can somebody please share theirs.
Thnx.

luckycool · 09-29-2006, 07:06

can anyone explain about emma card.
what is this?
can we buy it and how expensive ?
where can we use it ?
and any other info plz

MG77 · 09-29-2006, 07:23

Quote:

Originally Posted by luckycool

can anyone explain about emma card.
what is this?
can we buy it and how expensive ?
where can we use it ?
and any other info plz

Use search! Is it hard to do?

luzer · 09-29-2006, 08:03

I guess now EMMA 3 is needed but this could give you an idea ... http://forum.gsmhosting.com/vbb/showthread.php?t=210235

sunnyc · 09-29-2006, 08:14

get from support very easy just go support & downlode
http://www.mycruiser.org/cruiser/sup...M\Cruiser_V10_

chip_2000 · 09-29-2006, 08:47

W300 flash raw fs error

System diagnostics passed.
Version 10.00 ready!

[ --- Attach to Phone --- ]
Connecting via UC-10 Universal Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2010_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 060206 1814 NPACXC125872_COMPACTPRODUCTION_ID_LOADER P3H
Flash manufacturer: Intel
Flash ID: 0x897E
OTP Security Level: 1 (Retail)
OTP CID: 49
Sending applet...
All threads terminated.

[ --- Attach to Phone --- ]
Connecting via UC-10 Universal Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2010_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 060206 1814 NPACXC125872_COMPACTPRODUCTION_ID_LOADER P3H
Flash manufacturer: Intel
Flash ID: 0x897E
OTP Security Level: 1 (Retail)
OTP CID: 49
Sending applet...
All threads terminated.

[ --- Attach to Phone --- ]
Connecting via UC-10 Universal Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2010_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 060206 1814 NPACXC125872_COMPACTPRODUCTION_ID_LOADER P3H
Flash manufacturer: Intel
Flash ID: 0x897E
OTP Security Level: 1 (Retail)
OTP CID: 49
Sending applet...
All threads terminated.

[ --- Attach to Phone --- ]
Connecting via UC-10 Universal Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2010_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 060206 1814 NPACXC125872_COMPACTPRODUCTION_ID_LOADER P3H
Flash manufacturer: Intel
Flash ID: 0x897E
OTP Security Level: 1 (Retail)
OTP CID: 49
All threads terminated.

[ --- Attach to Phone --- ]
Connecting via UC-10 Universal Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2010_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 060206 1814 NPACXC125872_COMPACTPRODUCTION_ID_LOADER P3H
Flash manufacturer: Intel
Flash ID: 0x897E
OTP Security Level: 1 (Retail)
OTP CID: 49
Sending applet...
Applet ID: 060305 1000 104_DB2010_FLASHLOADER_P5G_CXC1326738
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK

[ --- Flash Raw File System --- ]
Flash file: "W300i_CXC1123203_Russia_R9A031_Red49.cw3fs"
Waiting for flash file to load...
Preparing to program flash...
Baudrate = 921600Bd
The applet ignored baudrate change request!
Programming flash...

Error flashing block at address: 0x45810000
Script error: Flash error [10.00.75]

i try again get this

Flash color/CID mismatch!
Script error: Flash error [10.00.74]

next try again

Error flashing block at address: 0x45A10000
Script error: Flash error [10.00.75]

WHAT IS IT ????

cable work 100% batt full charging

**.::Gsmdenis::.** · 09-29-2006, 08:49

just testing W810C , hope will have a good luck for me !

follow is the part of the logs :

Quote:

System diagnostics passed.
Version 10.00 ready!

[ --- Attach to Phone --- ]
通过连接Fighter USB Cable...
正在开机...
基带码片ID: 0x8040
拟定版本: 3.1
波特率=460800Bd
索尼爱立信手机发现
电话CID= 49
手机颜色红色
Flash certificate: A1_DB2010_49_RED
Trying Red CID49 flash applet...
所有 threads终止

[ --- Attach to Phone --- ]
通过连接Fighter USB Cable...
正在开机...
基带码片ID: 0x8040
拟定版本: 3.1
波特率=460800Bd
Trying CID49 recovery applet...

