2 Pieces NOKIA 6680 Blinking After Flashing Using MT-BOX - GSM-Forum

handilak · 04-26-2007, 11:48

Here what happened...I'm upgrade firmware NOKIA 6680 RM-36 to a newest firmware : M-36_dp_v_9.00_MCUSW5.050440_APAC and below here is the result :

VPP is DISABLED.
BB5 PM back Phone is in: Unknown mode
Processing File: RM36_5.050440_B5.C0R
Boot...
rap3gv2_2nd.fg
RAP3Gv3_algo.fg
helen3_2nd.fg
h3_sam_nand_gbbm.fg
Backup: \GSM_35566400037252_0.r3c
Erase RAP3 [00000000 - 00509309]
Erase RAP3 [006A0000 - 006BFFFF]
Erase RAP3 [006DF000 - 006EFFFF]
Erase RAP3 [00700000 - 007EFFFF]
Erase APE [00000000 - 0000FFFF]
Erase APE [00010000 - 0001FFFF]
Erase APE [00020000 - 000203FF]
Erase APE [00050000 - 01F5BFFF]
Erase[37.34 MB]...
Waiting response for 320 Sec...in 3.84s
Flash[20.25 MB]...in 79.28s
* * Processed file in 96.16 seconds
Processing File: RM36_5.050440_B5.v36
Boot...
rap3gv2_2nd.fg
RAP3Gv3_algo.fg
helen3_2nd.fg
h3_sam_nand_gbbm.fg
Erase APE [01060000 - 01F5BFFF]
Erase[14.98 MB]...
Waiting response for 320 Sec...in 1.95s
Flash[4.35 MB]...in 12.83s
* * Processed file in 25.02 seconds
* * * Phone flashing done in 2:15 minutes
Post Flash serial tunning of phone....
Pooling mode for full factory set...
V 04wk47_m_v14.2.1/09-11-06/RM-36 (c) Noki
IMEI: 355664000372528
Factory Default Settings...OK
Pooling mode for profile update...
RM-36\RM36_5.050440_als.pp
Sending Profile to Phone...OK
Phone is in: Offline mode

Phone SelfTest status:
Passed: TAHVOINT
Passed: UEM_CBUS_IF
Passed: EAR_DATA_LOOP
Passed: SIM_CLK_LOOP
Passed: SIM_IO_CTRL_LOOP
Passed: BACKUP_BATT
Passed: SLEEPCLK_FREQ
* Passed: SIM_LOCK
* Passed: SECURITY
* Passed: PWR_KEY
* Passed: CURRENT_CONS
* Passed: CMT_APE_WAKEUP
* Passed: HOOKINT
* Passed: BTEMP
* Passed: CDSP_RF_BB_IF
* Passed: CDSP_RF_SUPPLY
* Passed: CDSP_TX_IQ
* Passed: CDSP_TXC_DATA
* Passed: CDSP_WCDMA_TX_POWER
* Passed: CDSP_RX_PLL_PHASE_LOCK
* Passed: CDSP_TX_PLL_PHASE_LOCK
* Passed: CDSP_RX_IQ_LOOP_BACK
* Passed: CDSP_PWR_DETECTOR_BIAS
* Passed: CDSP_GSM_TX_POWER
Phone is executing , delay... 15sec
Pooling for phone 10sec...
* Passed: KEYBOARD_STUCK
* Passed: LPRF_IF
* Passed: CAMERA_IF
* Passed: LPRF_AUDIO_LINES
* Passed: MAIN_LCD_IF
* Passed: BT_WAKEUP
Force Execute of NonExecuted:
Summary: Passed(30), NotExucuted(0), OtherStatus(0)

And I try to restore certificate from backup file .r3c

hone is in: Unknown mode
Model: RM-36 ( RM-36)
V 04wk47_m_v14.2.1/09-11-06/RM-36 (c) Noki
IMEI: 355664000372528
Boot...
rap3gv2_2nd.fg
RAP3Gv3_algo.fg
helen3_2nd.fg
h3_sam_nand_format.fg
BOOT OK...
Send NPC Certificate
Send Variant Certificate

RAP3 Certificate sent SUCCESSFULLY

============= Set FBus mode for info =============
Pins:
Mbus 1, Box Tx 1, Box Rx 1, Bsi 0
Phone is in: Unknown mode
Model: RM-36 ( RM-36)
V 04wk47_m_v14.2.1/09-11-06/RM-36 (c) Noki
IMEI: 355664000372528
Factory Default Settings(max wait 2 min)... Successfull

2 pieces NOKIA 6680 Now goes blinking !!! Any idea where I go wrong!!!!

To Griffin team any solution for this?

