Help : how to unlock Z140V

[demo2000]

Hello i tried this cods on Z140V :

Power on your phone (Models Z105, Z107V, Z140, Z140V, Z500, Z500V, etc.......)

1- Enter code *7465625*28782# without a sim in the phone
2- Phone will display "Auto Subset Lock: Activated!"
3- Enter code *7465625*28638# without a sim again
3- Phone will display "Auto Network Lock: Activated!"
4- Now insert the sim and enjoy! Phone is Unlocked!
(NOTE: When you change sim to other operator repeat this process to unlock it for that operator also)
...
http://s13.invisionfree.com/prounlock/ar/t90.htm

And now it stand on display Phone Freeze :

Incorrect SIM
Network Lock

What to do please ?

Thanks

[jawad8305]

do this method I unlocked a freezed zv10 with winimei ,working 100/100

[jawad8305]

http:///vbb/showth...ht=zv10+unlock

[demo2000]

Originally Posted by jawad8305

http:///vbb/showth...ht=zv10+unlock

I have this message :

Check Serial Comunication. ....
Serial COM. - GOOD Puenteo ok
Wait! Detect USB Port...!
SUCCESS: DETECT USB PORT...
USB Port Open Success
IMEIRead Success
Read MePersolalisation...
Read Master Control Lock Fail

Please refer to the attached images.

Thanks

[..::hotlovercool4::..]

which tools u have ??? post reply
wink shafeeq
geo mobiles

[demo2000]

Originally Posted by hotlovercool4

which tools u have ??? post reply
wink shafeeq
geo mobiles

I have this message :

Check Serial Comunication. ....
Serial COM. - GOOD Puenteo ok
Wait! Detect USB Port...!
SUCCESS: DETECT USB PORT...
USB Port Open Success
IMEIRead Success
Read MePersolalisation...
Read Master Control Lock Fail

when i use this method :

Originally Posted by -minorKa-

This is a post to help everyone that has a Samsung Z serie mobile that is locked and/or freezed.

The explanation for how to do is already on this forum but to make it easier for everyone to find it, I'm making my 1 for all (Z series phones) post.

The supported phones for this process are (the Z series phones):

(as listed in the program)
SGH-Z140
SGH-Z140V
SGH-Z300
SGH-Z300M
SGH-Z500
SGH-Z500V
SGH-ZM60
SGH-ZV30
SGH-ZX10


To unlock and/or unfreeze these phones you must follow the next steps:

- Download and install QUALCOMM UNLOCKER (http://www.megaupload.com/?d=39RITNDZ)

- Install the propper USB drivers for your mobile (if it comes with CD, if that CD has the USB drivers, it's those ones that you should use, otherwise, download: http://org.downloadcenter.samsung.com/downloadfile/ContentsFile.aspx?CDSite=HQ&CttFileID=380589&CDCtt Type=SW&ModelType=N&ModelName=SGH-Z500&VPath=SW/200505/20050526174209031_USBDriver.exe).

- Have the proper USB cable for your mobile (if it comes with one, it's that one that you should use).

- After having your phone correctly connected to your computer (using the USB cable) and turned ON (with or without the SIM inserted), set the mobile modem COM port as one between port 2 to port 9 (ports 2 and 9 included). [Note]

- Connect (with something like a metallic wire for example) the 2nd and 3rd pins of the COM1 port (behind your computer), like the example below (imagine it like a COM - 9 pinned - port):
…………………………………………... ______
……………………………………………( · — · · )
…………………………………………...\ · · · · /
'…………………………………………... ¯¯¯¯¯

- Before attempting to unlock your mobile (though everything looks OK), click on the "Read Settings" to be completely sure that the program is completely detecting your mobilephone and to make it able to unlock it (by reading the phone's internal codes).

- After all the previous steps... Press UNLOCK. It will remove all the phone locks and the phone freeze (if needed).




[Note]: To set the COM port, run the QUALCOMM UNLOCKER program and click on "Check Modem", then, in the "Phone and Modem Options" menu, click on the "Modem" tab, select your mobilephone on the modem list and then click proprieties. In the modem proprieties menu, you must click on the "Advanced" tab and then click on "Advanced Port Settings". In the "Advanced Port Settings menu, there should be a dropdown list, in the bottom of the window, to select the desired COM port for your mobile. The port must not have 2 digits - like COM10 or above - and it's not convenient to be set as COM1. Select one of the unused and confirm everything by clicking all "OK" buttons.




Then you'll have your phone completely free of lockings and freezings. I did it with my own Z300 and, after doing it just like I described, it finally worked.

Hope this thread was usefull and enjoy your phones without restrictions.

http:///vbb/showth...ht=zv10+unlock

Please help

[asmodi]

Do that its works 100 % : all you need is :

- Z500 simple data cable
- Ns-dongle cracked
- phone drivers

Install driver , connect phone , run ns-dongle , choose Z107 , click into unlock , that's all and your phone is unlocked

[demo2000]

Originally Posted by asmodi

Do that its works 100 % : all you need is :

- Z500 simple data cable
- Ns-dongle cracked
- phone drivers

Install driver , connect phone , run ns-dongle , choose Z107 , click into unlock , that's all and your phone is unlocked

Please would give us answers for the following questions :

1- The Z500 simple data cable is it indispensible for this method or we can use Z140V simple data cable ?

2- Are you using the following ?

Originally Posted by -minorKa-

- Connect (with something like a metallic wire for example) the 2nd and 3rd pins of the COM1 port (behind your computer), like the example below (imagine it like a COM - 9 pinned - port):
…………………………………………... ______
……………………………………………( · — · · )
…………………………………………...\ · · · · /
'…………………………………………... ¯¯¯¯¯

Thanks

[asmodi]

No u can use Z140v data cable and no need to put the metallic wire in the com1 port , enjoy
and there is 2 versions of ns-dongle cracked u must use the one with the bleu interface

[hooman_mobile1]

Hello guys
when I enter the code : *7465625*28782# without a sim in the phoneT phone displayed : "Already exist!" whats this? and what can I do with my z140 phone?
thanx alot