[blang]

Originally Posted by HakkanR

here is log

Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.0.105.0 / wxWidgets 3.1.0-W-U started.
Operating system ver.: Windows 7 (build 7601, Service Pack 1).
For support and updates visit http://easy-jtag.com
Initialising: SAMSUNG GT-I9200 Config ver.:1.00
I/O Level set to : 2200 mV
Box S/N: ** ,FW Ver.: 01.48
Connecting to Target...
JTAG device: MSM8230AB. 
CPU IDCODE : 0x4F1F0F0F Mfg.: 0x787, Part: 0xf1f0, Ver.: 0x4
CPU Manufacturer: Samsung , CPU Name: ARM7GEN
JTAG device: MSM8230AB. 
CPU IDCODE : 0x308A30E1 Mfg.: 0x070, Part: 0x08a3, Ver.: 0x3
CPU Manufacturer: QUALCOMM , CPU Name: MSM8230AB
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting emmc memory parameters of bank (0) ...
EMMC #0 : ID : 0x00000045 Name : SEM08G Size : 7.3 G , (15269888) Blocks
EMMC #1 : ID : 0x00000045 Name : SEM08G Size : 2.0 M , (4096) Blocks
eMMC flash device(s) found, Device ID : 0x00450000
NAND Writing BOOT, PIT, MD5...
eMMC Write OK! Elapsed time: 24.258387s (168.849 KiB/s)
NAND Writing SBL1...
eMMC Write OK! Elapsed time: 1.265073s (101.180 KiB/s)
NAND Writing SBL2...
eMMC Write OK! Elapsed time: 2.355134s (108.699 KiB/s)
NAND Writing SBL3...
eMMC Write OK! Elapsed time: 5.738329s (89.225 KiB/s)
NAND Writing ABOOT...
eMMC Write OK! Elapsed time: 18.375051s (111.455 KiB/s)
NAND Writing RPM...
eMMC Write OK! Elapsed time: 3.649209s (140.304 KiB/s)
NAND Writing TZ...
eMMC Write OK! Elapsed time: 4.271244s (119.871 KiB/s)
All Done.

now phone is in Quallcomm Hs-USB QdLoader (9008) mode.
before jtag operation, phone sw ver is 4.2.2

new phones have protect from downgrade.
we will prepare new version of rcp after few days.