Note : all 2 Mobile Phones are in good condition never repaired before!

regards,

Handy

Bohosh · 04-26-2007, 12:36

Flash ur phone with this PPM file: RM36_5.050440_B5.v05
And all will be ok

goldenploto · 04-26-2007, 20:54

my dear found bugs with this flash in package 30 the phone flashing well and enter to local mode and all option done but when power on phone it hanging
for this flashing with other package ppm

irfanamin2 · 04-27-2007, 10:03

@Bohosh & goldenploto is right try to change pakage ppm file.

handilak · 04-27-2007, 13:32

@Bohosh - goldenploto - irfanamin2

that's not from ppm problem, i also already try to restore certificate run SX4 function still don't work...

already RUN Self Test for ST_SECURITY_TEST ..... Passed

Note : the phone keeps blinking many times (LCD LED and keypad section LED keeps lighton also, only NOKIA sign blinking)

To Mr. moredator here maybe you can help this problem?

handilak · 04-27-2007, 13:51

Finally .....Problem SOLVED by JAF.

enzawigroup · 04-27-2007, 18:36

big thnx 4 jaf

br

Nizamo · 05-28-2007, 17:33

Quote:

Originally Posted by handilak

Finally .....Problem SOLVED by JAF.

how did u solve ur problem brother i had the same problem after flashing on jaf too

SoftMobile · 05-28-2007, 22:11

The problem is cable if use JAF cable with MT box.
The cable need small modification

johnmene · 05-28-2007, 23:51

yes this is my problem too,,, everytime i flash RM36_5.050440 the phone getting BLINKING NOKIA.

stefanusrudy · 05-29-2007, 06:19

downgrade it with RM-36 v8.00 mcusw 5.050407

04-26-2007, 11:48	#1 (permalink)
handilak Crazy Poster Join Date: Dec 2001 Location: In my room... Posts: 55 Member: 7794 Status: Offline Thanks Meter: 9	2 Pieces NOKIA 6680 Blinking After Flashing Using MT-BOX Here what happened...I'm upgrade firmware NOKIA 6680 RM-36 to a newest firmware : M-36_dp_v_9.00_MCUSW5.050440_APAC and below here is the result : VPP is DISABLED. BB5 PM back Phone is in: Unknown mode Processing File: RM36_5.050440_B5.C0R Boot... rap3gv2_2nd.fg RAP3Gv3_algo.fg helen3_2nd.fg h3_sam_nand_gbbm.fg Backup: \GSM_35566400037252_0.r3c Erase RAP3 [00000000 - 00509309] Erase RAP3 [006A0000 - 006BFFFF] Erase RAP3 [006DF000 - 006EFFFF] Erase RAP3 [00700000 - 007EFFFF] Erase APE [00000000 - 0000FFFF] Erase APE [00010000 - 0001FFFF] Erase APE [00020000 - 000203FF] Erase APE [00050000 - 01F5BFFF] Erase[37.34 MB]... Waiting response for 320 Sec...in 3.84s Flash[20.25 MB]...in 79.28s * * Processed file in 96.16 seconds Processing File: RM36_5.050440_B5.v36 Boot... rap3gv2_2nd.fg RAP3Gv3_algo.fg helen3_2nd.fg h3_sam_nand_gbbm.fg Erase APE [01060000 - 01F5BFFF] Erase[14.98 MB]... Waiting response for 320 Sec...in 1.95s Flash[4.35 MB]...in 12.83s * * Processed file in 25.02 seconds * * * Phone flashing done in 2:15 minutes Post Flash serial tunning of phone.... Pooling mode for full factory set... V 04wk47_m_v14.2.1/09-11-06/RM-36 (c) Noki IMEI: 355664000372528 Factory Default Settings...OK Pooling mode for profile update... RM-36\RM36_5.050440_als.pp Sending Profile to Phone...OK Phone is in: Offline mode Phone SelfTest status: Passed: TAHVOINT Passed: UEM_CBUS_IF Passed: EAR_DATA_LOOP Passed: SIM_CLK_LOOP Passed: SIM_IO_CTRL_LOOP Passed: BACKUP_BATT Passed: SLEEPCLK_FREQ * Passed: SIM_LOCK * Passed: SECURITY * Passed: PWR_KEY * Passed: CURRENT_CONS * Passed: CMT_APE_WAKEUP * Passed: HOOKINT * Passed: BTEMP * Passed: CDSP_RF_BB_IF * Passed: CDSP_RF_SUPPLY * Passed: CDSP_TX_IQ * Passed: CDSP_TXC_DATA * Passed: CDSP_WCDMA_TX_POWER * Passed: CDSP_RX_PLL_PHASE_LOCK * Passed: CDSP_TX_PLL_PHASE_LOCK * Passed: CDSP_RX_IQ_LOOP_BACK * Passed: CDSP_PWR_DETECTOR_BIAS * Passed: CDSP_GSM_TX_POWER Phone is executing , delay... 15sec Pooling for phone 10sec... * Passed: KEYBOARD_STUCK * Passed: LPRF_IF * Passed: CAMERA_IF * Passed: LPRF_AUDIO_LINES * Passed: MAIN_LCD_IF * Passed: BT_WAKEUP Force Execute of NonExecuted: Summary: Passed(30), NotExucuted(0), OtherStatus(0) And I try to restore certificate from backup file .r3c hone is in: Unknown mode Model: RM-36 ( RM-36) V 04wk47_m_v14.2.1/09-11-06/RM-36 (c) Noki IMEI: 355664000372528 Boot... rap3gv2_2nd.fg RAP3Gv3_algo.fg helen3_2nd.fg h3_sam_nand_format.fg BOOT OK... Send NPC Certificate Send Variant Certificate RAP3 Certificate sent SUCCESSFULLY ============= Set FBus mode for info ============= Pins: Mbus 1, Box Tx 1, Box Rx 1, Bsi 0 Phone is in: Unknown mode Model: RM-36 ( RM-36) V 04wk47_m_v14.2.1/09-11-06/RM-36 (c) Noki IMEI: 355664000372528 Factory Default Settings(max wait 2 min)... Successfull 2 pieces NOKIA 6680 Now goes blinking !!! Any idea where I go wrong!!!! To Griffin team any solution for this? Note : all 2 Mobile Phones are in good condition never repaired before! regards, Handy