[ --- Detach Phone --- ]
所有 threads终止
所有 threads终止

[ --- Attach to Phone --- ]
通过连接Fighter USB Cable...
正在开机...
基带码片ID: 0x8040
拟定版本: 3.1
波特率=460800Bd
Trying CID49 recovery applet...
传送applet prologue...
发送applet 主体
Time spent entering bootstrap: 1s
正在初始化电话硬件...
Applet ID: 051005 1353 NPA4_CXC1326739_SEMC_COMPACTCERTLOADER R1B
flash制造者 ST Microelectronics
写ID: 0x2019
OTP Security Level: 1 (Retail)
OTP CID: 49
正常的RSA保护
电话硬件初始化完成

[ --- Change Certificate Color --- ]
电话自动分离

[ --- Attach to Phone --- ]
通过连接Fighter USB Cable...
正在开机...
基带码片ID: 0x8040
拟定版本: 3.1
波特率=460800Bd
手机颜色没有
Flash certificate: -
所有 threads终止

[ --- Attach to Phone --- ]
通过连接Fighter USB Cable...
正在开机...
基带码片ID: 0x8040
拟定版本: 3.1
波特率=460800Bd
索尼爱立信手机发现
电话CID= 49
手机颜色红色
Flash certificate: A1_DB2010_49_RED
Trying Red CID49 flash applet...
传送applet prologue...
发送applet 主体
Time spent entering bootstrap: 1s
正在初始化电话硬件...
Applet ID: 060206 1814 NPACXC125872_COMPACTPRODUCTION_ID_LOADER P3H
flash制造者 ST Microelectronics
写ID: 0x2019
OTP Security Level: 1 (Retail)
OTP CID: 49
发送applet...
Applet ID: 060305 1000 104_DB2010_FLASHLOADER_P5G_CXC1326738
RSA protection state cannot be determined for this CID.
电话硬件初始化完成

[ --- Flash Main Firmware --- ]
Flash 文件: "W810c_CXC1250317_China_R4DB005_Red49.cw81sw"
Flash 文件: "W810i_CXC1250324_APAC_R4DB005_Red49.cw81fs"
等待flash文件加载...
程序准备 flash...
波特率=921600Bd
The applet ignored baudrate change request!
程式编制flash...
时间: 00:09:11
程序准备 flash...
波特率=921600Bd
The applet ignored baudrate change request!
程式编制flash...
时间: 00:03:55
Flash 处理完成

BR.,

Denis

zeozea · 09-29-2006, 09:57

k800i flashing ok but customize not working , now phone in"configuration error..."

Mainboard · 09-29-2006, 10:31

Quote:

Originally Posted by zeozea

k800i flashing ok but customize not working , now phone in"configuration error..."

if you don't have emma smart card you have now damaged phone... why? because you CAN'T READ ....

Quote:

Version 10.00 (28th September 2006, 91st release):

· Implemented complete support for programming DB2020 emptyboards.

· Enabled flashing of DB2020 CID49 phones, although for customizing an EMMA smartcard is required.

also don't post same message in multiple threads...

e-person · 09-29-2006, 10:57

Quote:

Originally Posted by zeozea

k800i flashing ok but customize not working , now phone in"configuration error..."

Do a complete phone with any of the existing online servers, after buying credits. I have used Davinci, since I had two credits with them.

gorbulas · 09-29-2006, 11:07

@ zeozea

Where did you get the Flashfiles from

09-28-2006, 21:38	#1 (permalink)
Kashif Khan No Life Poster Join Date: Oct 2004 Location: Holland China Brazil Age: 43 Posts: 3,815 Member: 88016 Status: Offline Thanks Meter: 320	CRUISER V10 All Bugs Discuss Here As all we knows that Cruiser's new version has been released now. IF anyone get the Bug plz Discuss Here. BR Kashif Khan

09-29-2006, 11:07	#15 (permalink)
gorbulas No Life Poster Join Date: Sep 2003 Location: somewhere nice and warm Age: 61 Posts: 728 Member: 38800 Status: Offline Thanks Meter: 1	@ zeozea Where did you get the Flashfiles from Last edited by gorbulas; 09-29-2006 at 11:25.

