GSM-Forum

Go Back   GSM-Forum > Product Support Sections > Hard/Software-Products (official support) > J.A.F - Just Another Flasher > J.A.F. by Odeon


Reply
 
Thread Tools Display Modes
Old 05-25-2007, 17:19   #1
DAVI_1
No Life Poster
 
DAVI_1's Avatar
 
Join Date: Jun 2004
Age: 29
Posts: 792
Member: 69305
Status: Offline
Thanks: 2
Thanked 100 Times in 52 Posts
N76 usb flashing ok!

Searching for phone...Detected P-KEY: 9000****
P-key nokia module version 01.00
Init usb communication...
Found
Reading battery value...4087 mV
Init usb flashing...
Reading flashid... CMT: 003000EC, APE: 00000000
Verifing ADL communication... Status byte 7
Using 006.044.048
Elf2flash 07.02.000 RAW loader...
Patching RAW boot step1...
Patching RAW boot step2...
Patching RAW boot step3...
Sending RAW Loader...
....................Loader Sent!
Stage 2 starting..............Phone prepared OK!
Waiting for the phone to boot...
Phone is in flash mode...
CMT blocks: 557, APE blocks: 0
Erasing cmt...
Processing C:\Program Files\Nokia\Phoenix\Products\RM-135\RM135_10.0.035_prd.C00...
Erasing cmt zone 00040000 - 00082FFF ...
Erasing cmt zone 00083400 - 0087FFFF ...
Erasing cmt zone 00B80000 - 07B3FFFF ...

Processing C:\Program Files\Nokia\Phoenix\Products\RM-135\RM135_10.0.035_prd.V14...
Erasing cmt zone 03D80000 - 0537FFFF ...
Processing C:\Program Files\Nokia\Phoenix\Products\RM-135\RM135_10.0.035_022_000_U01_uda.fpsx...
Erasing cmt zone 05380000 - 07B3FFFF ...
Writing cmt...
Processing C:\Program Files\Nokia\Phoenix\Products\RM-135\RM135_10.0.035_prd.C00...
Sending CMT HASH for ADA
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending CMT HASH for RAP3NAND
Sending CMT HASH for PASUBTOC
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
cmt->PAPUB keys already sent...
Sending CMT HASH for SOS*UPDAPP
Sending CMT HASH for SOS*DSP0
Sending CMT HASH for SOS*ISASW
Sending CMT HASH for SOS*CORE
Sending CMT HASH for SOS+ROFS
Processing C:\Program Files\Nokia\Phoenix\Products\RM-135\RM135_10.0.035_prd.V14...
Sending CMT HASH for SOS+ROFX
Processing C:\Program Files\Nokia\Phoenix\Products\RM-135\RM135_10.0.035_022_000_U01_uda.fpsx...
Rebooting...
Pooling phone...
MCUSW: V 06wk41v21.4
05-04-07
RM-135
(c) Nokia
APESW: 10.0.035
VariantSW: 10.0.03514.01
Prodcode: 0543089
DCT4/BB5 counter: ***
Done!
THANKS JAF ...
  Reply With Quote
Old 05-25-2007, 17:29   #2
..::Sunil::..
No Life Poster
 
..::Sunil::..'s Avatar
 
Join Date: Jan 2007
Location: India
Age: 20
Posts: 2,716
Member: 432364
Status: Offline
Thanks: 69
Thanked 147 Times in 83 Posts
Thanks for sharing...



B.r.
Sunil.
  Reply With Quote
Old 06-01-2007, 16:53   #3
galactob
Junior Member
 
Join Date: Jul 2006
Posts: 22
Member: 313953
Status: Offline
Thanks: 5
Thanked 0 Times in 0 Posts
where i find flash for n76 10.0.035?????????

thnks
  Reply With Quote
Old 06-01-2007, 17:23   #4
Fast Unlocker
Product Supporter
 
Fast Unlocker's Avatar
 
Join Date: Dec 2004
Location: Furious Team ... GPGIndustries
Age: 31
Posts: 4,791
Member: 95960
Status: Offline
Sonork: 1574721
Thanks: 663
Thanked 2,092 Times in 342 Posts
Nice sharing but flash file is currpoted so From where did you get that

RGDS
  Reply With Quote
Old 06-01-2007, 17:27   #5
..::Sunil::..
No Life Poster
 
..::Sunil::..'s Avatar
 
Join Date: Jan 2007
Location: India
Age: 20
Posts: 2,716
Member: 432364
Status: Offline
Thanks: 69
Thanked 147 Times in 83 Posts
Yes this version is not available on support...Hope viru sir will upload soon...