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
6085 Cant Flash using Mt-Box using FBus Cable	helplease	MT-BOX	3	11-14-2008 06:48
N95 killed after downgrade using mt-box	patric	Nokia Base Band 5 ( BB-5 )	15	07-08-2008 23:53
nokia uem OTP imei read using mt-box?	beega	MT-BOX	1	11-27-2006 09:34

04-26-2007, 12:36	#2 (permalink)
Bohosh No Life Poster Join Date: Aug 2002 Posts: 1,948 Member: 14741 Status: Offline Thanks Meter: 119	Flash ur phone with this PPM file: RM36_5.050440_B5.v05 And all will be ok

04-26-2007, 20:54	#3 (permalink)
goldenploto No Life Poster Join Date: Feb 2006 Location: iraq Posts: 716 Member: 234567 Status: Offline Thanks Meter: 45	my dear found bugs with this flash in package 30 the phone flashing well and enter to local mode and all option done but when power on phone it hanging for this flashing with other package ppm

04-27-2007, 10:03	#4 (permalink)
irfanamin2 No Life Poster Join Date: Sep 2004 Posts: 3,784 Member: 82423 Status: Offline Thanks Meter: 1,203	@Bohosh & goldenploto is right try to change pakage ppm file.

04-27-2007, 13:32	#5 (permalink)
handilak Crazy Poster Join Date: Dec 2001 Location: In my room... Posts: 55 Member: 7794 Status: Offline Thanks Meter: 9	@Bohosh - goldenploto - irfanamin2 that's not from ppm problem, i also already try to restore certificate run SX4 function still don't work... already RUN Self Test for ST_SECURITY_TEST ..... Passed Note : the phone keeps blinking many times (LCD LED and keypad section LED keeps lighton also, only NOKIA sign blinking) To Mr. moredator here maybe you can help this problem?

04-27-2007, 13:51	#6 (permalink)
handilak Crazy Poster Join Date: Dec 2001 Location: In my room... Posts: 55 Member: 7794 Status: Offline Thanks Meter: 9	Finally .....Problem SOLVED by JAF.

04-27-2007, 18:36	#7 (permalink)
enzawigroup No Life Poster Join Date: Apr 2005 Location: lebanon Age: 49 Posts: 1,514 Member: 141363 Status: Offline Sonork: 100.1594362 Thanks Meter: 148	big thnx 4 jaf br

05-28-2007, 22:11	#9 (permalink)
SoftMobile No Life Poster Join Date: Feb 2002 Location: Hong Kong Posts: 4,330 Member: 9290 Status: Offline Sonork: 100.57287 Thanks Meter: 35	The problem is cable if use JAF cable with MT box. The cable need small modification

05-28-2007, 23:51	#10 (permalink)
johnmene Freak Poster Join Date: Mar 2005 Location: riyadh Age: 44 Posts: 190 Member: 125111 Status: Offline Thanks Meter: 25	yes this is my problem too,,, everytime i flash RM36_5.050440 the phone getting BLINKING NOKIA.

05-29-2007, 06:19	#11 (permalink)
stefanusrudy No Life Poster Join Date: Mar 2005 Location: S7°1x'xxx" - E112°4x'xxx" Posts: 2,807 Member: 128035 Status: Offline Thanks Meter: 317	downgrade it with RM-36 v8.00 mcusw 5.050407