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Cruiser v10.34 bugs	Bakl	Cruiser Suite	3	02-14-2007 12:01
UST Pro II v3.10 All Bugs Discuss Here !!!	Kashif Khan	UST Pro II	34	12-28-2006 22:56
..:: Cruiser V10.05 -All Bugs Discuss Here ::..	Kashif Khan	Cruiser Suite	9	11-18-2006 10:23
! Cruiser Version 10.03 All bugs Discuss Here !	Kashif Khan	Cruiser Suite	46	11-13-2006 08:15
Universal Box 1.9.8 all Bugs Discuss here!!!	Kashif Khan	Universalbox	2	10-21-2006 14:02

09-28-2006, 22:52	#2 (permalink)
e-person No Life Poster Join Date: Nov 2004 Posts: 729 Member: 91799 Status: Offline Thanks Meter: 3	Connected a k800i via Teleway "Cruiser" 4in1 cable. After some fiddling with the cable I managed to connect the phone and got a FLASH ARM option, so is it possible to flash a k800i with it? Other than that, I have been able to connect that phone only once. Maybe cables with DB2020 are going to be a problem. Could Lead possibly provide a way to connect via USB cables?

09-29-2006, 05:56	#4 (permalink)
danielkhaw Freak Poster Join Date: Apr 2002 Location: Malaysia Age: 44 Posts: 436 Member: 10977 Status: Offline Thanks Meter: 55	What happen to this ? System diagnostics passed. Version 10.00 ready! [ --- Attach to Phone --- ] Connecting via UC-10 Universal Cable... Powering on the phone... Baseband chip ID: 0x9900 Protocol version: 3.1 Baudrate = 460800Bd Trying CID49 recovery applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 2s Initializing phone hardware... Applet ID: 060712 1258 ALU4_CXC1329130_DB2020_SEMC_CERTLOADER_P3G Flash manufacturer: Intel Flash ID: 0x897E OTP Security Level: 1 (Retail) OTP CID: 49 Phone hardware initialized OK [ --- Flash Main Firmware --- ] Flash file: "DB2020_EROM_Thelma_Red49_R3A011_signed_by_Brown49 .erom5" Waiting for flash file to load... Preparing to program flash... Baudrate = 921600Bd The applet ignored baudrate change request! Programming flash... Flash color/CID mismatch! Script error: Flash error [10.00.74] [ --- Turn off Phone --- ] Turning off phone... Phone turned off. Phone automatically detached.

09-29-2006, 06:41	#5 (permalink)
alayne No Life Poster Join Date: Jul 2005 Age: 44 Posts: 956 Member: 162029 Status: Offline Thanks Meter: 202	where to find new version? Seems like support area is updating and only lg flashes available. can somebody please share theirs. Thnx.

09-29-2006, 07:06	#6 (permalink)
luckycool No Life Poster Join Date: May 2005 Location: UK Posts: 1,071 Member: 143848 Status: Offline Thanks Meter: 125	can anyone explain about emma card. what is this? can we buy it and how expensive ? where can we use it ? and any other info plz

09-29-2006, 08:03	#8 (permalink)
luzer No Life Poster Join Date: Nov 2003 Location: GT Posts: 2,802 Member: 44659 Status: Offline Thanks Meter: 363	I guess now EMMA 3 is needed but this could give you an idea ... http://forum.gsmhosting.com/vbb/showthread.php?t=210235

09-29-2006, 08:14	#9 (permalink)
sunnyc No Life Poster Join Date: Jan 2004 Location: Life's a Journey Age: 44 Posts: 3,556 Member: 49495 Status: Offline Sonork: 100.9 & 100.12345 Thanks Meter: 1,026	get from support very easy just go support & downlode http://www.mycruiser.org/cruiser/sup...M\Cruiser_V10_