B.r.
Sunil.

Last edited by ..::Sunil::..; 06-01-2007 at 17:50.
  Reply With Quote
Old 06-01-2007, 18:19   #6
DAVI_1
No Life Poster
 
DAVI_1's Avatar
 
Join Date: Jun 2004
Age: 29
Posts: 792
Member: 69305
Status: Offline
Thanks: 2
Thanked 100 Times in 52 Posts
it was available before about 2 days...
so i was lucky , and download it...
but only APAC... not EMEA...
so JAF team do something about this error...
thanks...
  Reply With Quote
Old 06-04-2007, 18:01   #7
vid
No Life Poster
 
Join Date: May 2000
Location: Sometime office sometime Home
Age: 35
Posts: 592
Member: 1367
Status: Offline
Sonork: 88476
Thanks: 5
Thanked 1 Time in 1 Post
I have problem with NEW N76 flashing,2day before flash a phone(N76) ok with 1.98.20,but after update to 1.98.22 have this problem.

some 1 have flashing success N76 with 1.98.22???

Here is my LOG with USB flashing.

FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-135\RM135_10.0.032_prd.C00
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-135\RM135_10.0.032_prd.V14
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-135\RM135_10.0.032_022_000_U01_uda.fpsx
APE Variant file: NONE
Languages in ppm: English,Simpl Chinese,Trad Chinese,APAC1,Singapore,Malaysia
Done!
Backing up CRT...
Detected P-KEY: 9000xxxx
P-key nokia module version 01.00
Init usb communication...
Reading IMEI...
C:\Program Files\ODEON\JAF\ProgData\3539540xxxxxxxx_CRT_backu p_183xxxx.pm
Done!
Backup CRT OK!
Searching for phone...Detected P-KEY: 9000xxxx
P-key nokia module version 01.00
Init usb communication...
Found
Reading battery value...4033 mV
Init usb flashing...
Reading flashid... Error getting flash id...
  Reply With Quote
Old 08-31-2007, 06:04   #8
vipermsq
Junior Member
 
Join Date: Jul 2003
Age: 29
Posts: 27
Member: 33563
Status: Offline
Thanks: 1
Thanked 0 Times in 0 Posts
I have the same problem, any have idea about it ??? the following is my log

JAF version 1.98.29
Detected PKEY: 90008CD4
Card life counter: 94.03%
P-key nokia module version 01.00
Detected version: 01.AE, Driver version: 0, Library version: 0
JAF DCT4/BB5 LOADERS DIR: C:\Archivos de programa\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: C:\Archivos de programa\SarasSoft\UFS\UFS_DCTxBB5\Products\
JAF USB LOADERS DIR: C:\Archivos de programa\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Archivos de programa\ODEON\JAF\Flash3\
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Switching to serial...
Powering the phone...
Failed! Aborting!
Searching for phone...Detected P-KEY: 90008CD4
P-key nokia module version 01.00
Init usb communication...
Found
MCU SW version: V 06wk41v21.3
30-03-07
RM-135
(c) Nokia
HW version: 0500
PCI version:
RFIC version:  17141714
DSP version: dsprap_pb06w41v23
APE SW Core version: 10.0.032
APE Variant version: 10.0.03214.01
APE Test version: rm135_ENO_x_2007wk07v0.040
Retu version: 15
Tahvo version: 22
APE HW version: 256
APE ADSP SW version: 256
APE BT version: HCI Version 8 (rev. 0). LMP Version 32 (rev. 4127). Manufacturer 13064.
Production serial number: CXA164399
Product code:
Module code:
Basic production code: 0530835
Flash code:
Order number:
Product specific data:
Long production SN: 0
ATO:
Default SN type:
IMEI plain: 353954010605427
IMEI spare to net: 3A 35 59 04 01 06 45 02
IMEI SV to net: 33 35 59 04 01 06 45 02 F8

LOCK STATUS:

CONFIG KEY: 2440700000000000
Provider: AT&T;U.S.A. (3650)
Key Code count: 0

Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 2:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 3:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 4:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 5:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 6:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 7:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN

Loading INI list...
Detected P-KEY: 90008CD4
P-key nokia module version 01.00
Init usb communication...
Reading product code...
Product Code:

FILES SET FOR FLASHING:
MCU Flash file: C:\Archivos de programa\SarasSoft\UFS\UFS_DCTxBB5\Products\RM-135\RM135_10.0.035_prd.C00
PPM Flash file: C:\Archivos de programa\SarasSoft\UFS\UFS_DCTxBB5\Products\RM-135\RM135_10.0.035_prd.V10
CNT Flash file: C:\Archivos de programa\SarasSoft\UFS\UFS_DCTxBB5\Products\RM-135\RM135_10.0.035_022_000_U01_uda.fpsx
APE Variant file: NONE
Languages in ppm: English,Chinese
Done!
Changing flashing settings...
Detected P-KEY: 90008CD4
P-key nokia module version 01.00
Init usb communication...
Reading...
FILES SET FOR FLASHING:
MCU Flash file: C:\Archivos de programa\SarasSoft\UFS\UFS_DCTxBB5\Products\RM-135\RM135_10.0.035_prd.C00
PPM Flash file: C:\Archivos de programa\SarasSoft\UFS\UFS_DCTxBB5\Products\RM-135\RM135_10.0.035_prd.V01
CNT Flash file: C:\Archivos de programa\SarasSoft\UFS\UFS_DCTxBB5\Products\RM-135\RM135_10.0.035_022_000_U01_uda.fpsx
APE Variant file: NONE
Languages in ppm: English,French,Italian,Spanish,German,Portuguese
Backing up CRT...
Detected P-KEY: 90008CD4
P-key nokia module version 01.00
Init usb communication...
Reading IMEI...
C:\Archivos de programa\ODEON\JAF\ProgData\353954010605427_CRT_ba ckup_233308.pm
Done!
Backup CRT OK!
Searching for phone...Detected P-KEY: 90008CD4
P-key nokia module version 01.00
Init usb communication...
Found
Reading SW version...06wk41v21.3 10.0.032
Reading battery value...3776 mV
Init usb flashing...
Reading flashid... Error getting flash id...
  Reply With Quote
Old 08-31-2007, 06:53   #9
stefanusrudy
No Life Poster
 
stefanusrudy's Avatar
 
Join Date: Mar 2005
Location: S7°1x'xxx" - E112°4x'xxx"
Posts: 2,796
Member: 128035
Status: Offline
Thanks: 7
Thanked 270 Times in 77 Posts
@vipermsg:
put sim card into phone,
do not select offline mode,
flash with sim card inside.

regards
  Reply With Quote
Old 08-31-2007, 22:35   #10
vipermsq
Junior Member
 
Join Date: Jul 2003
Age: 29
Posts: 27
Member: 33563
Status: Offline
Thanks: 1
Thanked 0 Times in 0 Posts
i tried with the simcard inside but it didnīt work

i returned the phone to the client

thanks a lot


VIPER
  Reply With Quote
Old 08-31-2007, 23:17   #11
damabib
No Life Poster
 
damabib's Avatar
 
Join Date: Jan 2005
Location: EVERYWHERE U GO
Age: 32
Posts: 4,374
Member: 106026
Status: Online
Sonork: 100.77890
Thanks: 40
Thanked 62 Times in 49 Posts
Quote:
Originally Posted by vipermsq View Post
i tried with the simcard inside but it didnīt work

i returned the phone to the client

thanks a lot


VIPER
SEEMS HAVE HARDAWARE MIXUP...
  Reply With Quote
Old 08-31-2007, 23:58   #12
viru
Product Manager
 
viru's Avatar
 
Join Date: Jan 2006
Location: Shenzhen , China
Age: 22
Posts: 8,756
Member: 222198
Status: Offline
Sonork: 100.102981
Thanks: 128
Thanked 1,382 Times in 302 Posts
Quote:
Originally Posted by vipermsq View Post
i tried with the simcard inside but it didnīt work

i returned the phone to the client

thanks a lot


VIPER
This is sure prob with offline mode is used for flashing.


B.R.,
Viru
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 00:36.


GSMCity - GSM Hosting - 1999-2009
Page generated in 0.31054 seconds with 6 queries