View Single Post
Old 06-13-2014, 15:56   #3007 (permalink)
mubarak2344
No Life Poster
 
mubarak2344's Avatar
 
Join Date: Aug 2013
Location: CHENNAI, TAMILNADU,INDIA
Posts: 730
Member: 2001848
Status: Offline
Sonork: 100.1658212
Thanks Meter: 581
cyclone successfully flashed nokia asha 501 rm-902 with usb

nokia asha 501 security lock.... done by usb flashing with cyclone......

use same product code flash file by searching in google....... only needed 3 files mcu.fpsx,rofs.fpsx,image.fpsx

see my log......

Processing pre flash tasks...
Backing up RPL...
RPL Creation started...
Processing CMT Part...
[Nokia USB Flashing Generic]: Port opened OK!
Proceeding with Recovery Mode...
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
XGold223 ROM Detected
XGold223: Continuing Peripherial Booting...
CMT_SYSTEM_ASIC_ID: 00000C2016100040
CMT_PUBLIC_ID: 9F54C76F59AEC06B498A2C098ADC245C6BEA1200
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 125FC72605B5C4E48A9E0225084D2579
CMT_BOOT_ROM_CRC: 53588225
CMT_SECURE_ROM_CRC: 2F54C676
CMT Ready!
Searching for BootCode: DualLine 32Bit
XG223_v11_usb2nd.fg, Type: 2nd Boot Loader, Rev: 1024.12.30.1, Algo: XG223
Using NEW BB5 FLASHING PROTOCOL
XGold223 2nd Boot Ready
Searching for BootCode: DualLine 32Bit
XG223_v11_usbalg.fg, Type: Algorithm, Rev: 1024.12.30.1, Algo: XG223_V0 ALG
XGold223 Algo Ready
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 7E4AA99553DB48A5F2DD39E02FA1B862ECB0EF5E
APE Subsystem Not Found
NPC Backup stored in "9F54C76F59AEC06B498A2C098ADC245C6BEA1200_6132014_ 70052 PM.NPC.CMT.crt"
[Nokia USB Phonet]: Port opened OK!
Set to Recovery Mode Finished
Storing Product Code...
Storing PSN...
Storing HWID...
Trying to store Simlock...
Reading Configuration Key...
Hashing...
Reading SHA1-RSA Signature...
Reading SHA1-HMAC Signature...
Storing Simlock...
Trying to store WMDRM RPL...
Reading Keys...
Failed to read WMDRM Key
Reading Security Block...
Security block OK and saved to "RM-902_12345610654321_6132014_70102 PM.SecurityBlock.PM"
WARNING: "9F54C76F59AEC06B498A2C098ADC245C6BEA1200.A10001ED " Not Exists, Will read it...
Reading CYC file from phone...
Booting CMT...
[Nokia USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia USB Flashing Generic]: Port opened OK!
XGold223 ROM Detected
XGold223: Continuing Peripherial Booting...
CMT_SYSTEM_ASIC_ID: 00000C2016100040
CMT_PUBLIC_ID: 0000000000000000000000000000000000000000
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 00000000000000000000000000000000
CMT_BOOT_ROM_CRC: 53588225
CMT_SECURE_ROM_CRC: 2F54C676
CMT Ready!
Prepare phone failed with message -> Not found required CMT Secondary Loader
Neither CYC file and exists or failed to read it from phone (Failed to Boot / Prepare Phone)
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
XGold223 ROM Detected
XGold223: Continuing Peripherial Booting...
CMT_SYSTEM_ASIC_ID: 00000C2016100040
CMT_PUBLIC_ID: 9F54C76F59AEC06B498A2C098ADC245C6BEA1200
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 125FC72605B5C4E48A9E0225084D2579
CMT_BOOT_ROM_CRC: 53588225
CMT_SECURE_ROM_CRC: 2F54C676
CMT Ready!
Searching for BootCode: DualLine 32Bit
XG223_v11_usb2nd.fg, Type: 2nd Boot Loader, Rev: 1024.12.30.1, Algo: XG223
Using NEW BB5 FLASHING PROTOCOL
XGold223 2nd Boot Ready
Searching for BootCode: DualLine 32Bit
XG223_v11_usbalg.fg, Type: Algorithm, Rev: 1024.12.30.1, Algo: XG223_V0 ALG
XGold223 Algo Ready
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 7E4AA99553DB48A5F2DD39E02FA1B862ECB0EF5E
APE Subsystem Not Found
Storing NPC...
Storing CCC...
Storing HWC...
CMT VARIANT Not Found
CMT PARTNERC Not Found
Restoring from Recovery Mode...
Restored from Recovery Mode OK
Restarting MCU...