09-29-2006, 08:47	#10 (permalink)
chip_2000 No Life Poster Join Date: Feb 2003 Location: UKRAINE Age: 46 Posts: 1,008 Member: 22400 Status: Offline Thanks Meter: 44	W300 flash raw fs error System diagnostics passed. Version 10.00 ready! [ --- Attach to Phone --- ] Connecting via UC-10 Universal Cable... Powering on the phone... Baseband chip ID: 0x8040 Protocol version: 3.1 Baudrate = 460800Bd Sony Ericsson phone detected. Phone CID: 49 Phone color: Red Flash certificate: A1_DB2010_49_RED Trying Red CID49 flash applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 1s Initializing phone hardware... Applet ID: 060206 1814 NPACXC125872_COMPACTPRODUCTION_ID_LOADER P3H Flash manufacturer: Intel Flash ID: 0x897E OTP Security Level: 1 (Retail) OTP CID: 49 Sending applet... All threads terminated. [ --- Attach to Phone --- ] Connecting via UC-10 Universal Cable... Powering on the phone... Baseband chip ID: 0x8040 Protocol version: 3.1 Baudrate = 460800Bd Sony Ericsson phone detected. Phone CID: 49 Phone color: Red Flash certificate: A1_DB2010_49_RED Trying Red CID49 flash applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 1s Initializing phone hardware... Applet ID: 060206 1814 NPACXC125872_COMPACTPRODUCTION_ID_LOADER P3H Flash manufacturer: Intel Flash ID: 0x897E OTP Security Level: 1 (Retail) OTP CID: 49 Sending applet... All threads terminated. [ --- Attach to Phone --- ] Connecting via UC-10 Universal Cable... Powering on the phone... Baseband chip ID: 0x8040 Protocol version: 3.1 Baudrate = 460800Bd Sony Ericsson phone detected. Phone CID: 49 Phone color: Red Flash certificate: A1_DB2010_49_RED Trying Red CID49 flash applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 1s Initializing phone hardware... Applet ID: 060206 1814 NPACXC125872_COMPACTPRODUCTION_ID_LOADER P3H Flash manufacturer: Intel Flash ID: 0x897E OTP Security Level: 1 (Retail) OTP CID: 49 Sending applet... All threads terminated. [ --- Attach to Phone --- ] Connecting via UC-10 Universal Cable... Powering on the phone... Baseband chip ID: 0x8040 Protocol version: 3.1 Baudrate = 460800Bd Sony Ericsson phone detected. Phone CID: 49 Phone color: Red Flash certificate: A1_DB2010_49_RED Trying Red CID49 flash applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 1s Initializing phone hardware... Applet ID: 060206 1814 NPACXC125872_COMPACTPRODUCTION_ID_LOADER P3H Flash manufacturer: Intel Flash ID: 0x897E OTP Security Level: 1 (Retail) OTP CID: 49 All threads terminated. [ --- Attach to Phone --- ] Connecting via UC-10 Universal Cable... Powering on the phone... Baseband chip ID: 0x8040 Protocol version: 3.1 Baudrate = 460800Bd Sony Ericsson phone detected. Phone CID: 49 Phone color: Red Flash certificate: A1_DB2010_49_RED Trying Red CID49 flash applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 1s Initializing phone hardware... Applet ID: 060206 1814 NPACXC125872_COMPACTPRODUCTION_ID_LOADER P3H Flash manufacturer: Intel Flash ID: 0x897E OTP Security Level: 1 (Retail) OTP CID: 49 Sending applet... Applet ID: 060305 1000 104_DB2010_FLASHLOADER_P5G_CXC1326738 RSA protection state cannot be determined for this CID. Phone hardware initialized OK [ --- Flash Raw File System --- ] Flash file: "W300i_CXC1123203_Russia_R9A031_Red49.cw3fs" Waiting for flash file to load... Preparing to program flash... Baudrate = 921600Bd The applet ignored baudrate change request! Programming flash... Error flashing block at address: 0x45810000 Script error: Flash error [10.00.75] i try again get this Flash color/CID mismatch! Script error: Flash error [10.00.74] next try again Error flashing block at address: 0x45A10000 Script error: Flash error [10.00.75] WHAT IS IT ???? cable work 100% batt full charging

09-29-2006, 09:57	#12 (permalink)
zeozea Freak Poster Join Date: Nov 2005 Location: Chisinau, Moldova Posts: 208 Member: 201953 Status: Offline Thanks Meter: 3	k800i flashing ok but customize not working , now phone in"configuration error..."