RPL Saved OK
RPL backup thread finished, continuing...
Pre flash tasks finished, continuing...
Processing 0C6682B0_rm902_14.0.5.mcusw.fpsx (CMT)...
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
XGold223 ROM Detected
XGold223: Continuing Peripherial Booting...
CMT_SYSTEM_ASIC_ID: 00000C2016100040
CMT_PUBLIC_ID: 9F54C76F59AEC06B498A2C098ADC245C6BEA1200
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 125FC72605B5C4E48A9E0225084D2579
CMT_BOOT_ROM_CRC: 53588225
CMT_SECURE_ROM_CRC: 2F54C676
CMT Ready!
0C6682B0_rm902_14.0.5.mcusw.fpsx, Type: Flash Image, Algo: XG223, XG223_V0 ALG
Searching for BootCode: DualLine 32Bit
XG223_v11_usb2nd.fg, Type: 2nd Boot Loader, Rev: 1024.12.30.1, Algo: XG223
Using NEW BB5 FLASHING PROTOCOL
XGold223 2nd Boot Ready
Searching for BootCode: DualLine 32Bit
XG223_v11_usbalg.fg, Type: Algorithm, Rev: 1024.12.30.1, Algo: XG223_V0 ALG
XGold223 Algo Ready
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 7E4AA99553DB48A5F2DD39E02FA1B862ECB0EF5E
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x40000000-0x4003FFFF, NOR
EraseArea[0,CMT]: 0x47E00000-0x47E3FFFF, NOR
EraseArea[0,CMT]: 0x40060000-0x426FFFFF, NOR
EraseArea[0,CMT]: 0x47E40000-0x47F1FFFF, NOR
Waiting 320s for erasure finish...
Erase taken 15.850s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT ISSW Certificate...
Writing CMT MEMSET Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT LOADER Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT UPDAPP Certificate...
Writing CMT MCUSW Certificate...
Programming Status OK!
All blocks written OK! Time taken 8.49s
Flashing Speed: 35019.19 kBit/S
Processing 0C6682B0_rm902_14.0.5.mcusw.fpsx (APE)...
Processing 1A9A3C84_rm902_14.0.2_059S9Q4_i1_336_02_423848.rof s.fpsx (CMT)...
1A9A3C84_rm902_14.0.2_059S9Q4_i1_336_02_423848.rof s.fpsx, Type: Flash Image, Algo: XG223, XG223_V0 ALG
PAPUBKEYS Hash for CMT: 7E4AA99553DB48A5F2DD39E02FA1B862ECB0EF5E
Started group flash erase
EraseArea[0,CMT]: 0x42700000-0x437FFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 4.446s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PPM Certificate...
Programming Status OK!
All blocks written OK! Time taken 2.137s
Flashing Speed: 36799.13 kBit/S
Processing 1A9A3C84_rm902_14.0.2_059S9Q4_i1_336_02_423848.rof s.fpsx (APE)...
Processing 95D5D15C_rm902_14.0.2_059S9Q4_i1_336_02_423848.ima ge.fpsx (CMT)...
95D5D15C_rm902_14.0.2_059S9Q4_i1_336_02_423848.ima ge.fpsx, Type: Flash Image, Algo: XG223, XG223_V0 ALG
PAPUBKEYS Hash for CMT: 7E4AA99553DB48A5F2DD39E02FA1B862ECB0EF5E
Started group flash erase
EraseArea[0,CMT]: 0x43800000-0x47DFFFFF, NOR
Waiting 320s for erasure finish...
Erase taken 15.23s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 6.755s
Flashing Speed: 38188.10 kBit/S
Processing 95D5D15C_rm902_14.0.2_059S9Q4_i1_336_02_423848.ima ge.fpsx (APE)...
Restarting MCU...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
Factory defaults OK
Reading info...
[Nokia USB Phonet]: Port opened OK!
MCU Version V 14.0.5
MCU Date 21-04-14
Product RM-902 (Nokia RM-902)
Manufacturer (c) Nokia
IMEI 35789805xxxxxxx
Mastercode 112454466
IMEI Spare 3A75980825872300
IMEI SV 3375980825872330F1000000
PPM 6005837808669cd22b32d0ce8b01c9fc92ad0c5e
PSN C81EEA5BI
Product Code 059T4X1
Module Code 0205341
Basic Product Code 059P9V6
PSD 0000000000000000
LPSN 0
WLAN MAC 2CCC15B1F2B4
APE Variant 0000000000000000000000000000000000000000
TAHVO RM-902-14.0.5-059T4X1-14.0.2-14.0.2
AHNE 4
HW 4000
UPP MFR:0xff,DEV:0xff1a,REV:0xf011
RFIC Integrated to main ASIC
LCD TPO
BT 0101-0.1.C
AEM 43362a2-5.96.13.0
Simlock Server SIMLOCK SERVER
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!
 
 
Page generated in 0.10419 seconds with 7 queries